Thiol-Anchored TIPS-Tetracene Ligands with Quantitative Triplet Energy Transfer to PbS Quantum Dots and Improved Thermal Stability.

Triplet energy transfer between inorganic quantum dots (QDs) and organic materials plays a fundamental role in many optoelectronic applications based on these nanocomposites. Attaching organic molecules to the QD as transmitter ligands has been shown to facilitate transfer both to and from QDs. Here we show that the often disregarded thiol anchoring group can achieve quantitative triplet energy transfer yields in a PbS QD system with 6,11-bis[(triisopropylsilyl)ethynyl]tetracene-2-methylthiol (TET-SH) ligands. We demonstrate efficient triplet transfer in a singlet fission-based photon multiplication system with 5,12-bis[(triisopropylsilyl)ethynyl]tetracene generating triplets in solution that transfer to the PbS QDs via the thiol ligand TET-SH. Importantly, we demonstrate the increased thermal stability of the PbS/TET-SH system, compared to the traditional carboxylic acid counterpart, allowing for higher photoluminescence quantum yields

Engineering Molecular Ligand Shells on Quantum Dots for Quantitative Harvesting of Triplet Excitons Generated by Singlet Fission.

Singlet fission is an exciton multiplication process in organic molecules in which a photogenerated spin-singlet exciton is rapidly and efficiently converted to two spin-triplet excitons. This process offers a mechanism to break the Shockley-Queisser limit by overcoming the thermalization losses inherent to all single-junction photovoltaics. One of the most promising methods to harness the singlet fission process is via the efficient extraction of the dark triplet excitons into quantum dots (QDs) where they can recombine radiatively, thereby converting high-energy photons to pairs of low-energy photons, which can then be captured in traditional inorganic PVs such as Si. Such a singlet fission photon multiplication (SF-PM) process could increase the efficiency of the best Si cells from 26.7% to 32.5%, breaking the Shockley-Queisser limit. However, there has been no demonstration of such a singlet fission photon multiplication (SF-PM) process in a bulk system to date. Here, we demonstrate a solution-based bulk SF-PM system based on the singlet fission material TIPS-Tc combined with PbS QDs. Using a range of steady-state and time-resolved measurements combined with analytical modeling we study the dynamics and mechanism of the triplet harvesting process. We show that the system absorbs >95% of incident photons within the singlet fission material to form singlet excitons, which then undergo efficient singlet fission in the solution phase (135 ± 5%) before quantitative harvesting of the triplet excitons (95 ± 5%) via a low concentration of QD acceptors, followed by the emission of IR photons. We find that in order to achieve efficient triplet harvesting it is critical to engineer the surface of the QD with a triplet transfer ligand and that bimolecular decay of triplets is potentially a major loss pathway which can be controlled via tuning the concentration of QD acceptors. We demonstrate that the photon multiplication efficiency is maintained up to solar fluence. Our results establish the solution-based SF-PM system as a simple and highly tunable platform to understand the dynamics of a triplet energy transfer process between organic semiconductors and QDs, one that can provide clear design rules for new materials.ER

Singlet Fission and Triplet Transfer to PbS Quantum Dots in TIPS-Tetracene Carboxylic Acid Ligands.

Singlet exciton fission allows for the generation of two triplet excitons for each photon absorbed within an organic semiconductor. Efficient harvesting of these triplets could allow for the Shockley-Queisser limit on the power conversion efficiency of single-junction photovoltaics to be broken. Here, we show that singlet fission molecules bound directly to PbS quantum dots as ligands can undergo singlet fission with near unity efficiency and can transfer triplets sequentially into the PbS with near unity efficiency. Within the PbS, the excitations recombine, giving rise of the emission of photons. This allows for the doubling of the quantum dot photoluminescence quantum efficiency when photons are absorbed by the singlet fission ligand, as compared to when directly absorbed in the quantum dot. Our approach demonstrates that it is possible to convert the exciton multiplication process of singlet fission into a photon multiplication process and provides a new path to harness singlet fission with photovoltaics

The Impact of HAART on the Respiratory Complications of HIV Infection: Longitudinal Trends in the MACS and WIHS Cohorts

Objective: To review the incidence of respiratory conditions and their effect on mortality in HIV-infected and uninfected individuals prior to and during the era of highly active antiretroviral therapy (HAART). Design: Two large observational cohorts of HIV-infected and HIV-uninfected men (Multicenter AIDS Cohort Study [MACS]) and women (Women's Interagency HIV Study [WIHS]), followed since 1984 and 1994, respectively. Methods: Adjusted odds or hazards ratios for incident respiratory infections or non-infectious respiratory diagnoses, respectively, in HIV-infected compared to HIV-uninfected individuals in both the pre-HAART (MACS only) and HAART eras; and adjusted Cox proportional hazard ratios for mortality in HIV-infected persons with lung disease during the HAART era. Results: Compared to HIV-uninfected participants, HIV-infected individuals had more incident respiratory infections both pre-HAART (MACS, odds ratio [adjusted-OR], 2.4; 95% confidence interval [CI], 2.2-2.7; p<0.001) and after HAART availability (MACS, adjusted-OR, 1.5; 95%CI 1.3-1.7; p<0.001; WIHS adjusted-OR, 2.2; 95%CI 1.8-2.7; p<0.001). Chronic obstructive pulmonary disease was more common in MACS HIV-infected vs. HIV-uninfected participants pre-HAART (hazard ratio [adjusted-HR] 2.9; 95%CI, 1.02-8.4; p = 0.046). After HAART availability, non-infectious lung diseases were not significantly more common in HIV-infected participants in either MACS or WIHS participants. HIV-infected participants in the HAART era with respiratory infections had an increased risk of death compared to those without infections (MACS adjusted-HR, 1.5; 95%CI, 1.3-1.7; p<0.001; WIHS adjusted-HR, 1.9; 95%CI, 1.5-2.4; p<0.001). Conclusion: HIV infection remained a significant risk for infectious respiratory diseases after the introduction of HAART, and infectious respiratory diseases were associated with an increased risk of mortality. © 2013 Gingo et al

Patient satisfaction with antiretroviral services at primary health-care facilities in the Free State, South Africa – a two-year study using four waves of cross-sectional data

<p>Abstract</p> <p>Background</p> <p>The study's first objective was to determine the levels of patient satisfaction with services at antiretroviral treatment (ART) assessment sites. Differences in patient satisfaction with several aspects of service over time and among health districts were measured. The second objective was to examine the association between human resource shortages and levels of patient satisfaction with services.</p> <p>Methods</p> <p>Four cross-sectional waves of data were collected from a random sample of 975 patients enrolled in the Free State's public-sector ART programme. One-way analysis of variance (ANOVA) with the Bonferroni adjustment for multiple comparisons was used to assess the differences in patient satisfaction among the Province's five districts and among the four waves of data. Correlation coefficient analysis using Pearson's <it>r </it>was used to assess the association between ART nurse vacancy rates and patient satisfaction with the services provided by nurses over time.</p> <p>Results</p> <p>With respect to both general services and the services provided by nurses, our results indicate high overall satisfaction among Free State patients receiving public-sector ART. However, our data present a less positive picture of patient satisfaction with waiting times. Patients in Fezile Dabi District were generally slightly dissatisfied with the waiting times at their assessment sites. In fact, waiting times at assessment sites were the most important predictor of discontent among ART patients. Significant geographical (<it>P </it>< 0.001) and temporal differences (<it>P </it>< 0.005) were observed in these three aspects of patient satisfaction. Patients were most satisfied in Thabo Mofutsanyana District and least satisfied in Motheo District. Patients in Fezile Dabi District were generally slightly dissatisfied with the waiting times at their assessment sites. Finally, our analysis revealed a strong negative association (<it>r </it>= -0.438, <it>P </it>< 0.001) between nurse vacancy rates and mean satisfaction levels with services performed by nurses at baseline. Patients attending facilities with high professional nurse vacancy rates reported significantly less satisfaction with nurses' services than did those attending facilities with fewer vacant nursing posts.</p> <p>Conclusion</p> <p>Collectively, our findings show high levels of patient satisfaction with ART-related services, but also confirm claims by other studies, which have identified human resource shortages as the most important obstacle to a successful South African AIDS strategy.</p

Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion

Blends comprising organic semiconductors and inorganic quantum dots (QDs) are relevant for many optoelectronic applications and devices. However, the individual components in organic-QD blends have a strong tendency to aggregate and phase-separate during film processing, compromising both their structural and electronic properties. Here, we demonstrate a QD surface engineering approach using electronically active, highly soluble semiconductor ligands that are matched to the organic semiconductor host material to achieve well-dispersed inorganic–organic blend films, as characterized by X-ray and neutron scattering, and electron microscopies. This approach preserves the electronic properties of the organic and QD phases and also creates an optimized interface between them. We exemplify this in two emerging applications, singlet-fission-based photon multiplication (SF-PM) and triplet–triplet annihilation-based photon upconversion (TTA-UC). Steady-state and time-resolved optical spectroscopy shows that triplet excitons can be transferred with near unity efficiently across the organic–inorganic interface, while the organic films maintain efficient SF (190% yield) in the organic phase. By changing the relative energy between organic and inorganic components, yellow upconverted emission is observed upon 790 nm NIR excitation. Overall, we provide a highly versatile approach to overcome longstanding challenges in the blending of organic semiconductors with QDs that have relevance for many optical and optoelectronic applications