26 research outputs found
Análise de timol em cera de abelha por micro-extracção em fase sólida (SPME)
A aplicação contínua de acaricídas lipofílicos sintéticos no tratamento das
abelhas conduz a uma acumulação que depende da frequência, lipofilicidade e
quantidade de princípio activo utilizada. Este efeito é mais acentuado na cera
de abelha que no mel, no entanto, e porque a persistência destes resíduos é
elevada, provoca o aparecimento de resistências e a perda do seu efeito
acaricida.[1] Esta razão levou à pesquisa de outros compostos alternativos não
tóxicos e não persistentes, com efeito sobre o ácaro das abelhas, Varroa
Jacobsoni. Entre estes compostos encontra-se o timol, um composto fenólico,
volátil, presente no tomilho. Dos diversos componentes dos óleos essenciais
este é sem dúvida o que demonstrou maior efeito acaricida, utilizando-se no
tratamento das abelhas directamente ou como componente de diversas
formulações.[2] Em Portugal, foi introduzido muito recentemente sob a forma
comercial de APIGUARD: um gel, à base de timol, que controla termicamente a
libertação do princípio activo.
O controlo dos resíduos de timol na cera de abelha e no mel é assim um
desafio actual quer do ponto de vista sanitário quer de qualidade alimentar.
A micro-extracção em fase sólida (SPME) é uma técnica de preparação de
amostras que se baseia na sorção de analítos no revestimento de uma fibra de
sílica fundida e posterior desorção térmica no injector de um cromatógrafo em
fase gasosa (GC). Para além de combinar num único processo etapas de
extracção, purificação e concentração dos analitos, a técnica de SPME
apresenta uma série de vantagens relativamente às técnicas de extracção
convencionais, como a extracção líquido-líquido e extracção em fase sólida,
nomeadamente a sua relativa simplicidade e rapidez, reduzido custo e não
utilização de solventes para a extracção de analitos, para além de permitir a
extracção por imersão directa na amostra gasosa ou líquida e extracção por
amostragem do espaço-de-cabeça da amostra líquida ou sólida.[3] Ao contrário
das técnicas tradicionais, que permitem uma extracção quantitativa dos
analitos, a técnica de SPME baseia-se num equilíbrio de partição do analito.
Esta particularidade torna a técnica de SPME bastante sensível a parâmetros
experimentais que possam afectar os coeficientes de partição dos analitos e,
consequentemente, a sensibilidade e reprodutibilidade dos resultados.[4]
O objectivo deste trabalho é o desenvolvimento de uma metodologia para a
análise de timol em ceras contaminadas, utilizando como padrão interno a
benzofenona. Em primeiro lugar, procedeu-se à optimização da técnica através
da determinação da quantidade de cera, temperatura de análise e período de
contacto da fibra com o espaço-de-cabeça da amostra mais adequados para o
caso em estudo. Numa segunda fase, procedeu-se à análise de diversas
lâminas de cera contaminadas propositadamente com timol e sujeitas a
diferentes condições de armazenamento: em frio, ao ar e em estufa.
Finalmente, procedeu-se à construção da curva de calibração e quantificação
do timol presente nas diversas amostras de cera analisadas.
Considerando-se os resultados, para os níveis de contaminação avaliados, as
condições analíticas mais adequadas ocorrem com a utilização de 1 g de cera,
mantendo-se a fibra em contacto com o espaço-de-cabeça durante 40 minutos
a uma temperatura de 60 ºC. Nestas condições experimentais foi possível obter
uma boa correlação linear (r2=0,990) no intervalo de concentrações [3,5-14
mg/g]. A quantidade de timol encontrada nas amostras é significativamente
inferior à colocada durante o processo de fabrico das lâminas, pelo que o
processo de conservação não é o mais adequado, sendo evidente uma menor
quantidade de timol quando a lâmina de cera é colocada na estufa
Технологическая подготовка производства изготовления детали "Вал выходящий" на станках с ЧПУ
В результате работы был проведен конструкторский анализ детали, разработан технологический процесс, выбрано оборудование для производства детали, составлены управляющие программы для станков с ЧПУ и разработаны карты наладки к ним. Рассчитаны припуски и допуски на технологические размеры,режимы резания и нормы времени. Предложены пути решения вопроса об экологической безопасности. Рассчитана экономическая эффективность.As a result of the work, a design analysis of the part was carried out, a technological process was developed, equipment for the production of parts was selected, control programs for CNC machine tools were compiled, and adjustment maps were developed for them. The allowances and tolerances for technological dimensions, cutting modes and time norms are calculated. Suggested ways to address the issue of environmental safety. Economic efficiency has been calculated
Change in Augmentation Index during NOS Inhibition, an Index of Basal NO Production, Is an Independent Determinant of Large-Artery Function
Background/Aims: Arterial wave reflection, measured as augmentation index (AIx), and central pulse pressure (PP) closely predict cardiovascular events. We hypothesized that basal nitric oxide (NO) production would be a determinant of AIx and central PP. Methods: AIx and central PP were assessed at baseline by pulse wave analysis in 86 male subjects across a wide range of age, blood pressure and lipid values. The basal NO production in the cardiovascular system was then determined as change in AIx during NO synthase blockade with N G -monomethyl- L -arginine ( L -NMMA, 3.25 mg/kg). Results: AIx increased from 17.5 8 14.6 to 23.1 8 14.2 during L -NMMA infusion (p ! 0.001). The increase in AIx during NO synthase blockade, an index of basal NO production, was inversely related to baseline central AIx and PP, and positively to PP amplification. Multiple linear regression analyses disclosed that in addition to age and mean blood pressure, change of AIx to L -NMMA is a strong and independent determinant of baseline central AIx, central PP and PP amplification. Conclusion: Greater change of AIx to L -NMMA, an index of basal NO production, is associated with better large-ar- tery function. Therefore, therapeutic interventions which increase the basal NO production might be particularly effective in reducing cardiovascular risk
Synthesis of S-Layer Conjugates and Evaluation of Their Modifiability as a Tool for the Functionalization and Patterning of Technical Surfaces
Chemical functional groups of surface layer (S-layer) proteins were chemically modified in order to evaluate the potential of S-layer proteins for the introduction of functional molecules. S-layer proteins are structure proteins that self-assemble into regular arrays on surfaces. One general feature of S-layer proteins is their high amount of carboxylic and amino groups. These groups are potential targets for linking functional molecules, thus producing reactive surfaces. In this work, these groups were conjugated with the amino acid tryptophan. In another approach, SH-groups were chemically inserted in order to extend the spectrum of modifiable groups. The amount of modifiable carboxylic groups was further evaluated by potentiometric titration in order to evaluate the potential efficiency of S-layer proteins to work as matrix for bioconjugations. The results proved that S-layer proteins can work as effective matrices for the conjugation of different molecules. The advantage of using chemical modification methods over genetic methods lies in its versatile usage enabling the attachment of biomolecules, as well as fluorescent dyes and inorganic molecules. Together with their self-assembling properties, S-layer proteins are suitable as targets for bioconjugates, thus enabling a nanostructuring and bio-functionalization of surfaces, which can be used for different applications like biosensors, filter materials, or (bio)catalytic surfaces
Hepcidin-25 in diabetic chronic kidney disease is predictive for mortality and progression to end stage renal disease
Background
Anemia is common and is associated with impaired clinical outcomes in diabetic chronic kidney disease (CKD). It may be explained by reduced erythropoietin (EPO) synthesis, but recent data suggest that EPO-resistance and diminished iron availability due to inflammation contribute significantly. In this cohort study, we evaluated the impact of hepcidin-25—the key hormone of iron-metabolism—on clinical outcomes in diabetic patients with CKD along with endogenous EPO levels.
Methods
249 diabetic patients with CKD of any stage, excluding end-stage renal disease (ESRD), were enrolled (2003–2005), if they were not on EPO-stimulating agent and iron therapy. Hepcidin-25 levels were measured by radioimmunoassay. The association of hepcidin-25 at baseline with clinical variables was investigated using linear regression models. All-cause mortality and a composite endpoint of CKD progression (ESRD or doubling of serum creatinine) were analyzed by Cox proportional hazards models.
Results
Patients (age 67 yrs, 53% male, GFR 51 ml/min, hemoglobin 131 g/L, EPO 13.5 U/L, hepcidin-25 62.0 ng/ml) were followed for a median time of 4.2 yrs. Forty-nine patients died (19.7%) and forty (16.1%) patients reached the composite endpoint. Elevated hepcidin levels were independently associated with higher ferritin-levels, lower EPO-levels and impaired kidney function (all p<0.05). Hepcidin was related to mortality, along with its interaction with EPO, older age, greater proteinuria and elevated CRP (all p<0.05). Hepcidin was also predictive for progression of CKD, aside from baseline GFR, proteinuria, low albumin- and hemoglobin-levels and a history of CVD (all p<0.05).
Conclusions
We found hepcidin-25 to be associated with EPO and impaired kidney function in diabetic CKD. Elevated hepcidin-25 and EPO-levels were independent predictors of mortality, while hepcidin-25 was also predictive for progression of CKD. Both hepcidin-25 and EPO may represent important prognostic factors of clinical outcome and have the potential to further define “high risk” populations in CKD