Effect of Vitamin E, Lutein, Selenium and Oil Mixture Added to Feed and Cooking Length on Yolk Color and Egg Quality

The aim of this research was to determine the quality of eggs laid by Tetra SL hens fed standard diet (B) or diet supplemented with 100 mg vitamin E/kg+200 mg/kg lutein+0.5 mg/kg selenium+5% oil mixture (BK). The effect of treatment was determined for yolk color values (P0.05). However, the treatment had statistically significant effect (P0.05)

Increase of the Lutein Content in Hens' Eggs

Lutein is a plant pigment that belongs to the xantophyll group of carotenoids. In nature it is widespread (prevalent) in green leafy vegetables (spinach, kale, collard greens, lettuce) but also in peppers, tangerines, corn and egg yolk. Since it cannot be synthesized in the body it has to be taken with food. In human body lutein is concentrated in the retina and macula lutea and its content in those tissues rises with increased intake through food or supplements. It has antioxidant activity, protects eyes from high-energy blue light and helps in reducing the risk of developing age-related macular degeneration and cataracts. Until now, lutein was used in poultry industry mostly for pigmenting broiler's meat and skin and egg yolk and lately there have been more studies whose goal is to increase lutein content in yolk and production of enriched, functional food. Although table egg is not the best source of lutein, studies have shown that its bioavailability in human body is higher from lipid matrix of yolk compared with lutein from vegetable sources or food supplements. The egg is highly nutritious food because it contains high-quality proteins with balanced amino acid composition, essential fatty acids, minerals and vitamins necessary for proper functioning of the body and with increased content of lutein it becomes a value-added product. Addition of natural or synthetic sources of lutein in mixtures for laying hens enables the transfer of lutein through hen's metabolism into egg yolk. The increase of lutein content in yolk is noticeable already after one week of feeding the hens with modified mixtures although it takes a longer time for its content to be stabilized. Egg with increased content of lutein in yolk represents quality and accessible source of lutein in human nutrition. Consumption of enriched eggs contributes to increased intake of lutein as well as its accumulation in the human organism

QHREDGS Enhances Tube Formation, Metabolism and Survival of Endothelial Cells in Collagen-Chitosan Hydrogels

Cell survival in complex, vascularized tissues, has been implicated as a major bottleneck in advancement of therapies based on cardiac tissue engineering. This limitation motivates the search for small, inexpensive molecules that would simultaneously be cardio-protective and vasculogenic. Here, we present peptide sequence QHREDGS, based upon the fibrinogen-like domain of angiopoietin-1, as a prime candidate molecule. We demonstrated previously that QHREDGS improved cardiomyocyte metabolism and mitigated serum starved apoptosis. In this paper we further demonstrate the potency of QHREDGS in its ability to enhance endothelial cell survival, metabolism and tube formation. When endothelial cells were exposed to the soluble form of QHREDGS, improvements in endothelial cell barrier functionality, nitric oxide production and cell metabolism (ATP levels) in serum starved conditions were found. The functionality of the peptide was then examined when conjugated to collagen-chitosan hydrogel, a potential carrier for in vivo application. The presence of the peptide in the hydrogel mitigated paclitaxel induced apoptosis of endothelial cells in a dose dependent manner. Furthermore, the peptide modified hydrogels stimulated tube-like structure formation of encapsulated endothelial cells. When integrin αvβ3 or α5β1were antibody blocked during cell encapsulation in peptide modified hydrogels, tube formation was abolished. Therefore, the dual protective nature of the novel peptide QHREDGS may position this peptide as an appealing augmentation for collagen-chitosan hydrogels that could be used for biomaterial delivered cell therapies in the settings of myocardial infarction

What does the general public understand about prevention and treatment of dementia? A systematic review of population-based surveys

Objectives: To synthesise results of population surveys assessing knowledge and attitudes about prevention and treatment of dementia. Methods: MEDLINE, EMBASE, PsycINFO, and grey literature were searched for English language entries published between 2012 and May 2017. Survey questions were grouped using an inductive approach and responses were pooled. Results: Thirty-four eligible studies and four grey literature items were identified. Surveys were conducted in Europe, the US, Eastern Asia, Israel, and Australia. Nearly half of respondents agreed that dementia is a normal and non-preventable part of ageing, but belief in the potential for prevention may be improving over time. The role of cardiovascular risk factors was poorly understood overall. Less than half of respondents reported belief in the availability of a cure for dementia. The value of seeking treatment was highly endorsed. Conclusions: Results suggest that knowledge about the potential for dementia prevention and treatment remains poor but may be improving over time. Knowledge among those living in low- and middle-income countries are largely unknown, presenting challenges for the development of National action plans consistent with World Health Organization directives.Monica Cations, Gorjana Radisic, Maria Crotty, Kate E. Lave

Band-stop filter with suppression of requested number of spurious stopbands

Design method for band-stop filters (BSFs) that suppress a requested number of spurious bandstops and reduce ripples in the passbands below similar to 1 dB is proposed. BSF is designed in a form of a cascade of cells, each consisting of steps of equal electrical length, where the number of steps is used to control the number of suppressed spurious bandstops. Analytical formulas are developed that enable initial design of BSF for a given central frequency, depth, and bandwidth of the stopband. Varying the minimum characteristic impedances of initial cells, through an optimization using circuit simulation, the ripples in passbands are reduced below similar to 1 dB. Using the proposed theory, three filters in microstrip technology, with suppression of 3, 5, and 7 spurious stopbands respectively, were designed, fabricated, and measured. Good agreement between simulated and measured results has been observed. The proposed design can be recommended for filters having broad stop bandwidths, between 40 and 100%

Waveguide Transition for Submillimeter-Wave MMICs

An integrated waveguide-to-MMIC (monolithic microwave integrated circuit) chip operating in the 300-GHz range is designed to operate well on high-permittivity semiconductor substrates typical for an MMIC amplifier, and allows a wider MMIC substrate to be used, enabling integration with larger MMICs (power amplifiers). The waveguide-to- CBCPW (conductor-backed coplanar waveguide) transition topology is based on an integrated dipole placed in the E-plane of the waveguide module. It demonstrates low loss and good impedance matching. Measurement and simulation demonstrate that the loss of the transition and waveguide loss is less than 1-dB over a 340-to-380-GHz bandwidth. A transition is inserted along the propagation direction of the waveguide. This transition uses a planar dipole aligned with the maximum E-field of the TE10 waveguide mode as an inter face between the waveguide and the MMIC. Mode conversion between the coplanar striplines (CPS) that feed the dipole and the CBCPW transmission line is accomplished using a simple air-bridge structure. The bottom side ground plane is truncated at the same reference as the top-side ground plane, leaving the end of the MMIC suspended in air

Costs and economic evaluations of Quality Improvement Collaboratives in healthcare: a systematic review

BACKGROUND:In increasingly constrained healthcare budgets worldwide, efforts to improve quality and reduce costs are vital. Quality Improvement Collaboratives (QICs) are often used in healthcare settings to implement proven clinical interventions within local and national programs. The cost of this method of implementation, however, is cited as a barrier to use. This systematic review aims to identify and describe studies reporting on costs and cost-effectiveness of QICs when used to implement clinical guidelines in healthcare. METHODS:Multiple databases (CINAHL, MEDLINE, PsycINFO, EMBASE, EconLit and ProQuest) were searched for economic evaluations or cost studies of QICs in healthcare. Studies were included if they reported on economic evaluations or costs of QICs. Two authors independently reviewed citations and full text papers. Key characteristics of eligible studies were extracted, and their quality assessed against the Consolidated Health Economic Evaluation Reporting Standards (CHEERS). Evers CHEC-List was used for full economic evaluations. Cost-effectiveness findings were interpreted through the Johanna Briggs Institute 'three by three dominance matrix tool' to guide conclusions. Currencies were converted to United States dollars for 2018 using OECD and World Bank databases. RESULTS:Few studies reported on costs or economic evaluations of QICs despite their use in healthcare. Eight studies across multiple healthcare settings in acute and long-term care, community addiction treatment and chronic disease management were included. Five were considered good quality and favoured the establishment of QICs as cost-effective implementation methods. The cost savings to the healthcare setting identified in these studies outweighed the cost of the collaborative itself. CONCLUSIONS:Potential cost savings to the health care system in both acute and chronic conditions may be possible by applying QICs at scale. However, variations in effectiveness, costs and elements of the method within studies, indicated that caution is needed. Consistent identification of costs and description of the elements applied in QICs would better inform decisions for their use and may reduce perceived barriers. Lack of studies with negative findings may have been due to publication bias. Future research should include economic evaluations with societal perspectives of costs and savings and the cost-effectiveness of elements of QICs. TRIAL REGISTRATION:PROSPERO registration number: CRD42018107417.Lenore de la Perrelle, Gorjana Radisic, Monica Cations, Billingsley Kaambwa, Gaery Barbery and Kate Lave

High performance MMICs with submillimeter wave InP-based HEMTs

This paper presents some recently developed MMICs based on a 0.1-/spl mu/m gate-length InAlAs/InGaAs/InP HEMT process with an f/sub max/ above 600 GHz. InP-based HEMTs provide more power gain and lower noise at higher frequencies than any other transistor, including GaAs-based pHEMTs. A number of state-of-the-art InP HEMT MMICs will be presented. This includes a 150-205 GHz amplifier with 15 dB of gain, a broadband 60-140 GHz amplifier with 25 mW output power at 140 GHz, a high gain Ka-band LNA and static frequency-divider circuits operating at clock rates above 45 GHz. The high frequency performance of a next-generation 0.08-/spl mu/m-gate InAlAsSb/InAlAs/InGaAs/InP HEMT technology will also be presented