400 research outputs found
Uncertainty Analysis of Feature Extraction from Expired Gas Traces
Noninvasive medical analyses are a convenient method to study several pathologies even though their indirect nature often requires a complex processing to determine the relevant health "indicators". The usefulness of such indicators depends on the employed model, but also on the uncertainty that is connected to the complex processing involved in the indicator determination. This paper deals with the problems related to the estimation of the uncertainty when the indicators are computed by means of a nontrivial processing on recorded traces of clinical parameters. The paper is focused on the analysis of expired gas traces, but the procedure can also be applied to many other cases where the processing involves manual or automatic selection of suitable "key points" on repetitive traces
Fast model predictive control for hydrogen outflow regulation in ethanol steam reformers
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.In the recent years, the presence of alternative power sources, such as solar panels, wind farms, hydropumps
and hydrogen-based devices, has significantly increased. The reasons of this trend are clear: contributing to
a reduction of gas emissions and dependency on fossil fuels. Hydrogen-based devices are of particular interest due
to their significant efficiency and reliability. Reforming technologies are among the most economic and efficient ways
of producing hydrogen. In this paper we consider the regulation of hydrogen outflow in an ethanol steam reformer
(ESR). In particular, a fast model predictive control approach based on a finite step response model of the process
is proposed. Simulations performed using a more realistic non-linear model show the effectiveness of the proposed
approach in driving the ESR to different operating conditions while fulfilling input and output constraints.Peer ReviewedPostprint (author's final draft
Mixed Neural-Conventional Processing to Differentiate Airway Diseases by Means of Functional Noninvasive Tests
This paper describes a processing technique that can be used to combine information from different medical analyze to discriminate between different pathologies that have similar symptoms. The paper is focused on the differentiation between asthma, bronchitis, and emphysema, using only functional noninvasives tests, but the proposed technique can be easily applied to other similar situations where different tests have to be used to identify a pathology. The technique is based on mixed neural-and-conventional processing that not only suggests the pathology, but also estimates the reliability of this suggestion
LIONSIMBA: A Matlab Framework Based on a Finite Volume Model Suitable for Li-Ion Battery Design, Simulation, and Control
Consumer electronics, wearable and personal health devices, power networks, microgrids, and hybrid electric vehicles (HEVs) are some of the many applications of lithium-ion batteries. Their optimal design and management are important for safe and profitable operations. The use of accurate mathematical models can help in achieving the best performance. This article provides a detailed description of a finite volume method (FVM) for a pseudo-two-dimensional (P2D) Li-ion battery model suitable for the development of model-based advanced battery management systems. The objectives of this work are to provide: (i) a detailed description of the model formulation, (ii) a parametrizable Matlab framework for battery design, simulation, and control of Li-ion cells or battery packs, (iii) a validation of the proposed numerical implementation with respect to the COMSOL MultiPhysics commercial software and the Newmanâs DUALFOIL code, and (iv) some demonstrative simulations involving thermal dynamics, a hybrid charge-discharge cycle emulating the throttle of an HEV, a model predictive control of state of charge, and a battery pack simulatio
Ventilation heterogeneity in obesity.
Obesity is associated with important decrements in lung volumes. Despite this, ventilation remains normally or near normally distributed at least for moderate decrements in functional residual capacity (FRC). We tested the hypothesis that this is because maximum flow increases presumably as a result of an increased lung elastic recoil. Forced expiratory flows corrected for thoracic gas compression volume, lung volumes, and forced oscillation technique at 5-11-19 Hz were measured in 133 healthy subjects with a body mass index (BMI) ranging from 18 to 50 kg/m(2). Short-term temporal variability of ventilation heterogeneity was estimated from the interquartile range of the frequency distribution of the difference in inspiratory resistance between 5 and 19 Hz (R5-19_IQR). FRC \% predicted negatively correlated with BMI (r = -0.72, P < 0.001) and with an increase in slope of either maximal (r = -0.34, P < 0.01) or partial flow-volume curves (r = -0.30, P < 0.01). Together with a slight decrease in residual volume, this suggests an increased lung elastic recoil. Regression analysis of R5-19_IQR against FRC \% predicted and expiratory reserve volume (ERV) yielded significantly higher correlation coefficients by nonlinear than linear fitting models (r(2) = 0.40 vs. 0.30 for FRC \% predicted and r(2) = 0.28 vs. 0.19 for ERV). In conclusion, temporal variability of ventilation heterogeneities increases in obesity only when FRC falls approximately below 65\% of predicted or ERV below 0.6 liters. Above these thresholds distribution is quite well preserved presumably as a result of an increase in lung recoil
Mechanical correlates of dyspnea in bronchial asthma.
We hypothesized that dyspnea and its descriptors, that is, chest tightness, inspiratory effort, unrewarded inspiration, and expiratory difficulty in asthma reflect different mechanisms of airflow obstruction and their perception varies with the severity of bronchoconstriction. Eighty-three asthmatics were studied before and after inhalation of methacholine doses decreasing the 1-sec forced expiratory volume by ~15% (mild bronchoconstriction) and ~25% (moderate bronchoconstriction). Symptoms were examined as a function of changes in lung mechanics. Dyspnea increased with the severity of obstruction, mostly because of inspiratory effort and chest tightness. At mild bronchoconstriction, multivariate analysis showed that dyspnea was related to the increase in inspiratory resistance at 5 Hz (R 5) (r (2) = 0.10, P = 0.004), chest tightness to the decrease in maximal flow at 40% of control forced vital capacity, and the increase in R 5 at full lung inflation (r (2) = 0.15, P = 0.006), inspiratory effort to the temporal variability in R 5-19 (r (2) = 0.13, P = 0.003), and unrewarded inspiration to the recovery of R 5 after deep breath (r (2) = 0.07, P = 0.01). At moderate bronchoconstriction, multivariate analysis showed that dyspnea and inspiratory effort were related to the increase in temporal variability in inspiratory reactance at 5 Hz (X 5) (r (2) = 0.12, P = 0.04 and r (2) = 0.18, P < 0.001, respectively), and unrewarded inspiration to the decrease in X 5 at maximum lung inflation (r (2) = 0.07, P = 0.04). We conclude that symptom perception is partly explained by indexes of airway narrowing and loss of bronchodilatation with deep breath at low levels of bronchoconstriction, but by markers of ventilation heterogeneity and lung volume recruitment when bronchoconstriction becomes more severe
Uncertainty Quantification for SAE J2954 Compliant Static Wireless Charge Components
The present work aims at quantifying how, and how much, the uncertainties on the components and material parameters of a wireless power transfer (WPT) system for the static charge of electric vehicles affect the overall efficiency and functionality of the final produced device. With the aim of considering the perspective of a possible industrial developer, the parameters selected for the uncertainty quantification are chosen to be the capacitance values of the compensation capacitors and the electromagnetic material parameters used for the construction of the magnetic structure of a WPT system, i.e. the parameters of the elements to be purchased. The analysis is based on a standard system among the ones provided by the current SAE J2954 recommended practice
Enhanced light trapping using plasmonic nanoparticles
International audiencePlasmonics is a new light trapping method used in photovoltaic (PV) solar cells. A significant enhancement of the scattered and absorbed incident light due to the use of silver nanoparticles (Ag-NPs) was observed, which yield to the exaltation of the electromagnetic field in the vicinity of these NPs. In this context, we investigate optically and morphologically the effect of the NPs size dependence on the localized surface plasmon resonance. Extinction, absorption and scattering cross sections are calculated using Mie theory
Hybrid injectable platforms for the in situ delivery of therapeutic ions from mesoporous glasses
Copper-containing bioactive glasses (Cu-MBGs) are attracting increasing interest as multifunctional agents for
hard and soft tissue healing due to the ability of released copper ions to stimulate osteogenesis as well as
angiogenesis and to impart anti-bacterial properties. The conjugation of these nanomaterials with a vehicle
phase based on thermosensitive hydrogels represents an effective strategy to design non-invasive injectable
devices for the in situ delivery of therapeutic ions from MBGs.
In this contribution, Cu-containing MBGs were prepared by an aerosol-assisted spray-drying method (MBG_Cu
2%_SD) in the form of microspheres (surface area of ca 220m2 gâ1) and through a sol-gel synthesis (MBG_Cu 2%
_SG) in the form of spheroidal nanoparticles (surface area above 700m2 gâ1). Both Cu-containing samples were
able to release copper ions, although with different rates and percentage release. MBG_Cu 2%_SG released the
total incorporated amount of Cu ions with a faster kinetics compared to MBG_Cu 2%_SD, that released approximately
the 60% of copper.
Cu-MBGs were incorporated with a final concentration of 20 mg/mL into a thermosensitive sol-gel system
consisting of a novel amphiphilic poly(ether urethane) based on a commercialy available Poloxamer 407 (P407),
with improved gelation ability, mechanical strength and stability in aqueous solution with respect to native
P407. Cu-MBG-loaded hydrogels were characterised in terms of sol-to-gel transition temperature and time, injectability
and stability in aqueous environment at 37 °C. The hybrid formulations showed fast gelation in
physiological conditions (1 mL underwent complete sol-to-gel transition within 3â5 min at 37 °C) and injectability
in a wide range of temperatures (5â37 °C) through different needles (inner diameter in the range
0.6â1.6 mm)
post hoc analysis of clarinet phase iii study to investigate the influence of diabetic status on progression free survival pfs of patients with neuroendocrine tumours nets treated with lanreotide lan or placebo pbo
n/
- âŠ