Measurement of turbulence and pitch of the airstream in the 5' × 7' tunnel of Indian Institute of Science

This article does not have an abstract

Reaction of Bis(diethyl dithiocarbamato)nickel(II) with 4-Methyl- & 4-Vinyl-pyridines

745-74

Magnetohydrodynamic Couette Flow and Heat Transfer in a Rotating System

The influence of electrode geometry for the MHD Couette flow in the presence of the Hall current and heat transfer of a conducting liquid in a rotating system has been studied

Design of Hybrid Full Adder using 6T-XOR-Cell for High Speed Processor Designs Applications

Hybrid-logic implementation is highly suitable in the design of a full adder circuit to attain high-speed low-power consumption, which helps to design n any high speed ALUs that can be used in varies processors and applicable for high speed IoT- Application. XOR/XNOR-cell, Hybrid Full Adder (HFA) are the fundamental building block to perform any arithmetic operation. In this paper, different types of high-speed, low-power 6T-XOR/XNOR-cell designs are being proposed and simulated results are presented. The proposed HFA is simulated using a cadence virtuoso environment in a 45nm technology with supply voltage as 0.8V at 1GHz. The proposed HFA consumes a power of 1.555uw, and the delay is 36.692ns.  Layout designs are drawn for both 6T-XOR/XNOR-cell, and 1- bit HFA designs. XOR/XNOR-cells are designed based on the combination of normal CMOS-inverter and Pass Transistor Logic (PTL). Which is used in the design of high end device processors such as ALU that can be implemented for the IoT- design applications

Oxygen delivery system in pre-hospital emergency care in india GVK EMRI 108: a review article

The goal of an effective emergency medical system should be to provide universal emergency care along with assured quality. Oxygen is often used drug in the pre hospital. Oxygen delivery can be monitored by pulse oximetry, typically with a goal of reversing hypoxemia. This paper describes the importance of oxygen in emergency care and its contribution to reducing avoidable death and disability. It also highlights the oxygen delivery systems and training processes /protocols in ambulance based pre-hospital care. In addition, it also shares the usage rates of oxygen and delivery methods in thermal and electrical burns in 108 GVK EMRI, India ambulances. A descriptive study methodology was adopted for explaining the training and pre-hospital care processes of oxygen delivery. Retrospective study method was adopted to measure the oxygen utilization rates in management of burns cases in 108 ambulances in the year 2015. EMTs consistently assessed vitals and provided oxygen to patients’. When EMTs found that patients’ had oxygen saturation less than 95%, they provided supplemental oxygen 95% of the times. EMTs though adhering to the routine use of oxygen in 9 out of 10 cases “where indicated, refresher training should focus on use of oxygen in special circumstances and the benefit to be closely monitored for favourable clinical outcomes”. There is a need to study such common and important essential pre-hospital interventions in all types of emergencies being served

A NEW STABILITY-INDICATING RP-HPLC-PDA METHOD FOR SIMULTANEOUS ESTIMATION OF TRIPLICATE MIXTURE OF RAMIPRIL, ATORVASTATIN AND CLOPIDOGREL IN TABLET DOSAGE FORM

Objective: To develop a novel, accurate, precise and linear reverse phase high performance liquid chromatographic (RP-HPLC) method for simultaneous quantitative estimation of ramipril, atorvastatin and clopidogrel in Atamra-CV tablet and validate as per international conference on harmonization (ICH) guidelines and to perform the force degradation studies using the developed method.Methods: In the present work, the good chromatographic separation was achieved isocratically using a shim-pack HPLC Kromasil 150 mm x 4.6 mm, 5 m. m. And mobile phase consisting of 0.05 M potassium dihydrogen orthophosphate pH 3 adjusted with orthophosphoric acid and acetonitrile in the ratio (52:48), at flow rate 1 ml/min and column temperature (30 °C). The effluents obtained were monitored at 210 nm with the UV-visible detector.Results: The retention time of ramipril, atorvastatin and clopidogrel was found to be 2.893 min, 5.012 min and 6.102 min respectively. The linearity of ramipril, atorvastatin and clopidogrel was found in the range of 25-150 % and the correlation coefficient for ramipril, atorvastatin and clopidogrel were>0.999. The high recovery values (98%-101%) indicate a satisfactory accuracy. The low percent relative standard deviation (% RSD) values in the precision study reveals that the method is precise. The three-drug samples were subjected to stress conditions of acidic and alkaline hydrolysis, oxidation, photolysis and thermal degradation. The proposed method proved to be stability-indicating by resolution of the analytes from their forced-degradation products.Conclusion: The developed method is novel, simple, precise, rapid, accurate and reproducible for simultaneous estimation of ramipril, atorvastatin and clopidogrel tablet dosage form. Hence the proposed method may find practical applications as a quality-control tool in the simultaneous analysis of the three drugs in combined dosage forms in quality-control laboratories. The proposed method was made use of photodiode array (PDA) as a tool for peak identification and purity confirmation

Preparation of transversely isotropic test specimen of natural FRP composite - an innovative approach-II

Fiber Reinforced Plastic (FRP) composites can be broadly classified as synthetic and natural, based on the type of fibers incorporated. Abundantly available natural fibers like toddy palm, sisal, jute and banana are attracting the attention of researchers due to ever increasing demand for lighter, stronger and eco-friendly materials from the industry. However, natural fibers are limited in length, not so uniform in size and behave differently in different atmospheric conditions. Added to this, the inherent tendency of natural fibers to twist and curl in dry conditions poses many problems to researchers while preparing test specimens. Researchers in general and academicians in particular are handicapped by non-availability of relevant literature on fabrication techniques to prepare natural FRP composite test specimens close to their analytical models. Present paper addresses typical problems faced by researchers during preparation of unidirectional continuous fiber reinforced composite test specimen ensuring transversely isotropic nature. Using simple hand tools coupled with a few precautions taken as described herein, prospective researchers can condition natural fibers and prepare composite specimen to suit their requirements.&nbsp