Lack of microbiological concordance between bone and non-bone specimens in chronic osteomyelitis: an observational study

BACKGROUND: Prognosis of chronic osteomyelitis depends heavily on proper identification and treatment of the bone-infecting organism. Current knowledge on selecting the best specimen for culture is confusing, and many consider that non-bone specimens are suitable to replace bone cultures. This paper compares the microbiology of non-bone specimens with bone cultures, taking the last as the diagnostic gold standard. METHODS: Retrospective observational analysis of 50 patients with bacterial chronic osteomyelitis in a 750-bed University-based hospital. RESULTS: Concordance between both specimens for all etiologic agents was 28%, for Staphylococcus aureus 38%, and for organisms other than S. aureus 19%. The culture of non-bone specimens to identify the causative organisms in chronic osteomyelitis produced 52% false negatives and 36% false positives when compared against bone cultures. CONCLUSIONS: Diagnosis and therapy of chronic osteomyelitis cannot be guided by cultures of non-bone specimens because their microbiology is substantially different to the microbiology of the bone

Novel Topical Microbicides Through Combinatorial Strategies

Purpose Developing microbicides for topical epithelial applications is extremely challenging, as evidenced by the scarcity of approved products even after decades of research. Chemical enhancers, including surfactants, are known to be effective antimicrobial agents but are typically toxic towards epithelial cells. Here, we report on the discovery of unique surfactant formulations with improved safety and efficacy profile for epithelial applications, via a combination of high throughput screening techniques. Methods Over three-hundred formulations derived from nine surfactants were screened for antibacterial properties against E. coli in vitro. A subset of these formulations showed high antibacterial activity and was screened for cytotoxicity in vitro. Formulations showing high antibacterial activity and reduced cytotoxicity compared to their individual components were tested for efficacy against B. thailendensis, a model for melioidosis-causing B. pseudomallei. Results Lead formulations showed lower toxicity towards epidermal keratinocytes, with LC50 values up to 3.5-fold higher than their component surfactants, while maintaining antibacterial efficacy against B. thailendensis. Conclusions Our results demonstrate that such a combinatorial screening approach can be used for designing safe and potent microbicides for epithelial applications

The epidemiology of hematogenous vertebral osteomyelitis: a cohort study in a tertiary care hospital

<p>Abstract</p> <p>Background</p> <p>Vertebral osteomyelitis is a common manifestation of osteomyelitis in adults and associated with considerable morbidity. Limited data exist regarding hematogenous vertebral osteomyelitis. Our objective was to describe the epidemiology and management of hematogenous vertebral osteomyelitis.</p> <p>Methods</p> <p>We performed a 2-year retrospective cohort study of adult patients with hematogenous vertebral osteomyelitis at a tertiary care hospital.</p> <p>Results</p> <p>Seventy patients with hematogenous vertebral osteomyelitis were identified. The mean age was 59.7 years (±15.0) and 38 (54%) were male. Common comorbidities included diabetes (43%) and renal insufficiency (24%). Predisposing factors in the 30 days prior to admission included bacteremia (19%), skin/soft tissue infection (17%), and having an indwelling catheter (30%). Back pain was the most common symptom (87%). Seven (10%) patients presented with paraplegia. Among the 46 (66%) patients with a microbiological diagnosis, the most common organisms were methicillin-susceptible <it>S. aureus </it>[15 (33%) cases], and methicillin-resistant <it>S. aureus </it>[10 (22%)]. Among the 44 (63%) patients who had a diagnostic biopsy, open biopsy was more likely to result in pathogen recovery [14 (93%) of 15 with open biopsy vs. 14 (48%) of 29 with needle biopsy; p = 0.003]. Sixteen (23%) patients required surgical intervention for therapeutic purposes during admission.</p> <p>Conclusions</p> <p>This is one of the largest series of hematogenous vertebral osteomyelitis. A microbiological diagnosis was made in only approximately two-thirds of cases. <it>S. aureus </it>was the most common causative organism, of which almost half the isolates were methicillin-resistant.</p

Combinatorial discovery of polymers resistant to bacterial attachment

Bacterial attachment and subsequent biofilm formation are key challenges to the long term performance of many medical devices. Here, a high throughput approach coupled with the analysis of surface structure-property relationships using a chemometics approach has been developed to simultaneously investigate the interaction of bacteria with hundreds of polymeric materials on a microarray format. Using this system, a new group of materials comprising ester and hydrophobic moieties are identified that dramatically reduce the attachment of clinically relevant, pathogenic bacteria (Pseudomonas aeruginosa, Staphylococcus aureus and uropathogenic Escherichia coli). Hit materials coated on silicone catheters resulted in up to a 30 fold reduction in coverage compared to a commercial silver embedded catheter, which has been proven to half the incidence of clinically acquired infection. These polymers represent a new class of materials resistant to bacterial attachment that could not have been predicted from the current understanding of bacteria-surface interactions

The Effect of Bacterial Infection on the Biomechanical Properties of Biological Mesh in a Rat Model

BACKGROUND: The use of biologic mesh to repair abdominal wall defects in contaminated surgical fields is becoming the standard of practice. However, failure rates and infections of these materials persist clinically. The purpose of this study was to determine the mechanical properties of biologic mesh in response to a bacterial encounter. METHODS: A rat model of Staphylococcus aureus colonization and infection of subcutaneously implanted biologic mesh was used. Samples of biologic meshes (acellular human dermis (ADM) and porcine small intestine submucosa (SIS)) were inoculated with various concentrations of methicillin-resistant Staphylococcus aureus [10(5), 10(9) colony-forming units] or saline (control) prior to wound closure (n = 6 per group). After 10 or 20 days, meshes were explanted, and cultured for bacteria. Histological changes and bacterial recovery together with biomechanical properties were assessed. Data were compared using a 1-way ANOVA or a Mann-Whitney test, with p<0.05. RESULTS: The overall rate of staphylococcal mesh colonization was 81% and was comparable in the ADM and SIS groups. Initially (day 0) both biologic meshes had similar biomechanical properties. However after implantation, the SIS control material was significantly weaker than ADM at 20 days (p = 0.03), but their corresponding modulus of elasticity were similar at this time point (p>0.05). After inoculation with MRSA, a time, dose and material dependent decrease in the ultimate tensile strength and modulus of elasticity of SIS and ADM were noted compared to control values. CONCLUSION: The biomechanical properties of biologic mesh significantly decline after colonization with MRSA. Surgeons selecting a repair material should be aware of its biomechanical fate relative to other biologic materials when placed in a contaminated environment

A Mouse Model of Post-Arthroplasty Staphylococcus aureus Joint Infection to Evaluate In Vivo the Efficacy of Antimicrobial Implant Coatings

Post-arthroplasty infections represent a devastating complication of total joint replacement surgery, resulting in multiple reoperations, prolonged antibiotic use, extended disability and worse clinical outcomes. As the number of arthroplasties in the U.S. will exceed 3.8 million surgeries per year by 2030, the number of post-arthroplasty infections is projected to increase to over 266,000 infections annually. The treatment of these infections will exhaust healthcare resources and dramatically increase medical costs.To evaluate novel preventative therapeutic strategies against post-arthroplasty infections, a mouse model was developed in which a bioluminescent Staphylococcus aureus strain was inoculated into a knee joint containing an orthopaedic implant and advanced in vivo imaging was used to measure the bacterial burden in real-time. Mice inoculated with 5x10(3) and 5x10(4) CFUs developed increased bacterial counts with marked swelling of the affected leg, consistent with an acute joint infection. In contrast, mice inoculated with 5x10(2) CFUs developed a low-grade infection, resembling a more chronic infection. Ex vivo bacterial counts highly correlated with in vivo bioluminescence signals and EGFP-neutrophil fluorescence of LysEGFP mice was used to measure the infection-induced inflammation. Furthermore, biofilm formation on the implants was visualized at 7 and 14 postoperative days by variable-pressure scanning electron microscopy (VP-SEM). Using this model, a minocycline/rifampin-impregnated bioresorbable polymer implant coating was effective in reducing the infection, decreasing inflammation and preventing biofilm formation.Taken together, this mouse model may represent an alternative pre-clinical screening tool to evaluate novel in vivo therapeutic strategies before studies in larger animals and in human subjects. Furthermore, the antibiotic-polymer implant coating evaluated in this study was clinically effective, suggesting the potential for this strategy as a therapeutic intervention to combat post-arthroplasty infections

Development of a High-Throughput Candida albicans Biofilm Chip

We have developed a high-density microarray platform consisting of nano-biofilms of Candida albicans. A robotic microarrayer was used to print yeast cells of C. albicans encapsulated in a collagen matrix at a volume as low as 50 nL onto surface-modified microscope slides. Upon incubation, the cells grow into fully formed “nano-biofilms”. The morphological and architectural complexity of these biofilms were evaluated by scanning electron and confocal scanning laser microscopy. The extent of biofilm formation was determined using a microarray scanner from changes in fluorescence intensities due to FUN 1 metabolic processing. This staining technique was also adapted for antifungal susceptibility testing, which demonstrated that, similar to regular biofilms, cells within the on-chip biofilms displayed elevated levels of resistance against antifungal agents (fluconazole and amphotericin B). Thus, results from structural analyses and antifungal susceptibility testing indicated that despite miniaturization, these biofilms display the typical phenotypic properties associated with the biofilm mode of growth. In its final format, the C. albicans biofilm chip (CaBChip) is composed of 768 equivalent and spatially distinct nano-biofilms on a single slide; multiple chips can be printed and processed simultaneously. Compared to current methods for the formation of microbial biofilms, namely the 96-well microtiter plate model, this fungal biofilm chip has advantages in terms of miniaturization and automation, which combine to cut reagent use and analysis time, minimize labor intensive steps, and dramatically reduce assay costs. Such a chip should accelerate the antifungal drug discovery process by enabling rapid, convenient and inexpensive screening of hundreds-to-thousands of compounds simultaneously