788 research outputs found
Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection
The area of micro-abrasion is an interesting and relatively recent area in tribo-testing methodologies, where small particles of less than 10 μm are employed between interacting surfaces. It is topical for a number of reasons; its direct relation to the mechanisms of the wear process in bio-tribological applications, ease in conducting tests and the good repeatability of the test results. It has widespread applications in conditions used in the space and offshore industries to bio-engineering for artificial joints and implants. There have been many recent studies on the micro-abrasion performance of materials, ranging from work basic metals to nano-structured coatings. However, no significant work is reported on the micro-abrasion resistance of thermochemically treated steels. Hence, this paper looks at the performance of two thermochemically treated steels, Tenifer bath nitride stainless steel (T-SS) and vanadized carbon steel (V-CS) in such conditions with reference to the stainless steel (SS) by varying the applied load and sliding distance. The results indicated that T-SS demonstrates exceptionally poor resistance to micro-abrasion. It was observed that the heat treatment process and properties of the hardened layer (hardness and thickness) are extremely important in determining the micro-abrasion resistance of such steels. Finally, the results were used to develop micro-abrasion mechanism and wastage maps, which can be used to optimize the surface treated materials for micro-abrasion resistance
Tribo-Corrosion behaviour of TiCxOy thin films in bio fluids
In recent years, the development of thin film systems for decorative applications has attracted significant attention in scientific research. These decorative coatings require, not only an attractive appearance for market applications, but also an ability to protect the surface underneath. Because of this, corrosion, wear and their combined effects (termed tribo-corrosion) are particularly important for lifetime prediction. The tribo-corrosion behaviour of a range of single layered titanium oxycarbide, TiCxOy,coatings, produced by DC reactive magnetron sputtering, has been studied and reported as a function of electrode potential (-0.9 V, -0.5 V, 0.0 V and +0.5 V) and applied load (3, 6 and 9 N). The study was conducted in a reciprocating sliding tribosystem (Plint TE 67/E) in a bio fluid (an artificial perspiration solution) at room temperature. During the wear tests, both the open-circuit potential and the corrosion current were monitored. The results showed that electrode potential and load have a significant influence on the total material loss. The variations in Rp (polarization resistance) and Cf(capacitance) before and after sliding, obtained by Electrochemical Impedance Spectroscopy (EIS) were evaluated in order to provide an understanding of the resistance of the film in such conditions. Tribo-corrosion maps were generated, based on the results, indicating the change in mechanisms of the tribological and corrosion parameters for such coatings
Identification of insulin in the tear film and insulin receptor and IGF-I receptor on the human ocular surface
FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORCNPQ – CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOInsulin produces pleiotropic effects on sensitive tissues. including the ocular surface, through the tyrosine kinase insulin receptor. Cerebrospinal fluid and secreted fluids, such as milk and saliva, have been reported to contain insulin. In the present study, the presence of insulin was examined in tear film, and the expression of insulin and insulin-like growth factor (IGF)-1 receptor was examined in the human cornea and conjunctiva. METHODS. Stimulated tear samples collected from 33 volunteers (17 men, 16 women), aged 23 to 51 years, who were fed or fasted for 12 hours, were assayed for total protein and insulin content by the biuret dye test and a radioimmunoassay, respectively. Frozen sections of human cornea (n = 4) and conjunctiva (n = 3) were incubated with anti-insulin receptor and anti-IGF-1 receptor antibodies and developed with a secondary antibody-peroxidase conjugate. RESULTS. Insulin was detected in all tear samples analyzed, the mean concentration being 0.404 +/- 0.129 ng/mL. There were no gender-related differences. In fed subjects, tears tended toward a higher insulin content than those in fasted individuals. There was no linear correlation between insulin and total protein content (mean, 4.61 +/- 0.79 mg/mL) in the tear film. Insulin and IGF-1 receptors were detected in the plasma membrane and cytoplasm of corneal and conjunctival epithelial cells. CONCLUSIONS. To the best of the authors' knowledge, this Study represents the first demonstration of insulin in human tear film and the presence of insulin and IGF-1 receptor on the human ocular surface. These results suggest that the pancreatic hormone may play a metabolic and/or mitogenic role on the ocular surfaceO TEXTO COMPLETO DESTE ARTIGO, ESTARÁ DISPONÍVEL À PARTIR DE FEVEREIRO DE 2015.434963967FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORCNPQ – CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCAPES - COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL E NÍVEL SUPERIORCNPQ – CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOsem informaçãosem informaçãosem informaçã
Silicone resin to improve corrosion resistance of Zn and ZnFe coated steel
Chromatation pre-treatments have been widely used to improve galvanized steel corrosion resistance. However, due to the high toxicity of chromate ions, chromatation pre-treatments tend to be banned and, in last years, alternative coating systems are under investigation. Recently, polysiloxanes have been developed for application as coatings. Among them, and due to their specific properties, such as hardness, chemical resistance and hydrophobicity, silicone resins may be considered as promising substitutes for chromatation pre-treatments. In this work silicone films, obtained from the hydrolysis of a methoxy functional silicone reactive intermediate, were applied on galvanized steel and on steel electroplated with a ZnFe alloy. Electrochemical techniques were used to characterize the degradation behavior of the samples. These consisted on the monitoring of the open circuit potential (OCP), and on the potentiodynamic polarization of the samples, which was performed in a 3% NaCl aqueous solution. Additionally, electrochemical impedance spectroscopy (EIS) was used as a complementary technique for the evaluation of the corrosion mechanisms of the coating system. SEM and EDS were employed to inspect the surface of the samples before and after the electrochemical tests. EIS data was fitted to an equivalent circuit from which the electrochemical parameters were obtained. Results show the protective character of the resin films, when compared with uncovered specimens. The capacitance of the films increased with the immersion time, in accordance to the behavior expected for an organic film. The overall performance of the coating systems appears to be highly dependent on the type of metallic coating applied to the steel. During the first three days of immersion the coatings applied upon galvanized steel showed larger |Z| values when compared with those applied to the electroplated steel, indicating a superior corrosion resistance of the former. However, after that time, an abrupt drop of |Z| is observed in the film applied on galvanized steel. In comparison, the coating system involving ZnFe alloy evidences a better stability throughout the immersion time.1623Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES
Some thoughts on neural network modelling of micro-abrasion-corrosion processes
There is increasing interest in the interactions of microabrasion, involving small particles of less than 10 μm in size, with corrosion. This is because such interactions occur in many environments ranging from the offshore to health care sectors. In particular, micro-abrasion-corrosion can occur in oral processing, where the abrasive components of food interacting with the acidic environment, can lead to degradation of the surface dentine of teeth. Artificial neural networks (ANNs) are computing mechanisms based on the biological brain. They are very effective in various areas such as modelling, classification and pattern recognition. They have been successfully applied in almost all areas of engineering and many practical industrial applications. Hence, in this paper an attempt has been made to model the data obtained in microabrasion-corrosion experiments on polymer/steel couple and a ceramic/lasercarb coating couple using ANN. A multilayer perceptron (MLP) neural network is applied and the results obtained from modelling the tribocorrosion processes will be compared with those obtained from a relatively new class of neural networks namely resource allocation network
Using Dynamic Voltage Drive in a Parallel-Plate Electrostatic Actuator for Full-Gap Travel Range and Positioning
Geometric evaluation of stiffened steel plates subjected to transverse loading for naval and offshore applications
This work searched for the optimal geometrical configuration of simply supported stiffened plates subjected to a transverse and uniformly distributed load. From a non-stiffened reference plate, different geometrical configurations of stiffened plates, with the same volume as the reference plate, were defined through the constructal design method. Thus, applying the exhaustive search technique and using the ANSYS software, the mechanical behaviors of all the suggested stiffened plates were compared to each other to find the geometrical configuration that provided the minimum deflection in the plate's center when subjected to this loading. The optimum geometrical configuration of stiffeners is presented at the end of this work, allowing a reduction of 98.57% for the central deflection of the stiffened plate if compared to the reference plate. Furthermore, power equations were adjusted to describe the deflections for each combination of longitudinal and transverse stiffeners as a function of the ratio between the height and the thickness of the stiffeners. Finally, a unique equation for determining the central deflections of the studied stiffened plates based only on the number of longitudinal stiffeners without significantly losing accuracy has been proposed
Mob Rulers And Part-time Cleaners: Two Reef Fish Associations At The Isolated Ascension Island
Isolated oceanic islands may give rise not only to new and endemic species, but also to unique behaviours and species interactions. Multi-species fish interactions, such as cleaning, following, mob-feeding and others are understudied in these ecosystems. Here we present qualitative and quantitative observations on cleaning and mob-feeding reef fish associations at the isolated Ascension Island, South Atlantic Ocean. Cleaning interactions were dominated by juveniles of the facultative fish cleaners Bodianus insularis and Pomacanthus paru, with lesser contributions of Chaetodon sanctaehelenae, Thalassoma ascensionis and the cleaner shrimp Lysmata grabhami. Two types of feeding mobs were consistently identified: less mobile mobs led by the surgeonfish Acanthurus bahianus and A. coeruleus and the more mobile mobs led by the African sergeant Abudefduf hoefleri. This is the first record of A. hoefleri from outside of the Eastern Atlantic and also the first report of this species displaying mob-feeding behaviour. The principal follower of both mob types was the extremely abundant Melichthys niger, but the main aggressor differed: Stegastes lubbocki, a highly territorial herbivore, was the main aggressor of Acanthurus mobs; and Chromis multilineata a territorial fish while engaged in egg parental care, was the principal aggressor towards Abudefduf mobs. Our study enhances the scarce information on reef fish feeding associations at the isolated Ascension Island and at oceanic islands in the Atlantic in general. Copyright © Marine Biological Association of the United Kingdom 201611
Genetic characterization of Toxoplasma gondii isolates from pigs intended for human consumption in Brazil
AbstractThis study genetically Toxoplasma gondii isolates obtained from pigs intended for human consumption in northeastern Brazil; multilocus PCR-RFLP and sequencing techniques were utilized. Bioassays were conducted using the brain and tongue of 20 pig heads purchased at butcher shops in the city of Ilheus, Bahia, Brazil. Overall, 11 T. gondii isolates designated TgPgBr06-16 were identified. Application of multilocus PCR-RFLP with seven molecular markers (SAG1, SAG2, SAG3, BTUB, C22-8, PK1 and Apico) identified six different genotypes. Isolates TgPgBr 06, 08, 11, 12, 14 and 15 were indistinguishable by this technique, forming a single genotype; the remaining isolates were characterized as distinct genotypes. However, when five genetic markers (SAG1, SAG2, SAG3, BTUB and c22-8) were employed in multilocus PCR-sequencing, all eleven strains of T. gondii were shown to be different. All isolates differed from Type I, II and III clonal genotypes using both genotyping techniques. These results demonstrate that the multilocus PCR-RFLP assay underestimated the true diversity of the T. gondii population in this study. Thus, DNA sequencing is the preferred technique to infer the genetic diversity and population structure of T. gondii strains from Brazil. Moreover, it is necessary to develop new molecular markers to group and characterize atypical T. gondii isolates from South America
- …