Fluid dynamical description of relativistic nuclear collisions

On the basis of both a conventional relativistic nuclear fluid dynamic model and a two fluid generalization that takes into account the interpenetration of the target and projectile upon contact, collisions between heavy nuclei moving at relativistic speeds are calculated. This is done by solving the relevant equations of motion numerically in three spatial dimensions by use of particle in cell finite difference computing techniques. The effect of incorporating a density isomer, or quasistable state, in the nuclear equation of state at three times normal nuclear density, and the effect of doubling the nuclear compressibility coefficient are studied. For the reaction 20Ne + 238U at a laboratory bombarding energy per nucleon of 393 MeV, the calculated distributions in energy and angle of outgoing charged particles are compared with recent experimental data both integrated over all impact parameters and for nearly central collisions

Nanoscale gold pillars strengthened through dislocation starvation

It has been known for more than half a century that crystals can be made stronger by introducing defects into them, i.e., by strain-hardening. As the number of defects increases, their movement and multiplication is impeded, thus strengthening the material. In the present work we show hardening by dislocation starvation, a fundamentally different strengthening mechanism based on the elimination of defects from the crystal. We demonstrate that submicrometer sized gold crystals can be 50 times stronger than their bulk counterparts due to the elimination of defects from the crystal in the course of deformation

Saturated system behavior - Surface boiling and controlled blowdown Final report

Surface and static pressure effects on nucleate pool boiling, and depressurization response of saturated syste

Feasibility Study of OFDM-MFSK Modulation Scheme for Smart Metering Technology

The Orthogonal Frequency Division Multiplexing based M-ary Frequency Shift Keying (OFDM-MFSK) is a noncoherent modulation scheme which merges MFSK with the OFDM waveform. It is designed to improve the receiver sensitivity in the hard environments where channel estimation is very difficult to perform. In this paper, the OFDM-MFSK is suggested for the smart metering technology and its performance is measured and compared with the ordinary OFDM-BPSK. Our results show that, depending on the MFSK size value (M), the Packet Error Rate (PER) has dramatically improved for OFDM-MFSK. Additionally, the adaptive OFDM-MFSK, which selects the best M value that gives the minimum PER and higher throughput for each Smart Meter (SM), has better coverage than OFDM-BPSK. Although its throughput and capacity are lower than OFDMBPSK, the connected SMs per sector are higher. Based on the smart metering technology requirements which imply the need for high coverage and low amount of data exchanged between the network and the SMs, The OFDM-MFSK can be efficiently used in this technology.Comment: 6 pages, 11 figures, ISGT Europe 201

A Link Quality Model for Generalised Frequency Division Multiplexing

5G systems aim to achieve extremely high data rates, low end-to-end latency and ultra-low power consumption. Recently, there has been considerable interest in the design of 5G physical layer waveforms. One important candidate is Generalised Frequency Division Multiplexing (GFDM). In order to evaluate its performance and features, system-level studies should be undertaken in a range of scenarios. These studies, however, require highly complex computations if they are performed using bit-level simulators. In this paper, the Mutual Information (MI) based link quality model (PHY abstraction), which has been regularly used to implement system-level studies for Orthogonal Frequency Division Multiplexing (OFDM), is applied to GFDM. The performance of the GFDM waveform using this model and the bit-level simulation performance is measured using different channel types. Moreover, a system-level study for a GFDM based LTE-A system in a realistic scenario, using both a bit-level simulator and this abstraction model, has been studied and compared. The results reveal the accuracy of this model using realistic channel data. Based on these results, the PHY abstraction technique can be applied to evaluate the performance of GFDM based systems in an effective manner with low complexity. The maximum difference in the Packet Error Rate (PER) and throughput results in the abstraction case compared to bit-level simulation does not exceed 4% whilst offering a simulation time saving reduction of around 62,000 times.Comment: 5 pages, 8 figures, accepted in VTC- spring 201

Nuclear Ground-State Masses and Deformations

We tabulate the atomic mass excesses and nuclear ground-state deformations of 8979 nuclei ranging from $^{16}$O to $A=339$. The calculations are based on the finite-range droplet macroscopic model and the folded-Yukawa single-particle microscopic model. Relative to our 1981 mass table the current results are obtained with an improved macroscopic model, an improved pairing model with a new form for the effective-interaction pairing gap, and minimization of the ground-state energy with respect to additional shape degrees of freedom. The values of only 9 constants are determined directly from a least-squares adjustment to the ground-state masses of 1654 nuclei ranging from $^{16}$O to $^{263}$106 and to 28 fission-barrier heights. The error of the mass model is 0.669~MeV for the entire region of nuclei considered, but is only 0.448~MeV for the region above $N=65$.Comment: 50 pages plus 20 PostScript figures and 160-page table obtainable by anonymous ftp from t2.lanl.gov in directory masses, LA-UR-93-308

Shear bands and cracking of metallic glass plates in bending

The thickness dependence of yielding and fracture of metallic glass plates subjected to bending is considered in terms of the shear band processes responsible for these properties. We argue that the shear band spacing (and length) scales with the thickness of the plate because of strain relaxation in the vicinity of the shear band at the surface. This is consistent with recent measurements of shear band spacing versus sample size. We also argue that the shear displacements in the shear band scale with the shear band length and plate thickness, thus causing cracks to be initiated in thicker plates at smaller bending strains. This leads to fracture bending strains that decrease markedly with increasing plate thickness, consistent with recent experiments. These results suggest that amorphous metals in the form of foams might have superior ductility and toughness