103,054 research outputs found
Simultaneous junction formation
High-risk, high-payoff improvements to a baseline process sequence of simultaneous junction formation of silicon solar cells are discussed. The feasibility of simultaneously forming front and back junctions of solar cells using liquid dopants on dendritic web silicon was studied. Simultaneous diffusion was compared to sequential diffusion. A belt furnace for the diffusion process was tested
Recommended from our members
Absolute monarchy in France
An original scholarly interpretation of the nature of the French monarchy in the seventeenth and eighteenth centuries. It argues that rather than seeing this monarchy as centralised and administrative, we should see it as a state formation replete with tensions and contradictions. Astute political management, patronage and clientage focused on the court as the centre of the political system, were all essential for the survival of the regime. The chapter thus takes issue with current interpretations in historical sociology, political science and history. The interpretation draws on wide secondary sources and the author's long archival acquaintance with the regime. 16,000 words
Error-correcting codes for high-speed digital computers
Published document discusses method for correcting errors. According to this method, computer operation becomes fault-tolerant, i.e., its operation is error-free in spite of single hardware element malfunction. Also, method provides for detection and correction of repetitive and spurious processing and transmission errors
[Review] Jay M. Smith, ed. (2006) The French nobility in the eighteenth century: reassessments and new approaches
A 6,000 word review article discussing this book and recent approaches to the nobility in eighteenth-century France
Ionospheric Corrections via PIM and Real-Time Data
We describe a method for removing ionospheric effects from single-frequency
radio data a posteriori. This method is based on a theoretical climatological
model developed by the USAF, which returns electron density as a function of
position and time along the line of sight to the source. Together with a model
of the earth's magnetic field, ionospheric delays and Faraday rotation values
ensue. If contemoraneous ionospheric data -- GPS TEC observations or ionosonde
profiles -- exist, they can be incorporated to update the modeled electron
densities.Comment: 6 pages, 2 fiugres; LaTeX2e (96/12/01); uses elsart.cls (2.15,
98/07/15); to appear in New Astronomy Review
Dendritic web-type solar cell mini-modules
Twenty-five minimodules composed of dendritic web solar cells with nominal glass size of 12 by 40 cm were provided for study. The modules were identical with respect to design, materials, and manufacturing and assembly processes to full scale modules. The modules were also electrically functional. These minimodules were fabricated to provide test vehicle for environmental testing and to assess reliability of process and design procedures. The module design and performance are outlined
Process research of non-Czochralski silicon material
Simultaneous diffusion of liquid precursors containing phosphorus and boron into dendritic web silicon to form solar cell structures was investigated. A simultaneous junction formation techniques was developed. It was determined that to produce high quality cells, an annealing cycle (nominal 800 C for 30 min) should follow the diffusion process to anneal quenched-in defects. Two ohm-cm n-base cells were fabricated with efficiencies greater than 15%. A cost analysis indicated that the simultansous diffusion process costs can be as low as 65% of the costs of the sequential diffusion process
Real time integration of user preferences into virtual prototypes
Within new product development (NPD), both virtual prototypes and physical prototypes play important roles in creating, testing and modifying designs. However, in the current design process, these two forms of prototyping methods are normally used independently and converted from one to the other during different design phases. This conversion process is time consuming and expensive and also introduces potential information loss/corruption problems. If the design process requires many iterations, it may simply be impractical to generate all the conversions that are theoretically required. Therefore, the integration of virtual and physical prototyping may offer a possible solution where the design definition is maintained simultaneously in both the virtual and physical environment. The overall aim of this research was to develop an interface or a tool that achieves real time integration of physical and virtual prototyping. “Real time integration” here means changes to the virtual prototypes will reflect any changes that have been made contemporaneously to the physical prototypes, and vice versa. Thus, conversion of the prototype from physical to virtual (or vice versa) will be achieved immediately, hence saving time and cost.
A review of the literature was undertaken to determine what previous research has been conducted in this area. The result of the review shows the research in this area is still in its infancy. The research hypothesis was developed through the use of a questionnaire survey. Totally 102 questionnaires were sent to designers, design directors or design managers to address the issue: will industrial designers want to make use of real time integration and if so, how? The outcome from the literature review drove further development of the research hypothesis and an initial pilot experiment to test this. The pilot trial was designed to address the research questions:
• Can real time physical and virtual prototyping integration be conveniently demonstrated?
• Will designers and users be comfortable using the integration method?
• Will users recognise the benefits of the integration?
The results showed that real time integration between physical and virtual prototyping is necessary in helping designers develop new products and for getting users more closely involved. The future research suggested is that more investigations and experiments are needed to explore a proper method that simultaneously employing these two types of prototyping in product development process.
Keywords:
Physical Prototyping; Virtual Prototyping; Integration; Real Time.</p
Competition in Large Markets
This paper develops a simple and robust implication of free entry followed by competition without substantial strategic interactions: Increasing the number of consumers leaves the distributions of producers' prices and other choices unchanged. In many models featuring non-trivial strategic considerations, producers' prices fall as their numbers increase. Hence, examining the relationship between market size and producers' actions provides a nonparametric tool for empirically discriminating between these distinct approaches to competition. To illustrate its application, I examine observations of restaurants' seating capacities, exit decisions, and prices from 224 U.S. cities. Given factor prices and demographic variables, increasing a city's size increases restaurants' capacities, decreases their exit rate, and decreases their prices. These results suggest that strategic considerations lie at the heart of restaurant pricing and turnover.
- …