45 research outputs found
RAVEN: a GUI and an Artificial Intelligence Engine in a Dynamic PRA Framework
Increases in computational power and pressure for
more accurate simulations and estimations of accident scenario consequences are driving the need for Dynamic
Probabilistic Risk Assessment (PRA) [1] of very complex models. While more sophisticated algorithms and
computational power address the back end of this challenge, the front end is still handled by engineers that
need to extract meaningful information from the large amount of data and build these complex models.
Compounding this problem is the difficulty in knowledge transfer and retention, and the increasing speed of
software development. The above-described issues would have negatively
impacted deployment of the new high fidelity plant simulator RELAP-7 (Reactor Excursion and Leak
Analysis Program) at Idaho National Laboratory. Therefore, RAVEN that was initially focused to be the
plant controller for RELAP-7 will help mitigate future
RELAP-7 software engineering risks. In order to accomplish such a task Reactor Analysis
and V
Hot Zero and Full Power Validation of PHISICS RELAP-5 Coupling
PHISICS is a reactor analysis toolkit developed over
the last 3 years at the Idaho National Laboratory. It has
been coupled with the reactor safety analysis code
RELAP5-3D. PHISICS is aimed at providing an optimal
trade off between needed computational resources (in the
range of 10~100 computer processors) and accuracy. In
fact, this range has been identified as the next 5 to 10
years average computational capability available to
nuclear reactor design and optimization nuclear reactor
cores.
Detailed information about the individual modules of
PHISICS can be found in [1]. An overview of the
modules used in this study is given in the next subsection.
Lately, the Idaho National Laboratory gained access plant
data for the first cycle of a PWR, including Hot Zero
Power (HZP) and Hot Full Power (HFP).
This data provides the opportunity to validate the
transport solver, the interpolation capability for mixed
macro and micro cross section and the criticality search
option of the PHISICS pack
Dynamic PRA: an Overview of New Algorithms to Generate, Analyze and Visualize Data
State of the art PRA methods, i.e. Dynamic PRA
(DPRA) methodologies, largely employ system
simulator codes to accurately model system dynamics.
Typically, these system simulator codes (e.g., RELAP5 )
are coupled with other codes (e.g., ADAPT,
RAVEN that monitor and control the simulation. The
latter codes, in particular, introduce both deterministic
(e.g., system control logic, operating procedures) and
stochastic (e.g., component failures, variable uncertainties)
elements into the simulation. A typical DPRA analysis is
performed by:
1. Sampling values of a set of parameters from the
uncertainty space of interest
2. Simulating the system behavior for that specific set of
parameter values
3. Analyzing the set of simulation runs
4. Visualizing the correlations between parameter values
and simulation outcome
Step 1 is typically performed by randomly sampling
from a given distribution (i.e., Monte-Carlo) or selecting
such parameter values as inputs from the user (i.e.,
Dynamic Event Tre
Recommended from our members
Interim Report on Fuel Cycle Neutronics Code Development.
As part of the Global Nuclear Energy Partnership (GNEP), a fast reactor simulation program was launched in April 2007 to develop a suite of modern simulation tools specifically for the analysis and design of sodium cooled fast reactors. The general goal of the new suite of codes is to reduce the uncertainties and biases in the various areas of reactor design activities by enhanced prediction capabilities. Under this fast reactor simulation program, a high-fidelity deterministic neutron transport code named UNIC is being developed. The final objective is to produce an integrated, advanced neutronics code that allows the high fidelity description of a nuclear reactor and simplifies the multi-step design process by direct coupling with thermal-hydraulics and structural mechanics calculations. Currently there are three solvers for the neutron transport code incorporated in UNIC: PN2ND, SN2ND, and MOCFE. PN2ND is based on a second-order even-parity spherical harmonics discretization of the transport equation and its primary target area of use is the existing homogenization approaches that are prevalent in reactor physics. MOCFE is based upon the method of characteristics applied to an unstructured finite element mesh and its primary target area of use is the fine grained nature of the explicit geometrical problems which is the long term goal of this project. SN2ND is based on a second-order, even-parity discrete ordinates discretization of the transport equation and its primary target area is the modeling transition region between the PN2ND and MOCFE solvers. The major development goal in fiscal year 2008 for the MOCFE solver was to include a two-dimensional capability that is scalable to hundreds of processors. The short term goal of this solver is to solve two-dimensional representations of reactor systems such that the energy and spatial self-shielding are accounted for and reliable cross sections can be generated for the homogeneous calculations. In this report we present good results for an OECD benchmark obtained using the new two-dimensional capability of the MOCFE solver. Additional work on the MOCFE solver is focused on studying the current parallelization algorithms that can be applied to both the two- and three-dimensional implementations such that they are scalable to thousands of processors. The initial research into this topic indicates that, as expected, the current parallelization scheme is not sufficiently scalable for the detailed reactor geometry that it is intended for. As a consequence, we are starting the investigative research to determine the alternatives that are applicable for massively parallel machines. The major development goal in fiscal year 2008 for the PN2ND and SN2ND solvers was to introduce parallelism by angle and energy. The motivation for this is two-fold: (1) reduce the memory burden by picking a simpler preconditioner with reduced matrix storage and (2) improve parallel performance by solving the angular subsystems of the within group equation simultaneously. The solver development in FY2007 focused on using PETSc to solve the within group equation where only spatial parallelization was utilized. Because most homogeneous problems required relatively few spatial degrees of freedom (tens of thousands) the only way to improve the parallelism was to spread the angular moment subsystems across the parallel system. While the coding has been put into place for parallelization by space, angle, and group, we have not optimized any of the solvers and therefore do not give an assessment of the achievement of this work in this report. The immediate task to be completed is to implement and validate Tchebychev acceleration of the fission source iteration algorithm (inverse power method in this work) and optimize both the PN2ND and SN2ND solvers. We further intend to extend the applicability of the UNIC code by adding a first-order discrete ordinates solver termed SN1ST. Upon completion of this work, all memory usage problems are to be identified and studied in the solvers with the intent of making the new version of an exportable production code in either FY2008 or FY2009. This report covers the status of these tasks and discusses the work yet to be completed
Recommended from our members
Monte Carlo Modeling and Analyses of Yalina- Booster Subcritical Assembly Part II : Pulsed Neutron Source.
One of the most reliable experimental methods for measuring the kinetic parameters of a subcritical assembly is the Sjoestrand method applied to the reaction rate generated from a pulsed neutron source. This study developed a new analytical methodology for characterizing the kinetic parameters of a subcritical assembly using the Sjoestrand method, which allows comparing the analytical and experimental time dependent reaction rates and the reactivity measurements. In this methodology, the reaction rate, detector response, is calculated due to a single neutron pulse using MCNP/MCNPX computer code or any other neutron transport code that explicitly simulates the fission delayed neutrons. The calculation simulates a single neutron pulse over a long time period until the delayed neutron contribution to the reaction is vanished. The obtained reaction rate is superimposed to itself, with respect to the time, to simulate the repeated pulse operation until the asymptotic level of the reaction rate, set by the delayed neutrons, is achieved. The superimposition of the pulse to itself was calculated by a simple C computer program. A parallel version of the C program is used due to the large amount of data being processed, e.g. by the Message Passing Interface (MPI). The new calculation methodology has shown an excellent agreement with the experimental results available from the YALINA-Booster facility of Belarus. The facility has been driven by a Deuterium-Deuterium or Deuterium-Tritium pulsed neutron source and the (n,p) reaction rate has been experimentally measured by a {sup 3}He detector. The MCNP calculation has utilized the weight window and delayed neutron biasing variance reduction techniques since the detector volume is small compared to the assembly volume. Finally, this methodology was used to calculate the IAEA benchmark of the YALINA-Booster experiment
Recommended from our members
Status report on SHARP coupling framework.
This report presents the software engineering effort under way at ANL towards a comprehensive integrated computational framework (SHARP) for high fidelity simulations of sodium cooled fast reactors. The primary objective of this framework is to provide accurate and flexible analysis tools to nuclear reactor designers by simulating multiphysics phenomena happening in complex reactor geometries. Ideally, the coupling among different physics modules (such as neutronics, thermal-hydraulics, and structural mechanics) needs to be tight to preserve the accuracy achieved in each module. However, fast reactor cores in steady state mode represent a special case where weak coupling between neutronics and thermal-hydraulics is usually adequate. Our framework design allows for both options. Another requirement for SHARP framework has been to implement various coupling algorithms that are parallel and scalable to large scale since nuclear reactor core simulations are among the most memory and computationally intensive, requiring the use of leadership-class petascale platforms. This report details our progress toward achieving these goals. Specifically, we demonstrate coupling independently developed parallel codes in a manner that does not compromise performance or portability, while minimizing the impact on individual developers. This year, our focus has been on developing a lightweight and loosely coupled framework targeted at UNIC (our neutronics code) and Nek (our thermal hydraulics code). However, the framework design is not limited to just using these two codes
Recommended from our members
Status report on high fidelity reactor simulation.
This report presents the effort under way at Argonne National Laboratory toward a comprehensive, integrated computational tool intended mainly for the high-fidelity simulation of sodium-cooled fast reactors. The main activities carried out involved neutronics, thermal hydraulics, coupling strategies, software architecture, and high-performance computing. A new neutronics code, UNIC, is being developed. The first phase involves the application of a spherical harmonics method to a general, unstructured three-dimensional mesh. The method also has been interfaced with a method of characteristics. The spherical harmonics equations were implemented in a stand-alone code that was then used to solve several benchmark problems. For thermal hydraulics, a computational fluid dynamics code called Nek5000, developed in the Mathematics and Computer Science Division for coupled hydrodynamics and heat transfer, has been applied to a single-pin, periodic cell in the wire-wrap geometry typical of advanced burner reactors. Numerical strategies for multiphysics coupling have been considered and higher-accuracy efficient methods proposed to finely simulate coupled neutronic/thermal-hydraulic reactor transients. Initial steps have been taken in order to couple UNIC and Nek5000, and simplified problems have been defined and solved for testing. Furthermore, we have begun developing a lightweight computational framework, based in part on carefully selected open source tools, to nonobtrusively and efficiently integrate the individual physics modules into a unified simulation tool