Energy-Dependent Timing of Thermal Emission in Solar Flares

We report solar flare plasma to be multi-thermal in nature based on the theoretical model and study of the energy-dependent timing of thermal emission in ten M-class flares. We employ high-resolution X-ray spectra observed by the Si detector of the "Solar X-ray Spectrometer" (SOXS). The SOXS onboard the Indian GSAT-2 spacecraft was launched by the GSLV-D2 rocket on 8 May 2003. Firstly we model the spectral evolution of the X-ray line and continuum emission flux F(\epsilon) from the flare by integrating a series of isothermal plasma flux. We find that multi-temperature integrated flux F(\epsilon) is a power-law function of \epsilon with a spectral index (\gamma) \approx -4.65. Next, based on spectral-temporal evolution of the flares we find that the emission in the energy range E= 4 - 15 keV is dominated by temperatures of T= 12 - 50 MK, while the multi-thermal power-law DEM index (\gamma) varies in the range of -4.4 and -5.7. The temporal evolution of the X-ray flux F(\epsilon,t) assuming a multi-temperature plasma governed by thermal conduction cooling reveals that the temperature-dependent cooling time varies between 296 and 4640 s and the electron density (n_e) varies in the range of n_e= (1.77-29.3)*10^10 cm-3. Employing temporal evolution technique in the current study as an alternative method for separating thermal from non-thermal components in the energy spectra, we measure the break-energy point ranging between 14 and 21\pm1.0 keV.Comment: Solar Physics, in pres

Very High Resolution Solar X-ray Imaging Using Diffractive Optics

This paper describes the development of X-ray diffractive optics for imaging solar flares with better than 0.1 arcsec angular resolution. X-ray images with this resolution of the \geq10 MK plasma in solar active regions and solar flares would allow the cross-sectional area of magnetic loops to be resolved and the coronal flare energy release region itself to be probed. The objective of this work is to obtain X-ray images in the iron-line complex at 6.7 keV observed during solar flares with an angular resolution as fine as 0.1 arcsec - over an order of magnitude finer than is now possible. This line emission is from highly ionized iron atoms, primarily Fe xxv, in the hottest flare plasma at temperatures in excess of \approx10 MK. It provides information on the flare morphology, the iron abundance, and the distribution of the hot plasma. Studying how this plasma is heated to such high temperatures in such short times during solar flares is of critical importance in understanding these powerful transient events, one of the major objectives of solar physics. We describe the design, fabrication, and testing of phase zone plate X-ray lenses with focal lengths of \approx100 m at these energies that would be capable of achieving these objectives. We show how such lenses could be included on a two-spacecraft formation-flying mission with the lenses on the spacecraft closest to the Sun and an X-ray imaging array on the second spacecraft in the focal plane \approx100 m away. High resolution X-ray images could be obtained when the two spacecraft are aligned with the region of interest on the Sun. Requirements and constraints for the control of the two spacecraft are discussed together with the overall feasibility of such a formation-flying mission

Response to Comment on “Mycorrhizal association as a primary control of the CO 2 fertilization effect”

Norby et al. center their critique on the design of the data set and the response variable used. We address these criticisms and reinforce the conclusion that plants that associate with ectomycorrhizal fungi exhibit larger biomass and growth responses to elevated CO2 compared with plants that associate with arbuscular mycorrhizae

Determining Histories of Slip on Normal Faults With Bedrock Scarps Using Cosmogenic Nuclide Exposure Data

Cosmogenic exposure data can be used to calculate time-varying fault slip rates on normal faults with exposed bedrock scarps. The method relies on assumptions related to how the scarp is preserved, which should be consistent at multiple locations along the same fault. Previous work commonly relied on cosmogenic data from a single sample locality to determine the slip rate of a fault. Here we show that by applying strict sampling criteria and using geologically informed modeling parameters in a Bayesian-inference Markov chain Monte Carlo method, similar patterns of slip rate changes can be modeled at multiple sites on the same fault. Consequently, cosmogenic data can be used to resolve along-strike fault activity. We present cosmogenic 36Cl concentrations from seven sites on two faults in the Italian Apennines. The average slip rate varies between sites on the Campo Felice Fault (0.84 ± 0.23 to 1.61 ± 0.27 mm yr−1), and all sites experienced a period of higher than average slip rate between 0.5 and 2 ka and a period of lower than average slip rate before 3 ka. On the Roccapreturo fault, slip rate in the center of the fault is 0.55 ± 0.11 and 0.35 ± 0.05 mm yr−1 at the fault tip near a relay zone. The estimated time since the last earthquake is the same at each site along the same fault (631 ± 620 years at Campo Felice and 2,603 ± 1,355 years at Roccapreturo). These results highlight the potential for cosmogenic exposure data to reveal the detailed millennial history of earthquake slip on active normal faults

Nucleon Spin-Polarisabilities from Polarisation Observables in Low-Energy Deuteron Compton Scattering

We investigate the dependence of polarisation observables in elastic deuteron Compton scattering below the pion production threshold on the spin-independent and spin-dependent iso-scalar dipole polarisabilities of the nucleon. The calculation uses Chiral Effective Field Theory with dynamical Delta(1232) degrees of freedom in the Small Scale Expansion at next-to-leading order. Resummation of the NN intermediate rescattering states and including the Delta induces sizeable effects. The analysis considers cross-sections and the analysing power of linearly polarised photons on an unpolarised target, and cross-section differences and asymmetries of linearly and circularly polarised beams on a vector-polarised deuteron. An intuitive argument helps one to identify kinematics in which one or several polarisabilities do not contribute. Some double-polarised observables are only sensitive to linear combinations of two of the spin-polarisabilities, simplifying a multipole-analysis of the data. Spin-polarisabilities can be extracted at photon energies \gtrsim 100 MeV, after measurements at lower energies of \lesssim 70 MeV provide high-accuracy determinations of the spin-independent ones. An interactive Mathematica 7.0 notebook of our findings is available from [email protected]: 30 pages LaTeX2e, including 22 figures as 66 .eps file embedded with includegraphicx; three errors in initial submission corrected. This submission includes ot the erratum to be published in EPJA (2012) and the corrections in the tex

Nucleon Polarizabilities from Deuteron Compton Scattering within a Green's-Function Hybrid Approach

We examine elastic Compton scattering from the deuteron for photon energies ranging from zero to 100 MeV, using state-of-the-art deuteron wave functions and NN-potentials. Nucleon-nucleon rescattering between emission and absorption of the two photons is treated by Green's functions in order to ensure gauge invariance and the correct Thomson limit. With this Green's-function hybrid approach, we fulfill the low-energy theorem of deuteron Compton scattering and there is no significant dependence on the deuteron wave function used. Concerning the nucleon structure, we use Chiral Effective Field Theory with explicit \Delta(1232) degrees of freedom within the Small Scale Expansion up to leading-one-loop order. Agreement with available data is good at all energies. Our 2-parameter fit to all elastic $\gamma d$ data leads to values for the static isoscalar dipole polarizabilities which are in excellent agreement with the isoscalar Baldin sum rule. Taking this value as additional input, we find \alpha_E^s= (11.3+-0.7(stat)+-0.6(Baldin)) x 10^{-4} fm^3 and \beta_M^s = (3.2-+0.7(stat)+-0.6(Baldin)) x 10^{-4} fm^3 and conclude by comparison to the proton numbers that neutron and proton polarizabilities are essentially the same.Comment: 47 pages LaTeX2e with 20 figures in 59 .eps files, using graphicx. Minor modifications; extended discussion of theoretical uncertainties of polarisabilities extraction. Version accepted for publication in EPJ

Nonlocality of the NN interaction in an effective field theory

We investigate low energy nucleon dynamics in the effective field theory (EFT) of nuclear forces. In leading order of the two-nucleon EFT we show that nucleon dynamics is governed by the generalized dynamical equation with a nonlocal-in-time interaction operator. This equation is shown to open new possibilities for applying the EFT approach to the description of low energy nucleon dynamics.Comment: 13 pages, 4 figures, REVTeX

Energy Release During Slow Long Duration Flares Observed by RHESSI

Slow Long Duration Events (SLDEs) are flares characterized by long duration of rising phase. In many such cases impulsive phase is weak with lack of typical short-lasting pulses. Instead of that smooth, long-lasting Hard X-ray (HXR) emission is observed. We analysed hard X-ray emission and morphology of six selected SLDEs. In our analysis we utilized data from RHESSI and GOES satellites. Physical parameters of HXR sources were obtained from imaging spectroscopy and were used for the energy balance analysis. Characteristic time of heating rate decrease, after reaching its maximum value, is very long, which explains long rising phase of these flares.Comment: Accepted for publication in Solar Physic

Are bioresorbable polylactate devices comparable to titanium devices for stabilizing Le Fort I advancement?

AbstractThe purpose of this study was to evaluate whether skeletal and dental outcomes following Le Fort I surgery differed when stabilization was performed with polylactate bioresorbable devices or titanium devices. Fifty-seven patients with preoperative records and at least 1 year postoperative records were identified and grouped according to the stabilization method. All cephalometric X-rays were traced and digitized by a single operator. Analysis of covariance was used to compare the postsurgical change between the two stabilization methods. Twenty-seven patients received bioresorbable devices (group R), while 30 received titanium devices (group M). There were no statistically significant differences between the two groups with respect to gender, race/ethnicity, age, or dental and skeletal movements during surgery. Subtle postsurgical differences were noted, but were not statistically significant. Stabilization of Le Fort I advancement with polylactate bioresorbable and titanium devices produced similar clinical outcomes at 1 year following surgery