Durable self-cleaning coatings for architectural surfaces by incorporation of TiO2 nano-particles into hydroxyapatite films

To prevent soiling of marble exposed outdoors, the use of TiO2 nano-particles has been proposed in the literature by two main routes, both raising durability issues: (i) direct application to marble surface, with the risk of particle leaching by rainfall; (ii) particle incorporation into inorganic or organic coatings, with the risk of organic coating degradation catalyzed by TiO2 photoactivity. Here, we investigated the combination of nano-TiO2 and hydroxyapatite (HAP), previously developed for marble protection against dissolution in rain and mechanical consolidation. HAP-TiO2 combination was investigated by two routes: (i) in series application of HAP followed by nano-TiO2 (“H+T”); (ii) simultaneous application by introducing nano-TiO2 into the phosphate solution used to form HAP (“HT”). The self-cleaning ability was evaluated before and after prolonged exposure to simulated rain. “H+T” and “HT” coatings exhibited much better resistance to nano-TiO2 leaching by rain, compared to TiO2 alone. In “H+T” samples, TiO2 nano-particles adhere better to HAP (having flower-like morphology and high specific surface area) than to marble. In “HT” samples, thanks to chemical bonds between nano-TiO2 and HAP, the particles are firmly incorporated in the HAP coating, which protects them from leaching by rain, without diminishing their photoactivity and without being degraded by them

Electrospun Nanostructured Fibers of Collagen-Biomimetic Apatite on Titanium Alloy

Titanium and its alloys are currently the mainly used materials to manufacture orthopaedic implants due to their excellent mechanical properties and corrosion resistance. Although these materials are bioinert, the improvement of biological properties (e.g., bone implant contact) can be obtained by the application of a material that mimics the bone extracellular matrix. To this aim, this work describes a new method to produce nanostructured collagen-apatite composites on titanium alloy substrate, by combining electrospinning and biomimetic mineralization. The characterization results showed that the obtained mineralized scaffolds have morphological, structural, and chemical compositional features similar to natural bone extracellular matrix. Finally, the topographic distribution of the chemical composition in the mineralized matrix evaluated by Fourier Transform Infrared microspectroscopy demonstrated that the apatite nanocrystals cover the collagen fibers assembled by the electrospinning

New thiophene monolayer-protected copper nanoparticles: synthesis and chemical-physical characterization

For the first time copper 3-(6-mercaptohexyl)thiophene-protected nanoparticles (Cu T6SH) have been synthesized by a one-phase system, utilizing anNaBH4/LiCl mixture in diglyme as the reducing reagent and avoiding water medium dissolving copper salts. The prepared nanoclusters, characterized by transmission electron microscopy (TEM), have shown a constant spherical morphology with a size dimension of 5-6 nm in diameter. After their synthesis, no morphological evolution and irreversible aggregation process has been observed after a storage inCH2Cl2at low temperature for a period up to six months long. Cu T6SH nanoparticles have been investigated by UV-Visible (UV-Vis) and Fourier transmission infrared (FTIR) spectroscopes to characterize the alkylthiophenes monolayer conformations and the particles optoelectronic properties. The UV-Vis reveals the lack of the surface plasmonic band, previously observed in Cu-nanosized clusters at about 556–570 nm, and shows a wide-band centered at 293 nm, probably due to the high-conformational surface ordering of thiophene rings on the Cu core. The results highlight the importance of the modifications ported to the well-known one-phase synthetic reactions to obtain a clear lack, even after a storage of six months, of any irreversible aggregation that has always characterized chain thiophene-protected metallic nanoparticles

Biomimetic hydroxyapatite nanocrystals are an active carrier for Salmonella bacteriophages

open access articlePurpose: The use of bacteriophages represents a valid alternative to conventional antimicrobial treatments, overcoming the widespread bacterial antibiotic resistance phenomenon. In this work, we evaluated whether biomimetic hydroxyapatite (HA) nanocrystals are able to enhance some properties of bacteriophages. The final goal of this study was to demonstrate that biomimetic HA nanocrystals can be used for bacteriophage delivery in the context of bacterial infections, and contribute – at the same time – to enhance some of the biological properties of the same bacteriophages such as stability, preservation, antimicrobial activity, and so on. Materials and methods: Phage isolation and characterization were carried out by using Mitomycin C and following double-layer agar technique. The biomimetic HA water suspension was synthesized in order to obtain nanocrystals with plate-like morphology and nanometric dimensions. The interaction of phages with the HA was investigated by dynamic light scattering and Zeta potential analyses. The cytotoxicity and intracellular killing activities of the phage–HA complex were evaluated in human hepatocellular carcinoma HepG2 cells. The bacterial inhibition capacity of the complex was assessed on chicken minced meat samples infected with Salmonella Rissen. Results: Our data highlighted that the biomimetic HA nanocrystal–bacteriophage complex was more stable and more effective than phages alone in all tested experimental conditions. Conclusion: Our results evidenced the important contribution of biomimetic HA nanocrystals: they act as an excellent carrier for bacteriophage delivery and enhance its biological characteristics. This study confirmed the significant role of the mineral HA when it is complexed with biological entities like bacteriophages, as it has been shown for molecules such as lactoferrin

Hydroxyapatite nanocrystals as a smart, pH sensitive, delivery system for kiteplatin

Hydroxyapatite (HA) nanocrystals are important inorganic constituents of biological hard tissues in vertebrates and have been proposed as a bone substitute or a coating material for prostheses in biomedicine. Hydroxyapatite is also amenable for its capacity to bind to a great variety of biomolecules and therapeutic agents. As drug carriers, apatite nanoparticles also have the advantage of pH dependent solubility and low toxicity. Thus HA nanoparticles are negligibly soluble at physiological pH but their dissolution is accelerated at lower pH such as that typically found in the vicinity of tumors. In the present study we have investigated the adsorption on and the release from biomimetic HA nanoparticles of two platinum derivatives of cis-1,4-diaminocyclohexane ([PtX2(cis-1,4-DACH)], X2 = Cl2 (1) and 1,1-cyclobutanedicarboxylate (CBDCA, 2)). The first of the two compounds proved to be active against colon cancer cells also resistant to oxaliplatin. The release has been investigated as a function of pH to mimic the different physiological environments of healthy tissues and tumors, and the in vitro cytotoxicity of the releasates from the HA matrices has been assessed against various human cancer cell lines. The results fully confirmed the potential of 1-loaded HA nanoparticles as bone-specific drug delivery devices

Surface enamel remineralization: biomimetic apatite nanocrystals and fluoride ions different effects

A new method for altered enamel surface remineralization has been proposed. To this aim carbonate-hydroxyapatite nanocrystals which mimic for composition, structure, nanodimensions, and morphology dentine apatite crystals and resemble closely natural apatite chemical-physical properties have been used. The results underline the differences induced by the use of fluoride ions and hydroxyapatite nanocrystals in contrasting the mechanical abrasions and acid attacks to which tooth enamel is exposed. Fluoride ions generate a surface modification of the natural enamel apatite crystals increasing their crystallinity degree and relative mechanical and acid resistance. On the other hand, the remineralization produced by carbonate-hydroxyapatite consists in a deposition of a new apatitic mineral into the eroded enamel surface scratches. A new biomimetic mineral coating, which progressively fills and shadows surface scratches, covers and safeguards the enamel structure by contrasting the acid and bacteria attacks

Evolving application of biomimetic nanostructured hydroxyapatite

By mimicking Nature, we can design and synthesize inorganic smart materials that are reactive to biological tissues. These smart materials can be utilized to design innovative third-generation biomaterials, which are able to not only optimize their interaction with biological tissues and environment, but also mimic biogenic materials in their functionalities. The biomedical applications involve increasing the biomimetic levels from chemical composition, structural organization, morphology, mechanical behavior, nanostructure, and bulk and surface chemical–physical properties until the surface becomes bioreactive and stimulates cellular materials. The chemical–physical characteristics of biogenic hydroxyapatites from bone and tooth have been described, in order to point out the elective sides, which are important to reproduce the design of a new biomimetic synthetic hydroxyapatite. This review outlines the evolving applications of biomimetic synthetic calcium phosphates, details the main characteristics of bone and tooth, where the calcium phosphates are present, and discusses the chemical–physical characteristics of biomimetic calcium phosphates, methods of synthesizing them, and some of their biomedical applications

Evolving application of biomimetic nanostructured hydroxyapatite

Norberto Roveri, Michele IafiscoLaboratory of Environmental and Biological Structural Chemistry (LEBSC), Dipartimento di Chimica ‘G. Ciamician’, Alma Mater Studiorum, Università di Bologna, Bologna, ItalyAbstract: By mimicking Nature, we can design and synthesize inorganic smart materials that are reactive to biological tissues. These smart materials can be utilized to design innovative third-generation biomaterials, which are able to not only optimize their interaction with biological tissues and environment, but also mimic biogenic materials in their functionalities. The biomedical applications involve increasing the biomimetic levels from chemical composition, structural organization, morphology, mechanical behavior, nanostructure, and bulk and surface chemical–physical properties until the surface becomes bioreactive and stimulates cellular materials. The chemical–physical characteristics of biogenic hydroxyapatites from bone and tooth have been described, in order to point out the elective sides, which are important to reproduce the design of a new biomimetic synthetic hydroxyapatite. This review outlines the evolving applications of biomimetic synthetic calcium phosphates, details the main characteristics of bone and tooth, where the calcium phosphates are present, and discusses the chemical–physical characteristics of biomimetic calcium phosphates, methods of synthesizing them, and some of their biomedical applications.Keywords: hydroxyapatite, nanocrystals, biomimetism, biomaterials, drug delivery, remineralizatio