De-icing of the altitude wind tunnel turning vanes by electro-magnetic impulse

The Altitude Wind Tunnel at the NASA-Lewis facility is being proposed for a refurbishment and moderization. Two major changes are: (1) the increasing of the test section Mach number to 0.90, and (2) the addition of spray nozzles to provide simulation of flight in icing clouds. Features to be retained are the simulation of atmospheric temperature and pressure to 50,000 foot altitude and provision for full-scale aircraft engine operation by the exhausting of the aircraft combustion gases and ingestion of air to replace that used in combustion. The first change required a re-design of the turning vanes in the two corners downstream of the test section due to the higher Mach number at the corners. The second change threatens the operation of the turning vanes by the expected ice build-up, particulary on the first-corner vanes. De-icing by heat has two drawbacks: (1) an extremely large amount of heat is required, and (2) the melted ice would tend to collect as ice on some other surfaces in the tunnel, namely, the tunnel propellers and the cooling coils. An alternate de-icing method had been under development for three years under NASA-Lewis grants to the Wichita State University. This report describes the electro-impulse de-icing (EIDI) method and the testing work done to assess its applicability to wind tunnel turning vane de-icing. Tests were conducted in the structural dynamics laboratory and in the NASA Icing Research Tunnel. Good ice protection was achieved at lower power consumption and at a wide range of tunnel operations conditions. Recommendations for design and construction of the system for this application of the EIDI method are given

Gas-liquid chromatography of amino acids in biological substances

Developing gas-liquid chromatographic method for quantitative analysis of amino acids in blood plasma and urin

Electro-impulse de-icing testing analysis and design

Electro-Impulse De-Icing (EIDI) is a method of ice removal by sharp blows delivered by a transient electromagnetic field. Detailed results are given for studies of the electrodynamic phenomena. Structural dynamic tests and computations are described. Also reported are ten sets of tests at NASA's Icing Research Tunnel and flight tests by NASA and Cessna Aircraft Company. Fabrication of system components are described and illustrated. Fatigue and electromagnetic interference tests are reported. Here, the necessary information for the design of an EIDI system for aircraft is provided

Studies of thermionic materials for space power applications informal monthly report, oct. 1 - oct. 31, 1963

Thermionic space power material - isostatic pressing, vapor deposited tungsten, high temperature properties, cesium thermionic cell life testing, and irradiation studie

Weak Interaction Studies with 6He

The 6He nucleus is an ideal candidate to study the weak interaction. To this end we have built a high-intensity source of 6He delivering ~10^10 atoms/s to experiments. Taking full advantage of that available intensity we have performed a high-precision measurement of the 6He half-life that directly probes the axial part of the nuclear Hamiltonian. Currently, we are preparing a measurement of the beta-neutrino angular correlation in 6He beta decay that will allow to search for new physics beyond the Standard Model in the form of tensor currents.Comment: 5 pages, 4 figures, proceedings for the Eleventh Conference on the Intersections of Particle and Nuclear Physics (CIPANP 2012

Precision Measurement of the 6He Half-Life and the Weak Axial Current in Nuclei

Studies of 6He beta decay along with tritium can play an important role in testing ab-initio nuclear wave-function calculations and may allow for fixing low-energy constants in effective field theories. Here, we present an improved determination of the 6He half-life to a relative precision of 3x10^(-4). Our value of 806.89 \pm 0.11(stat)^{+0.23}_{-0.19}(syst) ms resolves a major discrepancy between previous measurements. Calculating the statistical rate function we determined the ft-value to be 803.04 ^{+0.26}_{-0.23} s. The extracted Gamow-Teller matrix element agrees within a few percent with ab-initio calculations.Comment: 5 pages, 2 figures, published in Physical Review Letter

Precision Measurement of the 6He Half-Life and the Weak Axial Current in Nuclei

Background: The β decays of 3H and 6He can play an important role in testing nuclear wave-function calculations and fixing low-energy constants in effective-field theory approaches. However, there exists a large discrepancy between previous measurements of the 6He half-life. Purpose: Our measurement aims at resolving this long-standing discrepancy in the 6He half-life and providing a reliable ft value and Gamow-Teller matrix element for comparison with theoretical ab initio calculations. Method: We measured the 6He half-life by counting the β-decay electrons with two scintillator detectors operating in coincidence. Results: The measured 6He half-life is 806.89±0.11 stat-0.19+0.23syst ms corresponding to a relative precision of 3×10-4. Calculating the statistical rate function we determined the ft value to be 803.04-0.23+0.26 s. Conclusions: Our result resolves the previous discrepancy by providing a higher-precision result with careful analysis of potential systematic uncertainties. The result provides a reliable basis for future precision comparisons with ab initio calculations. © 2012 American Physical Society

Weak Interaction Studies ith \u3csup\u3e6\u3c/sup\u3eHe

The 6He nucleus is an ideal candidate to study the weak interaction. To this end we have built a high-intensity source of 6He delivering ∼1010 atoms/s to experiments. Taking full advantage of that available intensity we have performed a high-precision measurement of the 6He half-life that directly probes the axial part of the nuclear Hamiltonian. Currently, we are preparing a measurement of the beta-neutrino angular correlation in 6He beta decay that will allow to search for new physics beyond the Standard Model in the form of tensor currents. © 2013 AIP Publishing LLC

Entry, Descent and Landing Systems Analysis Study: Phase 1 Report

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to make in order to successfully land large payloads at Mars for both robotic and human-scale missions. This paper summarizes the motivation, approach and top-level results from Year 1 of the study, which focused on landing 10-50 mt on Mars, but also included a trade study of the best advanced parachute design for increasing the landed payloads within the EDL architecture of the Mars Science Laboratory (MSL) missio