8,545 research outputs found
European user trial of paging by satellite
British Telecom conceived the idea of adapting their existing paging service, together with the use of existing terrestrial pagers, to yield a one way data (i.e., paging) satellite service to mobiles. The user trial of paging by satellites was successful. It demonstrated that services could be provided over a wide geographical area to low priced terminals. Many lessons were learned in unexpected areas. These include the need for extensive liaison with all users involved, especially the drivers, to ensure they understood the potential benefits. There was a significant desire for a return acknowledgement channel or even a return data channel. Above all there is a need to ensure that the equipment can be taken across European borders and legitimately used in all European countries. The next step in a marketing assessment would be to consider the impact of two way data messaging such as INMARSAT-C
Evaluation of omniweave reinforcement for composite fabrication
Molded composites made from type-2 Morganite and/or boron are suitable for structural skins. Layered-in-depth omniweave construction yields higher in-plane strength characteristics than fiber-pitch angle construction, and strength and moduli data vary with fiber orientation
Atmospheric scavenging of solid rocket exhaust effluents
Solid propellant rocket exhaust was directly utilized to ascertain raindrop scavenging rates for hydrogen chloride. Two chambers were used to conduct the experiments; a large, rigid walled, spherical chamber stored the exhaust constituents, while the smaller chamber housing all the experiments was charged as required with rocket exhaust HCl. Surface uptake experiments demonstrated an HCl concentration dependence for distilled water. Sea water and brackish water HCl uptake was below the detection limit of the chlorine-ion analysis technique used. Plant life HCl uptake experiments were limited to corn and soybeans. Plant age effectively correlated the HCl uptake data. Metallic corrosion was not significant for single 20 minute exposures to the exhaust HCl under varying relative humidity. Characterization of the aluminum oxide particles substantiated the similarity between the constituents of the small scale rocket and the full size vehicles
A complete analytical solution for the inverse instantaneous kinematics of a spherical-revolute-spherical (7R) redundant manipulator
Using a method based upon resolving joint velocities using reciprocal screw quantities, compact analytical expressions are generated for the inverse solution of the joint rates of a seven revolute (spherical-revolute-spherical) manipulator. The method uses a sequential decomposition of screw coordinates to identify reciprocal screw quantities used in the resolution of a particular joint rate solution, and also to identify a Jacobian null-space basis used for the direct solution of optimal joint rates. The results of the screw decomposition are used to study special configurations of the manipulator, generating expressions for the inverse velocity solution for all non-singular configurations of the manipulator, and identifying singular configurations and their characteristics. Two functions are therefore served: a new general method for the solution of the inverse velocity problem is presented; and complete analytical expressions are derived for the resolution of the joint rates of a seven degree of freedom manipulator useful for telerobotic and industrial robotic application
Remote sensing in Iowa agriculture
The author has identified the following significant results. Analysis of 1972 single-date coverage indicated that a complete crop classification was not attainable at the test sites. Good multi-date coverage during 1973 indicates that many of the problems encountered in 1972 will be minimized. In addition, the compilation of springtime imagery covering the entire state of Iowa has added a new dimension to interpretation of Iowa's natural resources. ERTS-1 has provided data necessary to achieve the broad synoptic view not attainable through other means. This should provide soils and crop researchers and land use planners a base map of Iowa. Granted and due to the resolution of ERTS-1, not all details are observable for many land use planning needs, but this gives a general and current view of Iowa
Discordance between cosmogenic nuclide concentrations in amalgamated sands and individual fluvial pebbles in an arid zone catchment
Based on cosmogenic 10Be and 26Al analyses in 15 individual detrital quartz pebbles (16–21 mm) and cosmogenic 10Be in amalgamated medium sand (0.25–0.50 mm), all collected from the outlet of the upper Gaub River catchment in Namibia, quartz pebbles yield a substantially lower average denudation rate than those yielded by the amalgamated sand sample. 10Be and 26Al concentrations in the 15 individual pebbles span nearly two orders of magnitude (0.22 ± 0.01 to 20.74 ± 0.52 × 10610Be atoms g−1 and 1.35 ± 0.09 to 72.76 ± 2.04 × 10626Al atoms g−1, respectively) and yield average denudation rates of ∼0.7 m Myr−1 (10Be) and ∼0.9 m Myr−1 (26Al). In contrast, the amalgamated sand yields an average 10Be concentration of 0.77 ± 0.03 × 106 atoms g−1, and an associated mean denudation rate of 9.6 ± 1.1 m Myr−1, an order of magnitude greater than the rates obtained for the amalgamated pebbles. The inconsistency between the 10Be and 26Al in the pebbles and the 10Be in the amalgamated sand is likely due to the combined effect of differential sediment sourcing and longer sediment transport times for the pebbles compared to the sand-sized grains. The amalgamated sands leaving the catchment are an aggregate of grains originating from all quartz-bearing rocks in all parts of the catchment. Thus, the cosmogenic nuclide inventories of these sands record the overall average lowering rate of the landscape. The pebbles originate from quartz vein outcrops throughout the catchment, and the episodic erosion of the latter means that the pebbles will have higher nuclide inventories than the surrounding bedrock and soil, and therefore also higher than the amalgamated sand grains. The order-of-magnitude grain size bias observed in the Gaub has important implications for using cosmogenic nuclide abundances in depositional surfaces because in arid environments, akin to our study catchment, pebble-sized clasts yield substantially underestimated palaeo-denudation rates. Our results highlight the importance of carefully considering geomorphology and grain size when interpreting cosmogenic nuclide data in depositional surfaces
A bystander programme to prevent domestic violence and abuse in UK general communities: evaluation of Active Bystander Communities
This is the author accepted manuscript. the final version is available from Elsevier via the DOI in this recordBristol City CouncilDevon County CouncilPublic Health England South WestUniversity of Exete
Competing mechanisms of stress-assisted diffusivity and stretch-activated currents in cardiac electromechanics
We numerically investigate the role of mechanical stress in modifying the
conductivity properties of the cardiac tissue and its impact in computational
models for cardiac electromechanics. We follow a theoretical framework recently
proposed in [Cherubini, Filippi, Gizzi, Ruiz-Baier, JTB 2017], in the context
of general reaction-diffusion-mechanics systems using multiphysics continuum
mechanics and finite elasticity. In the present study, the adapted models are
compared against preliminary experimental data of pig right ventricle
fluorescence optical mapping. These data contribute to the characterization of
the observed inhomogeneity and anisotropy properties that result from
mechanical deformation. Our novel approach simultaneously incorporates two
mechanisms for mechano-electric feedback (MEF): stretch-activated currents
(SAC) and stress-assisted diffusion (SAD); and we also identify their influence
into the nonlinear spatiotemporal dynamics. It is found that i) only specific
combinations of the two MEF effects allow proper conduction velocity
measurement; ii) expected heterogeneities and anisotropies are obtained via the
novel stress-assisted diffusion mechanisms; iii) spiral wave meandering and
drifting is highly mediated by the applied mechanical loading. We provide an
analysis of the intrinsic structure of the nonlinear coupling using
computational tests, conducted using a finite element method. In particular, we
compare static and dynamic deformation regimes in the onset of cardiac
arrhythmias and address other potential biomedical applications
- …