OT 060420: A Seemingly Optical Transient Recorded by All-Sky Cameras

We report on a ~5th magnitude flash detected for approximately 10 minutes by two CONCAM all-sky cameras located in Cerro Pachon - Chile and La Palma - Spain. A third all-sky camera, located in Cerro Paranal - Chile did not detect the flash, and therefore the authors of this paper suggest that the flash was a series of cosmic-ray hits, meteors, or satellite glints. Another proposed hypothesis is that the flash was an astronomical transient with variable luminosity. In this paper we discuss bright optical transient detection using fish-eye all-sky monitors, analyze the apparently false-positive optical transient, and propose possible causes to false optical transient detection in all-sky cameras.Comment: 7 figures, 3 tables, accepted PAS

Paradoxical popups: Why are they hard to catch?

Even professional baseball players occasionally find it difficult to gracefully approach seemingly routine pop-ups. This paper describes a set of towering pop-ups with trajectories that exhibit cusps and loops near the apex. For a normal fly ball, the horizontal velocity is continuously decreasing due to drag caused by air resistance. But for pop-ups, the Magnus force (the force due to the ball spinning in a moving airflow) is larger than the drag force. In these cases the horizontal velocity decreases in the beginning, like a normal fly ball, but after the apex, the Magnus force accelerates the horizontal motion. We refer to this class of pop-ups as paradoxical because they appear to misinform the typically robust optical control strategies used by fielders and lead to systematic vacillation in running paths, especially when a trajectory terminates near the fielder. In short, some of the dancing around when infielders pursue pop-ups can be well explained as a combination of bizarre trajectories and misguidance by the normally reliable optical control strategy, rather than apparent fielder error. Former major league infielders confirm that our model agrees with their experiences.Comment: 28 pages, 10 figures, sumitted to American Journal of Physic

Molecular and cellular mechanisms underlying the evolution of form and function in the amniote jaw.

The amniote jaw complex is a remarkable amalgamation of derivatives from distinct embryonic cell lineages. During development, the cells in these lineages experience concerted movements, migrations, and signaling interactions that take them from their initial origins to their final destinations and imbue their derivatives with aspects of form including their axial orientation, anatomical identity, size, and shape. Perturbations along the way can produce defects and disease, but also generate the variation necessary for jaw evolution and adaptation. We focus on molecular and cellular mechanisms that regulate form in the amniote jaw complex, and that enable structural and functional integration. Special emphasis is placed on the role of cranial neural crest mesenchyme (NCM) during the species-specific patterning of bone, cartilage, tendon, muscle, and other jaw tissues. We also address the effects of biomechanical forces during jaw development and discuss ways in which certain molecular and cellular responses add adaptive and evolutionary plasticity to jaw morphology. Overall, we highlight how variation in molecular and cellular programs can promote the phenomenal diversity and functional morphology achieved during amniote jaw evolution or lead to the range of jaw defects and disease that affect the human condition

An argument against the focus on Community Resilience in Public Health

Background - It has been suggested that Public Health professionals focus on community resilience in tackling chronic problems, such as poverty and deprivation; is this approach useful? Discussion - Resilience is always i) of something ii) to something iii) to an endpoint, as in i) a rubber ball, ii) to a blunt force, iii) to its original shape. “Community resilience” might be: of a neighbourhood, to a flu pandemic, with the endpoint, to return to normality. In these two examples, the endpoint is as-you-were. This is unsuitable for some examples of resilience. A child that is resilient to an abusive upbringing has an endpoint of living a happy life despite that upbringing: this is an as-you-should-be endpoint. Similarly, a chronically deprived community cannot have the endpoint of returning to chronic deprivation: so what is its endpoint? Roughly, it is an as-you-should-be endpoint: to provide an environment for inhabitants to live well. Thus resilient communities will be those that do this in the face of challenges. How can they be identified? One method uses statistical outliers, neighbourhoods that do better than would be expected on a range of outcomes given a range of stressors. This method tells us that a neighbourhood is resilient but not why it is. In response, a number of researchers have attributed characteristics to resilient communities; however, these generally fail to distinguish characteristics of a good community from those of a resilient one. Making this distinction is difficult and we have not seen it successfully done; more importantly, it is arguably unnecessary. There already exist approaches in Public Health to assessing and developing communities faced with chronic problems, typically tied to notions such as Social Capital. Communityresilience to chronic problems, if it makes sense at all, is likely to be a property that emerges from the various assets in a community such as human capital, built capital and natural capital. Summary - Public Health professionals working with deprived neighbourhoods would be better to focus on what neighbourhoods have or could develop as social capital for living well, rather than on the vague and tangential notion of community resilience.</p

The diffusion of policy in contexts of practice : flexible delivery in Australian vocational education and training

Significant changes have occurred over the last decade within the Australian Vocational Education and Training (VET) system. Not least amongst these has been a shift from a predominantly traditional face-to-face classroom model of programme delivery to more flexible models informed by the needs of clients. To lead this revolution, in 1991 the Australian Commonwealth and State Ministers for Training established the Flexible Delivery Working Party. A series of reports followed that sought to develop a policy framework, including a definition of flexible delivery, and its principles and characteristics. Despite these efforts, project funding and national staff development initiatives, several difficulties have been experienced in the &lsquo;take-up&rsquo; of flexible delivery; problems that we argue are related to how the dissemination of innovative practice is conceived. Specifically, the literature and research on the diffusion of innovations points to the efficacy of informal social networks &lsquo;in which individuals adopt the new idea as a result of talking with other individuals who have already adopted it&rsquo; (Valente, 1995, p. ix). Following a discussion of these issues, the article concludes by arguing the need for research of innovative practice transfer within VET in Australia, using qualitative case study in order to develop an in-depth and rich description of the process, and facilitate greater understanding of how it works in practice

Thin Polymer Brush Decouples Biomaterial's Micro-/Nano-Topology and Stem Cell Adhesion

Surface morphology and chemistry of polymers used as biomaterials, such as tissue engineering scaffolds, have a strong influence on the adhesion and behavior of human mesenchymal stem cells. Here we studied semicrystalline poly(ε-caprolactone) (PCL) substrate scaffolds, which exhibited a variation of surface morphologies and roughness originating from different spherulitic superstructures. Different substrates were obtained by varying the parameters of the thermal processing, i.e. crystallization conditions. The cells attached to these polymer substrates adopted different morphologies responding to variations in spherulite density and size. In order to decouple substrate topology effects on the cells, sub-100 nm bio-adhesive polymer brush coatings of oligo(ethylene glycol) methacrylates were grafted from PCL and functionalized with fibronectin. On surfaces featuring different surface textures, dense and sub-100 nm thick brush coatings determined the response of cells, irrespective to the underlying topology. Thus, polymer brushes decouple substrate micro-/nano-topology and the adhesion of stem cells

Carbon sequestration potential and physicochemical properties differ between wildfire charcoals and slow-pyrolysis biochars

Pyrogenic carbon (PyC), produced naturally (wildfire charcoal) and anthropogenically (biochar), is extensively studied due to its importance in several disciplines, including global climate dynamics, agronomy and paleosciences. Charcoal and biochar are commonly used as analogues for each other to infer respective carbon sequestration potentials, production conditions, and environmental roles and fates. The direct comparability of corresponding natural and anthropogenic PyC, however, has never been tested. Here we compared key physicochemical properties (elemental composition, δ13C and PAHs signatures, chemical recalcitrance, density and porosity) and carbon sequestration potentials of PyC materials formed from two identical feedstocks (pine forest floor and wood) under wildfire charring- and slow-pyrolysis conditions. Wildfire charcoals were formed under higher maximum temperatures and oxygen availabilities, but much shorter heating durations than slow-pyrolysis biochars, resulting in differing physicochemical properties. These differences are particularly relevant regarding their respective roles as carbon sinks, as even the wildfire charcoals formed at the highest temperatures had lower carbon sequestration potentials than most slow-pyrolysis biochars. Our results challenge the common notion that natural charcoal and biochar are well suited as proxies for each other, and suggest that biochar’s environmental residence time may be underestimated when based on natural charcoal as a proxy, and vice versa

Navigating to new frontiers in behavioral neuroscience: traditional neuropsychological tests predict human performance on a rodent-inspired radial-arm maze

We constructed an 11-arm, walk-through, human radial-arm maze (HRAM) as a translational instrument to compare existing methodology in the areas of rodent and human learning and memory research. The HRAM, utilized here, serves as an intermediary test between the classic rat radial-arm maze (RAM) and standard human neuropsychological and cognitive tests. We show that the HRAM is a useful instrument to examine working memory ability, explore the relationships between rodent and human memory and cognition models, and evaluate factors that contribute to human navigational ability. One-hundred-and-fifty-seven participants were tested on the HRAM, and scores were compared to performance on a standard cognitive battery focused on episodic memory, working memory capacity, and visuospatial ability. We found that errors on the HRAM increased as working memory demand became elevated, similar to the pattern typically seen in rodents, and that for this task, performance appears similar to Miller's classic description of a processing-inclusive human working memory capacity of 7 ± 2 items. Regression analysis revealed that measures of working memory capacity and visuospatial ability accounted for a large proportion of variance in HRAM scores, while measures of episodic memory and general intelligence did not serve as significant predictors of HRAM performance. We present the HRAM as a novel instrument for measuring navigational behavior in humans, as is traditionally done in basic science studies evaluating rodent learning and memory, thus providing a useful tool to help connect and translate between human and rodent models of cognitive functioning

Understanding the Catalytic Active Sites of Crystalline CoSbxOy for Electrochemical Chlorine Evolution

The chlorine evolution reaction (CER) is a key reaction in electrochemical oxidation (EO) of water treatment. Conventional anodes based on platinum group metals can be prohibitively expensive, which hinders further application of EO systems. Crystalline cobalt antimonate (CoSbxOy) was recently identified as a promising alternative to conventional anodes due to its high catalytic activity and stability in acidic media. However, its catalytic sites and reaction mechanism have not yet been elucidated. This study sheds light on the catalytically active sites in crystalline CoSbxOy anodes by using scanning electrochemical microscopy to compare the CER catalytic activities of a series of anode samples with different bulk Sb/Co ratios (from 1.43 to 2.80). The results showed that Sb sites served as more active catalytic sites than the Co sites. The varied Sb/Co ratios were also linked with slightly different electronic states of each element, leading to different CER selectivities in 30 mM chloride solutions under 10 mA cm–2 current density. The high activity of Sb sites toward the CER highlighted the significance of the electronic polarization that changed the oxidation states of Co and Sb

The “Grey Zone” cold air outbreak global model intercomparison: A cross evaluation using large-eddy simulations

A stratocumulus-to-cumulus transition as observed in a cold air outbreak over the North Atlantic Ocean is compared in global climate and numerical weather prediction models and a large-eddy simulation model as part of the Working Group on Numerical Experimentation “Grey Zone” project. The focus of the project is to investigate to what degree current convection and boundary layer parameterizations behave in a scale-adaptive manner in situations where the model resolution approaches the scale of convection. Global model simulations were performed at a wide range of resolutions, with convective parameterizations turned on and off. The models successfully simulate the transition between the observed boundary layer structures, from a well-mixed stratocumulus to a deeper, partly decoupled cumulus boundary layer. There are indications that surface fluxes are generally underestimated. The amount of both cloud liquid water and cloud ice, and likely precipitation, are under-predicted, suggesting deficiencies in the strength of vertical mixing in shear-dominated boundary layers. But also regulation by precipitation and mixed-phase cloud microphysical processes play an important role in the case. With convection parameterizations switched on, the profiles of atmospheric liquid water and cloud ice are essentially resolution-insensitive. This, however, does not imply that convection parameterizations are scale-aware. Even at the highest resolutions considered here, simulations with convective parameterizations do not converge toward the results of convection-off experiments. Convection and boundary layer parameterizations strongly interact, suggesting the need for a unified treatment of convective and turbulent mixing when addressing scale-adaptivity