53,926 research outputs found
Heat generation in aircraft tires under free rolling conditions
A method was developed for calculating the internal temperature distribution in an aircraft tire while free rolling under load. The method uses an approximate stress analysis of each point in the tire as it rolls through the contact patch, and from this stress change the mechanical work done on each volume element may be obtained and converted into a heat release rate through a knowledge of material characteristics. The tire cross-section is then considered as a body with internal heat generation, and the diffusion equation is solved numerically with appropriate boundary conditions of the wheel and runway surface. Comparison with data obtained with buried thermocouples in tires shows good agreement
A frequency-selective feedback model of auditory efferent suppression and its implications for the recognition of speech in noise
The potential contribution of the peripheral auditory efferent system to our understanding of speech in a background of competing noise was studied using a computer model of the auditory periphery and assessed using an automatic speech recognition system. A previous study had shown that a fixed efferent attenuation applied to all channels of a multi-channel model could improve the recognition of connected digit triplets in noise [G. J. Brown, R. T. Ferry, and R. Meddis, J. Acoust. Soc. Am. 127, 943?954 (2010)]. In the current study an anatomically justified feedback loop was used to automatically regulate separate attenuation values for each auditory channel. This arrangement resulted in a further enhancement of speech recognition over fixed-attenuation conditions. Comparisons between multi-talker babble and pink noise interference conditions suggest that the benefit originates from the model?s ability to modify the amount of suppression in each channel separately according to the spectral shape of the interfering sounds
A comparison of some static and dynamic mechanical properties of 18 x 5.5 and 49 x 17 type 7 aircraft tires as measured by three test facilities
The properties were measured during static, slow rolling, and high-speed tests, and comparisons were made between data as acquired on indoor drum dynamometers and on an outdoor test track. In addition, mechanical properties were also obtained from scale model tires and compared with corresponding properties from full-size tires. While the tests covered a wide range of tire properties, results seem to indicate that speed effects are not large, scale models may be used for obtaining some but not all tire properties, and that predictive equations developed in NASA TR R-64 are still useful in estimating most mechanical properties
Effect of alloy chemistry and exposure conditions on the oxidation of titanium
Multiwall is a new thermal protection system concept for advanced space transportation vehicles. The system consists of discrete panels made up of multiple layers of foil gage metal. Titanium is the proposed candidate metal for multiwall panels in the reentry temperature range up to 675 C. Oxidation and embrittlement are the principal concerns related to the use of Ti in heat shield applications. The results of a broad study on the oxidation kinetics of several titanium alloys subjected to different exposure conditions are described. The alloys include commercially pure titanium, Ti-6Al-4V, and Ti-6Al-2Sn-4Zr-2Mo. Oxidation studies were performed on these alloys exposed at 704 C in 5-760 torr air pressure and 0 to 50% relative humidity. The resulting weight gains were correlated with oxide thickness and substrate contamination. The contamination depth and weight gains due to solid solutioning were obtained from microhardness depth profiles and hardness versus weight percent oxygen calibration data
Definition of Tire Properties Required for Landing System Analysis
The data bank constructed provided two basic advantages for the user of aircraft tire information. First, computerization of the data bank allowed mechanical property data to be stored, corrected, updated, and revised quickly and easily as more reliable tests and measurements were carried out. Secondly, the format of the book which can be printed from the computerized data bank can be easily adjusted to suit the needs of the users without the great expense normally associated with reprinting and editing books set by ordinary typography
Use of thermal infrared and colour infrared imagery to detect crop moisture stress
The author has identified the following significant results. In the presence of variable plant cover (primarily percent cover) and variable available water content, the remotely sensed apparent temperatures correlate closely with plant cover and poorly with soil water. To the extent that plant cover is not systematically related to available soil water, available water in the root zone values may not be reliably predicted from the thermal infrared data. On the other hand, if plant cover is uniform and the soil surface is shown in a minor way, the thermal data indicate plant stress and consequently available water in the soil profile
The first definitive Middle Jurassic atoposaurid (Crocodylomorpha, Neosuchia), and a discussion on the genus Theriosuchus
Atoposaurids were a clade of semiaquatic crocodyliforms known from the Late Jurassic to the latest Cretaceous. Tentative remains from Europe, Morocco, and Madagascar may extend their range into the Middle Jurassic. Here we report the first unambiguous Middle Jurassic (late Bajocian–Bathonian) atoposaurid: an anterior dentary from the Isle of Skye, Scotland, UK. A comprehensive review of atoposaurid specimens demonstrates that this dentary can be referred to Theriosuchus based on several derived characters, and differs from the five previously recognized species within this genus. Despite several diagnostic features, we conservatively refer it to Theriosuchus sp., pending the discovery of more complete material. As the oldest known definitively diagnostic atoposaurid, this discovery indicates that the oldest members of this group were small-bodied, had heterodont dentition, and were most likely widespread components of European faunas. Our review of mandibular and dental features in atoposaurids not only allows us to present a revised diagnosis of Theriosuchus, but also reveals a great amount of variability within this genus, and indicates that there are currently five valid species that can be differentiated by unique combinations of dental characteristics. This variability can be included in future broad-scale cladistics analyses of atoposaurids and closely related crocodyliforms, which promise to help untangle the complicated taxonomy and evolutionary history of Atoposauridae
Calculations of Energy Losses due to Atomic Processes in Tokamaks with Applications to the ITER Divertor
Reduction of the peak heat loads on the plasma facing components is essential
for the success of the next generation of high fusion power tokamaks such as
the International Thermonuclear Experimental Reactor (ITER) 1 . Many present
concepts for accomplishing this involve the use of atomic processes to transfer
the heat from the plasma to the main chamber and divertor chamber walls and
much of the experimental and theoretical physics research in the fusion program
is directed toward this issue. The results of these experiments and
calculations are the result of a complex interplay of many processes. In order
to identify the key features of these experiments and calculations and the
relative role of the primary atomic processes, simple quasi-analytic models and
the latest atomic physics rate coefficients and cross sections have been used
to assess the relative roles of central radiation losses through
bremsstrahlung, impurity radiation losses from the plasma edge, charge exchange
and hydrogen radiation losses from the scrape-off layer and divertor plasma and
impurity radiation losses from the divertor plasma. This anaysis indicates that
bremsstrahlung from the plasma center and impurity radiation from the plasma
edge and divertor plasma can each play a significant role in reducing the power
to the divertor plates, and identifies many of the factors which determine the
relative role of each process. For instance, for radiation losses in the
divertor to be large enough to radiate the power in the divertor for high power
experiments, a neutral fraction of 10-3 to 10-2 and an impurity recycling rate
of netrecycle of ~ 10^16 s m^-3 will be required in the divertor.Comment: Preprint for the 1994 APSDPP meeting, uuencoded and gzipped
postscript with 22 figures, 40 pages
- …