4,276 research outputs found
In Situ Resistance Measurements of Strained Carbon Nanotubes
We investigate the response of multi-walled carbon nanotubes to mechanical
strain applied with an Atomic Force Microscope (AFM) probe. We find that in
some samples, changes in the contact resistance dominate the measured
resistance change. In others, strain large enough to fracture the tube can be
applied without a significant change in the contact resistance. In this case we
observe that enough force is applied to break the tube without any change in
resistance until the tube fails. We have also manipulated the ends of the
broken tube back in contact with each other, re-establishing a finite
resistance. We observe that in this broken configuration the resistance of the
sample is tunable to values 15-350 kW greater than prior to breaking.Comment: Submitted to Applied Physics Letter
Recommended from our members
A digital long pulse integrator
A prototype digital integrator with very long integration capabilities has been developed and field tested on an inductive magnetic sensor on the DIII-D Tokamak. The integrator is being developed for use on ITER with a pulse length of 1000 s, and has direct applications for other long pulse Tokamaks. Inductive magnetic sensors are routinely used on existing Tokamaks, are well understood, and are extremely robust, however, they require integration of the signal to determine the magnetic field strength. The next generation of Tokamaks, will have pulse lengths of 1000 s or longer, require integrators with drift and noise characteristics compatible with the very long pulse lengths. This paper will discuss the architecture, algorithms, and programming of the Long Pulse Integrator (LPI). Of particular interest are the noise control and the built-in offset correction techniques used in this application
Optical and Infrared Photometry of the Unusual Type Ia Supernova 2000cx
We present optical and infrared photometry of the unusual Type Ia supernova
2000cx. With the data of Li et al. (2001) and Jha (2002), this comprises the
largest dataset ever assembled for a Type Ia SN, more than 600 points in
UBVRIJHK. We confirm the finding of Li et al. regarding the unusually blue B-V
colors as SN 2000cx entered the nebular phase. Its I-band secondary hump was
extremely weak given its B-band decline rate. The V minus near infrared colors
likewise do not match loci based on other slowly declining Type Ia SNe, though
V-K is the least ``abnormal''. In several ways SN 2000cx resembles other slow
decliners, given its B-band decline rate (Delta m_15(B) = 0.93), the appearance
of Fe III lines and weakness of Si II in its pre-maximum spectrum, the V-K
colors and post-maximum V-H colors. If the distance modulus derived from
Surface Brightness Fluctuations of the host galaxy is correct, we find that the
rate of light increase prior to maximum, the characteristics of the bolometric
light curve, and the implied absolute magnitude at maximum are all consistent
with a sub-luminous object with Delta m_15(B) ~ 1.6-1.7 having a higher than
normal kinetic energy.Comment: 46 pages, 17 figures, to be published in Publications of the
Astronomical Society of the Pacifi
Recommended from our members
Plasma mass density, species mix and fluctuation diagnostics using fast Alfven wave
The authors propose to employ a fast Alfven wave interferometer and reflectometer as a tokamak diagnostic to measure the plasma mass density, D-T species mix profile, and density fluctuations. Utilize the property that the phase velocity of the fast wave propagating across the magnetic field is the Alfven speed with thermal correction, this fast wave interferometer on the DIII-D tokamak was successfully used to obtain the line integrated density. Since the position of the ion-ion hybrid cut-off in tokamaks is uniquely determined by the species mix ratio and the wave frequency, the reflectometer arrangement finds the species mix profile. The inversion method of reflectometry is discussed. The multiple chord interferometer also measures the mass density fluctuation profile
Digital play and the actualisation of the consumer imagination
In this article, the authors consider emerging consumer practices in digital virtual spaces. Building on constructions of consumer behavior as both a sense-making activity and a resource for the construction of daydreams, as well as anthropological readings of performance, the authors speculate that many performances during digital play are products of consumer fantasy. The authors develop an interpretation of the relationship between the real and the virtual that is better equipped to understand the movement between consumer daydreams and those practices actualized in the material and now also in digital virtual reality. The authors argue that digital virtual performances present opportunities for liminoid transformations through inversions, speculations, and playfulness acted out in aesthetic dramas. To illustrate, the authors consider specific examples of the theatrical productions available to consumers in digital spaces, highlighting the consumer imagination that feeds them, the performances they produce, and the potential for transformation in consumer-players
Recommended from our members
Diagnostics for the DIII-D radiative divertor
This paper reviews the design of new diagnostics and the modifications to existing diagnostics needed to carry out radiative divertor experiments in DIII-D following installation in late 1996 of a set of baffle structures that will restrict the backflow to the core plasma of neutral deuterium atoms and impurity gases. The divertor slots formed by the new baffle structures will inhibit the easy view of the divertor legs and target plates that the open divertor geometry in DIII-D currently affords. We review a basic set of diagnostics that are needed to demonstrate the reduction of divertor heat loading and radiative dissipation of energy within the divertor. This will include IR cameras, bolometry, foil bolometers, and Langmuir probes. Within the limits of available funding, we will implement a supplemental set of instruments which provide a more detailed understanding of the underlying physical processes. Many existing diagnostics require only re-aiming to provide proper coverage of the initial 23 cm long divertor plasma configuration (X- point to floor distance). Other diagnostics need extensive reconfiguration using in-vessel fiber-optic bundles or high power laser mirrors. The new divertor baffle panels provide a protective shelf for diagnostic hardware mounted underneath them, but the water cooling channels in the panels limit the permissible size of through holes and, thereby, restrict the available views of under-the- baffle diagnostics. The successful resolution of the design and implementation of these diagnostic modifications is dependent on a strong coordination between GA and its many diagnostic collaborators
Recommended from our members
A hybrid digital-analog long pulse integrator
A digital-analog integrator has been developed for use with inductive magnetic sensors in long-pulse tokamaks. Continuous compensation of input offsets is accomplished by alternating analog-to-digital convertor samples from the sensor and a dummy load, while an RC network provides passive integration between samples. Typically a sampling rate of 10 kHz is used. In operational tests on the DIII-D tokamak, digital and analog integration of tokamak data show good agreement. The output drift error during a 1200 s integration interval corresponds to a few percent of the anticipated signal for poloidal field probes in International Thermonuclear Experimental Reactor (ITER), and bench tests suggest that the error can be reduced further
Space-time versus particle-hole symmetry in quantum Enskog equations
The non-local scattering-in and -out integrals of the Enskog equation have
reversed displacements of colliding particles reflecting that the -in and -out
processes are conjugated by the space and time inversions. Generalisations of
the Enskog equation to Fermi liquid systems are hindered by a request of the
particle-hole symmetry which contradicts the reversed displacements. We resolve
this problem with the help of the optical theorem. It is found that space-time
and particle-hole symmetry can only be fulfilled simultaneously for the
Bruckner-type of internal Pauli-blocking while the Feynman-Galitskii form
allows only for particle-hole symmetry but not for space-time symmetry due to a
stimulated emission of Bosons
Yearling bulls have reduced sperm concentration and increased seminal plasma interleukin-8 after a 28-day breeding season
We hypothesized that yearling bulls selected for a 28-d breeding season would have reduced sperm concentrations and morphology, and have increased seminal plasma concentrations of pro-inflammatory cytokine interleukin-8 (IL-8). Yearling bulls were selected based on a breeding soundness examination (BSE) at approximately 415 d of age and contained at least 750 million sperm in the ejaculate, with 12 bulls randomly selected for breeding (BREEDERS) and 12 bulls not selected for breeding (NON-BREEDERS). After a 28-d breeding period, all bulls underwent a BSE. Plasma and seminal plasma were collected at each time point for analysis. Data were analysed utilizing either the MIXED or GLIMMIX procedures with repeated measures in SAS with breeding group, age and the interaction as fixed effects. Sperm concentration per ml of ejaculate was reduced (p \u3c .05) in yearling bulls used for breeding compared with those not used for breeding at the end of the breeding season. Seminal plasma IL-8 concentrations in yearling bulls used for breeding were increased (p \u3c .05) after the breeding season compared with bulls not used for breeding. Taken together, yearling bulls selected for a 28-d breeding season have reduced sperm production per ml of an ejaculate and increased inflammatory response in the seminal plasma that can lead to impaired breeding response if they are to be used for more than 30 d of breeding
Three-Dimensional Spectral Classification of Low-Metallicity Stars Using Artificial Neural Networks
We explore the application of artificial neural networks (ANNs) for the
estimation of atmospheric parameters (Teff, logg, and [Fe/H]) for Galactic F-
and G-type stars. The ANNs are fed with medium-resolution (~ 1-2 A) non
flux-calibrated spectroscopic observations. From a sample of 279 stars with
previous high-resolution determinations of metallicity, and a set of (external)
estimates of temperature and surface gravity, our ANNs are able to predict Teff
with an accuracy of ~ 135-150 K over the range 4250 <= Teff <= 6500 K, logg
with an accuracy of ~ 0.25-0.30 dex over the range 1.0 <= logg <= 5.0 dex, and
[Fe/H] with an accuracy ~ 0.15-0.20 dex over the range -4.0 <= [Fe/H] <= +0.3.
Such accuracies are competitive with the results obtained by fine analysis of
high-resolution spectra. It is noteworthy that the ANNs are able to obtain
these results without consideration of photometric information for these stars.
We have also explored the impact of the signal-to-noise ratio (S/N) on the
behavior of ANNs, and conclude that, when analyzed with ANNs trained on spectra
of commensurate S/N, it is possible to extract physical parameter estimates of
similar accuracy with stellar spectra having S/N as low as 13. Taken together,
these results indicate that the ANN approach should be of primary importance
for use in present and future large-scale spectroscopic surveys.Comment: 51 pages, 11 eps figures, uses aastex; to appear in Ap
- …