Agglomeration of celecoxib by quasi emulsion solvent diffusion method: effect of stabilizer

Purpose: The quasi-emulsion solvent diffusion (QESD) has evolved into an effective technique to manufacture agglomerates of API crystals. Although, the proposed technique showed benefits, such as cost effectiveness, that is considerably sensitive to the choice of a stabilizer, which agonizes from a absence of systemic understanding in this field. In the present study, the combination of different solvents and stabilizers were compared to investigate any connections between the solvents and stabilizers. Methods: Agglomerates of celecoxib were prepared by QESD method using four different stabilizers (Tween 80, HPMC, PVP and SLS) and three different solvents (methyl acetate, ethyl acetate and isopropyl acetate). The solid state of obtained particles was investigated by differential scanning calorimetry (DSC) and Fourier transform infrared (FT-IR) spectroscopy. The agglomerated were also evaluated in term of production yield, distribution of particles and dissolution behavior. Results: The results showed that the effectiveness of stabilizer in terms of particle size and particle size distribution is specific to each solvent candidate. A stabilizer with a lower HLB value is preferred which actually increased its effectiveness with the solvent candidates with higher lipophilicity. HPMC appeared to be the most versatile stabilizer because it showed a better stabilizing effect compared to other stabilizers in all solvents used. Conclusion: This study demonstrated that the efficiency of stabilizers in forming the celecoxib agglomerates by QESD was influenced by the HLB of the stabilizer and lipophilicity of the solvents

Evidence for the existence of powder sub-populations in micronized materials : Aerodynamic size-fractions of aerosolized powders possess distinct physicochemical properties

This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.Purpose: To investigate the agglomeration behaviour of the fine ( 12.8 µm) particle fractions of salmeterol xinafoate (SX) and fluticasone propionate (FP) by isolating aerodynamic size fractions and characterising their physicochemical and re-dispersal properties. Methods: Aerodynamic fractionation was conducted using the Next Generation Impactor (NGI). Re-crystallized control particles, unfractionated and fractionated materials were characterized for particle size, morphology, crystallinity and surface energy. Re-dispersal of the particles was assessed using dry dispersion laser diffraction and NGI analysis. Results: Aerosolized SX and FP particles deposited in the NGI as agglomerates of consistent particle/agglomerate morphology. SX particles depositing on Stages 3 and 5 had higher total surface energy than unfractionated SX, with Stage 5 particles showing the greatest surface energy heterogeneity. FP fractions had comparable surface energy distributions and bulk crystallinity but differences in surface chemistry. SX fractions demonstrated higher bulk disorder than unfractionated and re-crystallized particles. Upon aerosolization, the fractions differed in their intrinsic emission and dispersion into a fine particle fraction (< 5.0 µm). Conclusions: Micronized powders consisted of sub-populations of particles displaying distinct physicochemical and powder dispersal properties compared to the unfractionated bulk material. This may have implications for the efficiency of inhaled drug deliveryPeer reviewe

German National Consensus Recommendations on Nutrition and Lifestyle in Pregnancy by the ‘Healthy Start - Young Family Network’

Diet and physical activity before and during pregnancy affect short- andlong-term health of mother and child. The energy needs at the end ofpregnancy increase only by about 10% compared to nonpregnant women. Anexcessive energy intake is undesirable since maternal overweight andexcessive weight gain can increase the risks for a high birth weight andlater child overweight and diabetes. Maternal weight at the beginning ofpregnancy is especially important for pregnancy outcome and childhealth. Women should strive to achieve normal weight already beforepregnancy. Regular physical activity can contribute to a healthy weightand to the health of pregnant women. The need for certain nutrientsincreases more than energy requirements. Before and during pregnancy,foods with a high content of essential nutrients should bepreferentially selected. Supplements should include folic acid andiodine, iron (in case of suboptimal iron stores), the omega-3 fatty aciddocosahexaenoic acid (in case of infrequent consumption of ocean fish)and vitamin D (in case of decreased sun exposure and decreasedendogenous vitamin D synthesis). Pregnant women should not smoke and notstay in rooms where others smoke or have smoked before (passivesmoking). Alcohol consumption should be avoided, since alcohol can harmunborn children

Three new hydrochlorothiazide cocrystals: Structural analyses and solubility studies

YesHydrochlorothiazide (HCT) is a diuretic BCS class IV drug with poor aqueous solubility and low permeability leading to poor oral absorption. The present work explores the cocrystallization technique to enhance the aqueous solubility of HCT. Three new cocrystals of HCT with water soluble coformers phenazine (PHEN), 4-dimethylaminopyridine (DMAP) and picolinamide (PICA) were prepared successfully by solution crystallization method and characterized by single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), fourier transform –infraredspectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Structural characterization revealed that the cocrystals with PHEN, DMAP and PICA exists in P21/n, P21/c and P21/n space groups, respectively. The improved solubility of HCT-DMAP (4 fold) and HCT-PHEN (1.4 fold) cocrystals whereas decreased solubility of HCT-PICA (0.5 fold) as compared to the free drug were determined after 4 h in phosphate buffer, pH 7.4, at 25 °C by using shaking flask method. HCT-DMAP showed a significant increase in solubility than all previously reported cocrystals of HCT suggest the role of a coformer. The study demonstrates that the selection of coformer could have pronounced impact on the physicochemical properties of HCT and cocrystallization can be a promising approach to improve aqueous solubility of drugs

German National Consensus Recommendations on Nutrition and Lifestyle in Pregnancy by the ‘Healthy Start - Young Family Network’

Diet and physical activity before and during pregnancy affect short- andlong-term health of mother and child. The energy needs at the end ofpregnancy increase only by about 10% compared to nonpregnant women. Anexcessive energy intake is undesirable since maternal overweight andexcessive weight gain can increase the risks for a high birth weight andlater child overweight and diabetes. Maternal weight at the beginning ofpregnancy is especially important for pregnancy outcome and childhealth. Women should strive to achieve normal weight already beforepregnancy. Regular physical activity can contribute to a healthy weightand to the health of pregnant women. The need for certain nutrientsincreases more than energy requirements. Before and during pregnancy,foods with a high content of essential nutrients should bepreferentially selected. Supplements should include folic acid andiodine, iron (in case of suboptimal iron stores), the omega-3 fatty aciddocosahexaenoic acid (in case of infrequent consumption of ocean fish)and vitamin D (in case of decreased sun exposure and decreasedendogenous vitamin D synthesis). Pregnant women should not smoke and notstay in rooms where others smoke or have smoked before (passivesmoking). Alcohol consumption should be avoided, since alcohol can harmunborn children

Sferična kristalizacija zdravilnih učinkovin

Spherical crystallization of drugs is the process of obtaining larger particles by agglomeration during crystallization. The most common techniques used to obtain such particles are spherical agglomeration and quasi-emulsion solvent diffusion. Ammonia diffusion systems and crystallo-co-agglomeration are extensions of these techniques. By controlling process parameters during crystallization, such as temperature, stirring rate, type and amount of solvents, or excipient selection, it is possible to control the formation of agglomerates and obtain spherical particles of the desired size, porosity, or hardness. Researchers have reported that the particles produced have improved micromeritic, physical, and mechanical properties, which make them suitable for direct compression. In some cases, when additional excipients are incorporated during spherical crystallization, biopharmaceutical parameters including the bioavailability of drugs can also be tailored.Sferična kristalizacija je postopek izdelave večjih delcev z aglomeracijo manjših med samo kristalizacijo. Najpogosteje uporabljeni tehniki za izdelavo takšnih delcev sta sferična aglomeracija in kvaziemulzija z difuzijo topila. Sistem z difuzijo amoniaka in kristalo-ko-aglomeracija sta razširitvi teh dveh metod. Z nadzorovanjem procesnih parametrov med kristalizacijo, kot sta temperatura in hitrost mešanja, z izbiro lastnosti in množine topil ter z izbiro pomožnih snovi, lahko vplivamo na nastanek aglomeratov in izdelamo sferične delce želenih velikosti, primerne poroznosti ali trdote. Raziskovalci poročajo, da imajo izdelani delci izboljšane pretočne lastnosti, izboljšane druge fizikalne in mehanske lastnosti zaradi česar so primerni za direktno tabletiranje. V nekaterih primerih lahko ob vgradnji ustreznih pomožnih snovi, ki jih dodamo med procesom sferične kristalizacije, izboljšamo tudi biofarmacevtske lastnosti zdravilnih učinkovin vključno s povečanjem biološke uporabnosti