Partial loss compensation in dielectric-loaded plasmonic waveguides at near infra-red wavelengths

We report on the fabrication and characterization of straight dielectric-loaded surface plasmon polaritons waveguides doped with leadsulfide quantum dots as a near infra-red gain medium. A loss compensation of ~33% (an optical gain of ~143 cm−1 ) was observed in the guided mode. The mode propagation, coupling efficiency and stimulated emission were characterized using leakage radiation microscopy. The guided mode signature was separated using spatial filters in the Fourier plane of the microscope for quantitative measurements of stimulated emission

Boosting Local Field Enhancement by on-Chip Nanofocusing and Impedance-Matched Plasmonic Antennas

Strongly confined surface plasmon-polariton modes can be used for efficiently delivering the electromagnetic energy to nano-sized volumes by reducing the cross sections of propagating modes far beyond the diffraction limit, i.e., by nanofocusing. This process results in significant local-field enhancement that can advantageously be exploited in modern optical nanotechnologies, including signal processing, biochemical sensing, imaging and spectroscopy. Here, we propose, analyze, and experimentally demonstrate on-chip nanofocusing followed by impedance-matched nanowire antenna excitation in the end-fire geometry at telecom wavelengths. Numerical and experimental evidences of the efficient excitation of dipole and quadrupole (dark) antenna modes are provided, revealing underlying physical mechanisms and analogies with the operation of plane-wave Fabry-P\'erot interferometers. The unique combination of efficient nanofocusing and nanoantenna resonant excitation realized in our experiments offers a major boost to the field intensity enhancement up to $\sim 12000$, with the enhanced field being evenly distributed over the gap volume of $30\times 30\times 10\ {\rm nm}^3$, and promises thereby a variety of useful on-chip functionalities within sensing, nonlinear spectroscopy and signal processing

Efficient unidirectional nanoslit couplers for surface plasmons

Plasmonics is based on surface plasmon polariton (SPP) modes which can be laterally confined below the diffraction limit, thereby enabling ultracompact optical components. In order to exploit this potential, the fundamental bottleneck of poor light-SPP coupling must be overcome. In established SPP sources (using prism, grating} or nanodefect coupling) incident light is a source of noise for the SPP, unless the illumination occurs away from the region of interest, increasing the system size and weakening the SPP intensity. Back-side illumination of subwavelength apertures in optically thick metal films eliminates this problem but does not ensure a unique propagation direction for the SPP. We propose a novel back-side slit-illumination method based on drilling a periodic array of indentations at one side of the slit. We demonstrate that the SPP running in the array direction can be suppressed, and the one propagating in the opposite direction enhanced, providing localized unidirectional SPP launching.Comment: 13 pages, 4 figure

Graphene-protected copper and silver plasmonics

Plasmonics has established itself as a branch of physics which promises to revolutionize data processing, improve photovoltaics, increase sensitivity of bio-detection. A widespread use of plasmonic devices is notably hindered (in addition to high losses) by the absence of stable and inexpensive metal films suitable for plasmonic applications. This may seem surprising given the number of metal compounds to choose from. Unfortunately, most of them either exhibit a strong damping of surface plasmons or easily oxidize and corrode. To this end, there has been continuous search for alternative plasmonic materials that are, unlike gold, the current metal of choice in plasmonics, compatible with complementary metal oxide semiconductor technology. Here we show that copper and silver protected by graphene are viable candidates. Copper films covered with one to a few graphene layers show excellent plasmonics characteristics surpassing those of gold films. They can be used to fabricate plasmonic devices and survive for at least a year, even in wet and corroding conditions. As a proof of concept, we use the graphene-protected copper to demonstrate dielectric loaded plasmonic waveguides and test sensitivity of surface plasmon resonances. Our results are likely to initiate a wide use of graphene-protected plasmonics.Comment: 22 pages, 5 figure

Gene-centric coverage of the human liver transcriptome: QPCR, Illumina, and Oxford Nanopore RNA-Seq

It has been shown that the best coverage of the HepG2 cell line transcriptome encoded by genes of a single chromosome, chromosome 18, is achieved by a combination of two sequencing platforms, Illumina RNA-Seq and Oxford Nanopore Technologies (ONT), using cut-off levels of FPKM > 0 and TPM > 0, respectively. In this study, we investigated the extent to which the combination of these transcriptomic analysis methods makes it possible to achieve a high coverage of the transcriptome encoded by the genes of other human chromosomes. A comparative analysis of transcriptome coverage for various types of biological material was carried out, and the HepG2 cell line transcriptome was compared with the transcriptome of liver tissue cells. In addition, the contribution of variability in the coverage of expressed genes in human transcriptomes to the creation of a draft human transcriptome was evaluated. For human liver tissues, ONT makes an extremely insignificant contribution to the overall coverage of the transcriptome. Thus, to ensure maximum coverage of the liver tissue transcriptome, it is sufficient to apply only one technology: Illumina RNA-Seq (FPKM > 0)

Efficient Excitation of Channel Plasmons in Tailored, UV-Lithography-Defined V-Grooves

[Image: see text] We demonstrate the highly efficient (>50%) conversion of freely propagating light to channel plasmon-polaritons (CPPs) in gold V-groove waveguides using compact 1.6 μm long waveguide-termination coupling mirrors. Our straightforward fabrication process, involving UV-lithography and crystallographic silicon etching, forms the coupling mirrors innately and ensures exceptional-quality, wafer-scale device production. We tailor the V-shaped profiles by thermal silicon oxidation in order to shift initially wedge-located modes downward into the V-grooves, resulting in well-confined CPPs suitable for nanophotonic applications

Modulation of surface plasmon coupling-in by one-dimensional surface corrugation

Surface plasmon-polaritons have recently attracted renewed interest in the scientific community for their potential in sub-wavelength optics, light generation and non-destructive sensing. Given that they cannot be directly excited by freely propagating light due to their intrinsical binding to the metal surface, the light-plasmon coupling efficiency becomes of crucial importance for the success of any plasmonic device. Here we present a comprehensive study on the modulation (enhancement or suppression) of such coupling efficiency by means of one-dimensional surface corrugation. Our approach is based on simple wave interference and enables us to make quantitative predictions which have been experimentally confirmed at both the near infra-red and telecom ranges.Comment: 20 pages, 13 figures, submitted to New Journal of Physics, revised tex