Performance of ZrB2–Cu composite as an EDM electrode

The low wear resistance of electrodes like Cu, Cu alloys and graphite is a major problem for electrical discharge machining (EDM) operation. Here an attempt has been made to develop a metal matrix composite (ZrB2–Cu) to get an optimum combination of wear resistance, electrical and thermal conductivity. The ZrB2–Cu composite have been developed by adding different amounts of Cu and tested as a tool material at different process parameters of EDM during machining of mild steel. The ZrB2–40 wt.% Cu composite shows more metal removal rate (MRR) with less tool removal rate (TRR) than commonly used Cu tool. But the diameteral overcut and average surface roughness are found to be lesser in case of Cu tool than composite tool. The tools and workpiece surfaces are analyzed by scanning electron microscope (SEM)/EDS and XRD technique

Controlling the shape and topology of two-component colloidal membranes

Changes in the geometry and topology of self-assembled membranes underlie diverse processes across cellular biology and engineering. Similar to lipid bilayers, monolayer colloidal membranes have in-plane fluid-like dynamics and out-of-plane bending elasticity. Their open edges and micron length scale provide a tractable system to study the equilibrium energetics and dynamic pathways of membrane assembly and reconfiguration. Here, we find that doping colloidal membranes with short miscible rods transforms disk-shaped membranes into saddle-shaped surfaces with complex edge structures. The saddle-shaped membranes are well-approximated by Enneper's minimal surfaces. Theoretical modeling demonstrates that their formation is driven by increasing positive Gaussian modulus, which in turn is controlled by the fraction of short rods. Further coalescence of saddle-shaped surfaces leads to diverse topologically distinct structures, including catenoids, tri-noids, four-noids, and higher order structures. At long time scales, we observe the formation of a system-spanning, sponge-like phase. The unique features of colloidal membranes reveal the topological transformations that accompany coalescence pathways in real time. We enhance the functionality of these membranes by making their shape responsive to external stimuli. Our results demonstrate a novel pathway towards control of thin elastic sheets' shape and topology -- a pathway driven by the emergent elasticity induced by compositional heterogeneity.Comment: 15 pages, 9 figure

Polarization Modulation in Ferroelectric Organic Field-Effect Transistors

The polarization modulation effect of the gate dielectric on the performance of metal-oxide-semiconductor field-effect transistors has been investigated for more than a decade. However, there are no comparable studies in the area of organic field-effect transistors (FETs) using polymer ferroelectric dielectrics, where the effect of polarization rotation by 90 is examined on the FET characteristics. We demonstrate the effect of polarization rotation in a relaxor ferroelectric dielectric, poly(vinylidene fluoride trifluorethylene) (PVDF-TrFE), on the performance of small-molecule-based organic FETs. The subthreshold swing and other transistor parameters in organic FETs can be controlled in a reversible fashion by switching the polarization direction in the PVDF-TrFE layer. X-ray diffraction and electron microscopy images from PVDF-TrFE reveal changes in the ferroelectric phase and domain size, respectively, upon rotating the external electric field by 90. The structural changes corroborate density-functional-theoretical studies of an oligomer of the ferroelectric molecule in the presence of an applied electric field. The strategies enumerated here for polarization orientation of the polymer ferroelectric dielectric are applicable for a wide range of polymeric and organic transistors

Orbital interactions and chemical reactivity of metal particles and metal surfaces

A review is presented with 101 refs. on chem. bonding to metal surfaces and small metal particles demonstrating the power of symmetry concepts to predict changes in chem. bonding. Ab-initio calcns. of chemisorption to small particles, as well as semiempirical extended Hueckel calcns. applied to the study of the reactivity of metal slabs are reviewed. On small metal particles, classical notions of electron promotion and hybridization are found to apply. The surroundings of a metal atom (ligands in complexes, other metal atoms at surfaces), affect bonding and reactivity through the prehybridization they induce. A factor specific for large particles and surfaces is the required localization of electrons on the atoms involved in the metal surface bond. At the surface, the bond energy is found to relate to the grou8p orbital local d. of states at the Fermi level. The use of this concept is extensively discussed and illustrated for chemisorption of CO and dissocn. of NO on metal surfaces. A discussion is given of the current decompn. schemes of bond energies and related concepts (exchange (Pauli)-repulsion, polarization, charge transfer). The role of non-orthogonality of fragment orbitals and of kinetic and potential energy for Pauli repulsion and (orbital) polarization is analyzed. Numerous examples are discussed to demonstrate the impact of those concepts on chem. bonding theor

Interpenetrated Magnesium–Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test

Magnesium and calcium phosphates composites are promising biomaterials to create biodegradable load-bearing implants for bone regeneration. The present investigation is focused on the design of an interpenetrated magnesium–tricalcium phosphate (Mg–TCP) composite and its evaluation under immersion test. In the study, TCP porous preforms were fabricated by robocasting to have a prefect control of porosity and pore size and later infiltrated with pure commercial Mg through current-assisted metal infiltration (CAMI) technique. The microstructure, composition, distribution of phases and degradation of the composite under physiological simulated conditions were analysed by scanning electron microscopy, elemental chemical analysis and X-ray diffraction. The results revealed that robocast TCP preforms were full infiltrated by magnesium through CAMI, even small pores below 2 lm have been filled with Mg, giving to the composite a good interpenetration. The degradation rate of the Mg–TCP composite displays lower value compared to the one of pure Mg during the first 24 h of immersion test.Magnesium and calcium phosphates composites are promising biomaterials to create biodegradable load-bearing implants for bone regeneration. The present investigation is focused on the design of an interpenetrated magnesium–tricalcium phosphate (Mg–TCP) composite and its evaluation under immersion test. In the study, TCP porous preforms were fabricated by robocasting to have a prefect control of porosity and pore size and later infiltrated with pure commercial Mg through current-assisted metal infiltration (CAMI) technique. The microstructure, composition, distribution of phases and degradation of the composite under physiological simulated conditions were analysed by scanning electron microscopy, elemental chemical analysis and X-ray diffraction. The results revealed that robocast TCP preforms were full infiltrated by magnesium through CAMI, even small pores below 2 lm have been filled with Mg, giving to the composite a good interpenetration. The degradation rate of the Mg–TCP composite displays lower value compared to the one of pure Mg during the first 24 h of immersion test

Distribution of relaxation time in solution-processed polycrystalline CZTS thin films: Study of impedance spectroscopy

Here we report the complex impedance spectroscopic analysis of polycrystalline CZTS thin films synthesized by sol-gel spin coating technique without any post deposition sulphurization. The films are characterized by microstructural, compositional, optical and electrical studies to confirm the formation of kesterite phase of CZTS comprises of well distributed compact grains with the optical band gap 1.44 eV. Room temperature electrical characterizations of the CZTS thin films by four-probe and Hall effect technique revealed the p-type conductivity of the films with resistivity similar to 1.45 x 10(-2) Omega cm, mobility similar to 3.7 x 10(3) cm(2) V-1 s(-1) and carrier concentration similar to 1.82 x 10(17) cm(-3). The distribution of relaxation time (DRT) function with improved frequency resolution is reconstructed from the impedance spectra of CZTS film recorded in the frequency range 50 Hz to 5 MHz at room temperature to identify the number of electrical processes in the polycrystalline film. The Nyquist plot is fitted into electrical model consist of three parallel combinations of resistor (R) and capacitor (C) in series as three major peaks in DRT function indicates the presence of different relaxation processes with major contributions from core grains along with smaller contributions from grain boundary and interfaces. The room temperature frequency dependence of dielectric constant, loss tangent and ac conductivity is also studied for the CZTS films