Mod silver metallization: Screen printing and ink-jet printing

Basic material efforts have proven to be very successful. Adherent and conductive films were achieved. A silver neodecanoate/bismuth 2-ethylhexanoate mixture has given the best results in both single and double layer applications. Another effort is continuing to examine the feasibility of applying metallo-organic deposition films by use of an ink jet printer. Direct line writing would result in a saving of process time and materials. So far, some well defined lines have been printed

MOD silver metallization for photovoltaics

Photovoltaic cells require back side metallization and a collector grid system on the front surface. Both front and back surface metallizations should have good adhesion, low contact resistance, low sheet resistance, long term stability, and their deposition methods should not degrade the n-p junction. Advantages and disadvantages of different deposition methods are discussed

Effects of particle size distribution in thick film conductors

Studies of particle size distribution in thick film conductors are discussed. The distribution of particle sizes does have an effect on fired film density but the effect is not always positive. A proper distribution of sizes is necessary, and while the theoretical models can serve as guides to selecting this proper distribution, improved densities can be achieved by empirical variations from the predictions of the models

Ink jet printing of silver metallization for photovoltaics

Progress was made in the continuing development of the ink jet printing system for thick film circuits. The unit being used is a prototype ink jet printer. One of the first tasks completed was the complete documentation of this ink jet printing system as it existed. It was determined that this was an essential step in deciding what modifications were needed to the system and how these modifications would be implemented. Design modification studies were started for electronic, mechanical, and programming aspects of the ystem. The areas needeing improvement were discussed and applicable changes decided upon. Some improvments were completed. Although the general areas needing improving were identified and some changes decided upon, the exact details of how other changes can be implemented are yet been decided

Bar-holding prosthetic limb

A prosthetic device for below-the-elbow amputees is disclosed. The device has a removable effector, which is attached to the end of an arm cuff. The effector is comprised of a pair of C-shaped members that are oriented so as to face each other. Working in concert, the C-shaped members are able to hold a bar such as a chainsaw handle. A flat spring is fitted around the C-shaped members to hold them together

Prosthetic helping hand

A prosthetic device for below-the-elbow amputees, having a C-shaped clamping mechanism for grasping cylindrical objects, is described. The clamping mechanism is pivotally mounted to a cuff that fits on the amputee's lower arm. The present invention is utilized by placing an arm that has been amputated below the elbow into the cuff. The clamping mechanism then serves as a hand whenever it becomes necessary for the amputee to grasp a cylindrical object such as a handle, a bar, a rod, etc. To grasp the cylindrical object, the object is jammed against the opening in the C-shaped spring, causing the spring to open, the object to pass to the center of the spring, and the spring to snap shut behind the object. Various sizes of clamping mechanisms can be provided and easily interchanged to accommodate a variety of diameters. With the extension that pivots and rotates, the clamping mechanism can be used in a variety of orientations. Thus, this invention provides the amputee with a clamping mechanism that can be used to perform a number of tasks

Tabulation, bibliography, and structure of binary intermetallic compounds. II. Compounds of berylium, magnesium, and calcium

This is a tabulation, bibliography, and structure of binary intermetallic compounds, including those of berylium, magnesium, and calcium. This report is the second in a series. ISC-795 ~ the first in this series~ listed the compounds of lithium, sodium, potassium, and rubidium

Faraday waves on a viscoelastic liquid

We investigate Faraday waves on a viscoelastic liquid. Onset measurements and a nonlinear phase diagram for the selected patterns are presented. By virtue of the elasticity of the material a surface resonance synchronous to the external drive competes with the usual subharmonic Faraday instability. Close to the bicriticality the nonlinear wave interaction gives rise to a variety of novel surface states: Localised patches of hexagons, hexagonal superlattices, coexistence of hexagons and lines. Theoretical stability calculations and qualitative resonance arguments support the experimental observations.Comment: 4 pages, 4figure

Thoroughness of Mediastinal Staging in Stage IIIA Non-small Cell Lung Cancer

IntroductionGuidelines recommend that patients with clinical stage IIIA non-small cell lung cancer (NSCLC) undergo histologic confirmation of pathologic lymph nodes. Studies have suggested that invasive mediastinal staging is underutilized, although practice patterns have not been rigorously evaluated.MethodsWe used the Surveillance, Epidemiology, and End Results-Medicare database to identify patients with stage IIIA NSCLC diagnosed from 1998 through 2005. Invasive staging and use of positron emission tomography (PET) scanning were assessed using Medicare claims. Multivariable logistic regression was used to identify patient characteristics associated with use of invasive staging.ResultsOf 7583 stage IIIA NSCLC patients, 1678 (22%) underwent invasive staging. Patients who received curative intent cancer treatment were more likely to undergo invasive staging than patients who did not receive cancer-specific therapy (30% versus 9.8%, adjusted odds ratio, 3.31; 95% confidence interval, 2.78–3.95). The oldest patients (age, 85–94 years) were less likely to receive invasive staging than the youngest (age, 67–69 years; 27.6% versus 11.9%; odds ratio, 0.46; 95% confidence interval, 0.34–0.61). Sex, marital status, income, and race were not associated with the use of the invasive staging. The use of invasive staging was stable throughout the study period, despite an increase in the use of PET scanning from less than 10% of patients before 2000 to almost 70% in 2005.ConclusionNearly 80% of Medicare beneficiaries with stage IIIA NSCLC do not receive guideline adherent mediastinal staging; this failure cannot be entirely explained by patient factors or a reliance on PET imaging. Incentives to encourage use of invasive staging may improve care

Patenting and licensing of university research: promoting innovation or undermining academic values?

Since the 1980s in the US and the 1990s in Europe, patenting and licensing activities by universities have massively increased. This is strongly encouraged by governments throughout the Western world. Many regard academic patenting as essential to achieve 'knowledge transfer' from academia to industry. This trend has far-reaching consequences for access to the fruits of academic research and so the question arises whether the current policies are indeed promoting innovation or whether they are instead a symptom of a pro-intellectual property (IP) culture which is blind to adverse effects. Addressing this question requires both empirical analysis (how real is the link between academic patenting and licensing and 'development' of academic research by industry?) and normative assessment (which justifications are given for the current policies and to what extent do they threaten important academic values?). After illustrating the major rise of academic patenting and licensing in the US and Europe and commenting on the increasing trend of 'upstream' patenting and the focus on exclusive as opposed to non-exclusive licences, this paper will discuss five negative effects of these trends. Subsequently, the question as to why policymakers seem to ignore these adverse effects will be addressed. Finally, a number of proposals for improving university policies will be made