Effect of Surface Hardness on Joint Contact Forces during Barefoot Running: A Pilot Study

This paper presents an experimental pilot study on the effect of different surface hardness to the joint contact force during barefoot running. Peak joint contact forces during the stance phase of a male subject that running barefoot on three types of surface with different hardness level (concrete, artificial grass and rubber) were investigated experimentally. Differences in peak joint contact force at the ankle, medial tibiofemoral, lateral tibiofemoral, hip and patellofemoral due to surface effects were analysed using Freebody (Version2.1) software. The result showed that the pattern of peak joint contact force was similar for ankle with medial tibiofemoral and hip with lateral patellofemoral. The joint contact force was varied in the varying of the surface hardness. The correlation between various surface hardness and joint contact force was found at the ankle and medial tibiofemoral joint. However, the findings of this pilot study provide the insight into the method and approach selected for the experiment be suitable for an actual experiment for more subjects

Potassium-mediated zincation of ferrocene and ruthenocene : potassium, the architect behind supramolecular structural variations

Direct zincation of ferrocene and ruthenocene by the synergic base [PMDETA.K(μ-TMP)(μ-Me)Zn(Me)] produces the monozincated complexes [{PMDETA.K(μ-Me)2Zn(Fc)}∞] and [{PMDETA.K(μ-Me)2Zn(Rc)}2] respectively, having similar monomeric (dinuclear) units but aggregating supramolecularly in very different polymeric and dimeric forms

Warm measurements of CBA superconducting magnets

We present results on magnetic field measurements of CBA dipole magnets in the warm (normal conductor) and cryogenic (superconducting) states. We apply two methods for the warm measurements, a dc and ac method. We find a good correlation between warm and cryogenic measurements which lends itself to a reliable diagnosis of magnet field errors using warm measurements early in the magnet assembly process. We further find good agreement between the two warm measurement methods, both done at low currents

Comportamiento sísmico y alternativas de Rehabilitación de edificaciones en adobe y tapia Pisada con base en modelos a escala reducida Ensayados en mesa vibratoria

El presente artículo resume los resultados principales de una investigación tendiente a determinar las principales características y propiedades mecánicas de los elementos estructurales que conforman las edificaciones en tierra y a partir de esta información plantear alternativas de rehabilitación sísmica acordes con las características y entorno de este tipo de construcciones en Colombia. Las medidas de rehabilitación planteadas que consisten básicamente en reforzamiento con mallas de acero y pañetes a base de cal y reforzamiento con elementos de madera confinantes, fueron sometidas a un programa experimental mediante la realización de ensayos sobre probetas sometidas a diferentes tipos de solicitaciones, ensayos sobre muros a escala natural sometidos a cargas en el plano y perpendiculares al plano, ensayos de modelos a escala 1:5 sometidos a la acción de mesa vibratoria y ensayos de viviendas a escala 1:1.5 sometidas a carga cíclica horizontal. Los resultados de la investigación permiten establecer las ventajas y desventajas de cada uno de los sistemas de rehabilitación analizados. Se encuentra que, a pesar de la alta vulnerabilidad sísmica de estos sistemas constructivos, el método de rehabilitación con elementos de madera confinantes representa una alternativa viable y atractiva para la disminución del riesgo en este tipo de construcciones

Parallelizing the Chambolle Algorithm for Performance-Optimized Mapping on FPGA Devices

The performance and the efficiency of recent computing platforms have been deeply influenced by the widespread adoption of hardware accelerators, such as Graphics Processing Units (GPUs) or Field Programmable Gate Arrays (FPGAs), which are often employed to support the tasks of General Purpose Processors (GPP). One of the main advantages of these accelerators over their sequential counterparts (GPPs) is their ability of performing massive parallel computation. However, in order to exploit this competitive edge, it is necessary to extract the parallelism from the target algorithm to be executed, which is in general a very challenging task. This concept is demonstrated, for instance, by the poor performance achieved on relevant multimedia algorithms, such as Chambolle, which is a well-known algorithm employed for the optical flow estimation. The implementations of this algorithm that can be found in the state of the art are generally based on GPUs, but barely improve the performance that can be obtained with a powerful GPP. In this paper, we propose a novel approach to extract the parallelism from computation-intensive multimedia algorithms, which includes an analysis of their dependency schema and an assessment of their data reuse. We then perform a thorough analysis of the Chambolle algorithm, providing a formal proof of its inner data dependencies and locality properties. Then, we exploit the considerations drawn from this analysis by proposing an architectural template that takes advantage of the fine-grained parallelism of FPGA devices. Moreover, since the proposed template can be instantiated with different parameters, we also propose a design metric, the expansion rate, to help the designer in the estimation of the efficiency and performance of the different instances, making it possible to select the right one before the implementation phase. We finally show, by means of experimental results, how the proposed analysis and parallelization approach leads to the design of efficient and high-performance FPGA-based implementations that are orders of magnitude faster than the state-of-the-art ones

Greening Capitalism? A Marxist Critique of Carbon Markets

Climate change is increasingly being recognized as a serious threat to dominant modes of social organization, inspiring suggestions that capitalism itself needs to be transformed if we are to ‘decarbonize’ the global economy. Since the Kyoto Protocol in 1997, carbon markets have emerged as the main politico-economic tools in global efforts to address climate change. Newell and Paterson (2010) have recently claimed that the embrace of carbon markets by financial and political elites constitutes a possible first step towards the transformation of current modes of capitalist organization into a new form of greener, more sustainable ‘climate capitalism.’ In this paper, we argue that the institutionalization of carbon markets does not, in fact, represent a move towards the radical transformation of capitalism, but is better understood as the most recent expression of ongoing trends of ecological commodification and expropriation, driving familiar processes of uneven and crisis-prone development. In this paper, we review four critical Marxist concepts: metabolic rift (Foster, 1999), capitalism as world ecology (Moore, 2011a), uneven development and accumulation through dispossession (Harvey, 2003, 2006), and sub-imperialism (Marini, 1972, 1977), developing a framework for a Marxist analysis of carbon markets. Our analysis shows that carbon markets form part of a longer historical development of global capitalism and its relation to nature. Carbon markets, we argue, serve as creative new modes of accumulation, but are unlikely to transform capitalist dynamics in ways that might foster a more sustainable global economy. Our analysis also elucidates, in particular, the role that carbon markets play in exacerbating uneven development within the Global South, as elites in emerging economies leverage carbon market financing to pursue new strategies of sub-imperial expansion. </jats:p

Experimental investigation on the bond behavior of a compatible TRM-based solution for rammed earth heritage

Despite the current awareness of the high seismic risk of earthen structures, little has been done so far to develop proper strengthening solutions for the rammed earth heritage. Based on the effectiveness of TRM for masonry buildings, the strengthening of rammed earth walls with externally bonded fibers using earth-based mortar is being proposed as a compatible solution. In this context, the investigation of bond behavior was conducted by means of direct tensile tests, pull-out tests and single lap-shear tests. The specimens were prepared using earth-based mortars and two different types of meshes (glass and nylon) while considering different-bonded lengths. The direct tensile tests on TRM coupons showed the high capacity of the nylon mesh in transferring stresses after cracking of the mortar. The pull-out tests highlighted that in the case of glass fiber mesh, the bond was granted by friction, while the mechanical anchorage promoted by the transversal yarns granted the bond of the nylon mesh. Finally, the single lap-shear tests showed that the adopted earth-based mortar seems to limit the performance of the strengthening.This work was supported by the Fundacao para a Ciencia e a Tecnologia [PTDC/ECM-EST/2777/2014, SFRH/BD/131006/2017, SFRH/BPD/97082/2013]

Direct Measurement of the Top Quark Mass at D0

We determine the top quark mass m_t using t-tbar pairs produced in the D0 detector by \sqrt{s} = 1.8 TeV p-pbar collisions in a 125 pb^-1 exposure at the Fermilab Tevatron. We make a two constraint fit to m_t in t-tbar -> b W^+bbar W^- final states with one W boson decaying to q-qbar and the other to e-nu or mu-nu. Likelihood fits to the data yield m_t(l+jets) = 173.3 +- 5.6 (stat) +- 5.5 (syst) GeV/c^2. When this result is combined with an analysis of events in which both W bosons decay into leptons, we obtain m_t = 172.1 +- 5.2 (stat) +- 4.9 (syst) GeV/c^2. An alternate analysis, using three constraint fits to fixed top quark masses, gives m_t(l+jets) = 176.0 +- 7.9 (stat) +- 4.8 (syst) GeV/C^2, consistent with the above result. Studies of kinematic distributions of the top quark candidates are also presented.Comment: 43 pages, 53 figures, 33 tables. RevTeX. Submitted to Phys. Rev.

Search for Electroweak Production of Single Top Quarks in ppbar Collisions

We present a search for electroweak production of single top quarks in the electron+jets and muon+jets decay channels. The measurements use ~90 pb^-1 of data from Run 1 of the Fermilab Tevatron collider, collected at 1.8 TeV with the DZero detector between 1992 and 1995. We use events that include a tagging muon, implying the presence of a b jet, to set an upper limit at the 95% confidence level on the cross section for the s-channel process ppbar->tb+X of 39 pb. The upper limit for the t-channel process ppbar->tqb+X is 58 pb.Comment: 11 pages, 2 figures. This is the published versio