Torakalna hernijacija kralješnične moždine

Herniation of the spinal cord through a dural defect is a rather rare deformity and very easily misdiagnosed as retromedullary occult intraspinal arachnoid cyst or meningocele. The possible origin of the dural defect can be traumatic, iatrogenic or unknown, so in these cases, congenital with great probability. On the thoracal part of the spinal column it shows a rather characteristic and misleading appearance. The anomaly leads to progressive Brown-Sequard syndrome, and the case history can be extremely long. Surgical repair of the dural defect results in improvement, or even complete recovery, if performed in time. These are the facts that emphasize the importance of early diagnosis.Hernijacija kralježnične moždine kroz duralne defekte prilično je rijetka deformacija koja se vrlo lako pogrešno dijagnosticira kao retromedularna okultna intraspinalna arahnoidna cista ili kao meningokela. Uzrok duralnog defekta može biti traumatski, jatrogeni ili nepoznat, a u ovim je slučajevima vrlo vjerojatno prirođen. Torakalni dio kralježnice pokazuje prilično karakterističan izgled, no koji može zavarati. Poremećaj uzrokuje pojavu progresivnog Brown-Séquardova sindroma, a anamneza može biti izrazito dugotrajna. Ako se provede na vrijeme, kirurško zatvaranje duralnog defekta dovodi do poboljšanja, pa čak i do potpunog oporavka, .to upućuje na važnost rane dijagnoze

Blind and reference-free fluorescence lifetime estimation via consumer time-of-flight sensors

Fluorescence lifetime imaging (FLI) is a popular method for extracting useful information that is otherwise unavailable from a conventional intensity image. Usually, however, it requires expensive equipment, is often limited to either distinctly frequency- or time-domain modalities, and demands calibration measurements and precise knowledge of the illumination signal. Here, we present a generalized time-based, cost-effective method for estimating lifetimes by repurposing a consumer-grade time-of-flight sensor. By developing mathematical theory that unifies time- and frequency-domain approaches, we can interpret a time-based signal as a combination of multiple frequency measurements. We show that we can estimate lifetimes without knowledge of the illumination signal and without any calibration. We experimentally demonstrate this blind, reference-free method using a quantum dot solution and discuss the method’s implementation in FLI applications

Idade e crescimento do boca-negra, Helicolenus dactylopterus dactylopterus (Delaroche, 1809) dos Açores

A idade e o crescimento de boca-negra, Helicolenus dactylopterus dactylopterus (Delaroche, 1809), foram estudadas pela observação dos otólitos (sagittae) esquerdos inteiros (n = 401) obtidos de exemplares (14-47 cm de comprimento total) capturados em águas Açoreanas. Enumeraram-se os anéis opacos observados na face anti-sulcal dos otólitos. Os intervalos de idades foram 3-14 anos para machos e 3-12 anos para fêmeas. Estimaram-se e compararam-se os parâmetros da equação de crescimento de von Bertalanffy, entre sexos e entre métodos (leitura directa de otólitos, retrocálculo e análise de distribuições de frequências de comprimentos). Não se verificaram diferenças importantes. Os resultados são diferentes da literatura publicada para a região. Discutem-se as causas e implicações dos resultados obtidos.ABSTRACT: Bluemouth, Helicolenus dactylopterus dactylopterus (Delaroche, 1809), age and growth were studied by whole-view examination of left sagittae (n = 401) obtained from specimens (14-47 cm in total length) caught off the Azores. Opaque rings observed on the anti-sulcal surface of sagittae were enumerated as age estimates. Ages ranged from 3 to 14 years in males and 3 to 12 years in females. The von Bertalanffy growth equation was fitted to average length at age data, and compared between sexes and methods (direct examination of otoliths, backcalculation and length-frequency analysis). No important differences in growth between sexes were found. Results are different from published literature for the region. The causes and implications of the results are discussed

Twenty-Five Years of Landsat Thermal Band Calibration

Landsat-7 Enhanced Thematic Mapper+ (ETM+), launched in April 1999, and Landsat-5 Thematic Mapper (TM), launched in 1984, both have a single thermal band. Both instruments thermal band calibrations have been updated previously: ETM+ in 2001 for a pre-launch calibration error and TM in 2007 for data acquired since the current era of vicarious calibration has been in place (1999). Vicarious calibration teams at Rochester Institute of Technology (RIT) and NASA/Jet Propulsion Laboratory (JPL) have been working to validate the instrument calibration since 1999. Recent developments in their techniques and sites have expanded the temperature and temporal range of the validation. The new data indicate that the calibration of both instruments had errors: the ETM+ calibration contained a gain error of 5.8% since launch; the TM calibration contained a gain error of 5% and an additional offset error between 1997 and 1999. Both instruments required adjustments in their thermal calibration coefficients in order to correct for the errors. The new coefficients were calculated and added to the Landsat operational processing system in early 2010. With the corrections, both instruments are calibrated to within +/-0.7K

Landsat-8 Thermal Infrared Sensor (TIRS) Vicarious Radiometric Calibration

Launched in February 2013, the Landsat-8 carries on-board the Thermal Infrared Sensor (TIRS), a two-band thermal pushbroom imager, to maintain the thermal imaging capability of the Landsat program. The TIRS bands are centered at roughly 10.9 and 12 micrometers (Bands 10 and 11 respectively). They have 100 m spatial resolution and image coincidently with the Operational Land Imager (OLI), also on-board Landsat-8. The TIRS instrument has an internal calibration system consisting of a variable temperature blackbody and a special viewport with which it can see deep space; a two point calibration can be performed twice an orbit. Immediately after launch, a rigorous vicarious calibration program was started to validate the absolute calibration of the system. The two vicarious calibration teams, NASA/Jet Propulsion Laboratory (JPL) and the Rochester Institute of Technology (RIT), both make use of buoys deployed on large water bodies as the primary monitoring technique. RIT took advantage of cross-calibration opportunity soon after launch when Landsat-8 and Landsat-7 were imaging the same targets within a few minutes of each other to perform a validation of the absolute calibration. Terra MODIS is also being used for regular monitoring of the TIRS absolute calibration. The buoy initial results showed a large error in both bands, 0.29 and 0.51 W/sq msrmicrometers or -2.1 K and -4.4 K at 300 K in Band 10 and 11 respectively, where TIRS data was too hot. A calibration update was recommended for both bands to correct for a bias error and was implemented on 3 February 2014 in the USGS/EROS processing system, but the residual variability is still larger than desired for both bands (0.12 and 0.2 W/sq msrmicrometers or 0.87 and 1.67 K at 300 K). Additional work has uncovered the source of the calibration error: out-of-field stray light. While analysis continues to characterize the stray light contribution, the vicarious calibration work proceeds. The additional data have not changed the statistical assessment but indicate that the correction (particularly in band 11) is probably only valid for a subset of data. While the stray light effect is small enough in Band 10 to make the data useful across a wide array of applications, the effect in Band 11 is larger and the vicarious results suggest that Band 11 data should not be used where absolute calibration is required

Sub-pixel Layout for Super-Resolution with Images in the Octic Group

13th European Conference, Zurich, Switzerland, September 6-12, 2014, Proceedings, Part IThis paper presents a novel super-resolution framework by exploring the properties of non-conventional pixel layouts and shapes. We show that recording multiple images, transformed in the octic group, with a sensor of asymmetric sub-pixel layout increases the spatial sampling compared to a conventional sensor with a rectilinear grid of pixels and hence increases the image resolution. We further prove a theoretical bound for achieving well-posed super-resolution with a designated magnification factor w.r.t. the number and distribution of sub-pixels. We also propose strategies for selecting good sub-pixel layouts and effective super-resolution algorithms for our setup. The experimental results validate the proposed theory and solution, which have the potential to guide the future CCD layout design with super-resolution functionality.United States. Air Force (Assistant Secretary of Defense for Research & Engineering Contract #FA8721-05-C-0002)SUTD-MIT International Design Centre (Joint Postdoctoral Programme)Singapore University of Technology and Design (SUTD StartUp Grant ISTD 2011 016)Singapore. Ministry of Education (MOE Academic Research Fund MOE2013-T2-1-159

Studying a Masonry Sail Vault by Antonio da Sangallo the Elder in the Fortezza Vecchia in Livorno

The present contribution aims to illustrate some first results obtained from ongoing research on a 16th-century masonry sail vault in the Fortezza Vecchia (the Old Fortress) in Livorno (Italy). A multidisciplinary research is currently ongoing. The information collected by means of geometric surveys and experimental tests are being used as input data for the different analytical and numerical models expressly developed to study the vault’s structural response. The structural analysis has been performed using two analytical models set within the framework of limit analysis. The first considers the vault as a thin shell, and suitable sets of statically admissible stresses are built; the second model is a modern reinterpretation of Durand-Claye’s method for domes. As an additional term of comparison, numerical analyses are carried out by means of FE models. The study is still under development, and a first set of results has been obtained by limiting the analysis to vertical loads accounting for the self-weight of the vault and that of the overlying soil layer

Thermal Infrared Radiometric Calibration of the Entire Landsat 4, 5, and 7 Archive (1982-2010)

Landsat's continuing record of the thermal state of the earth's surface represents the only long term (1982 to the present) global record with spatial scales appropriate for human scale studies (i.e., tens of meters). Temperature drives many of the physical and biological processes that impact the global and local environment. As our knowledge of, and interest in, the role of temperature on these processes have grown, the value of Landsat data to monitor trends and process has also grown. The value of the Landsat thermal data archive will continue to grow as we develop more effective ways to study the long term processes and trends affecting the planet. However, in order to take proper advantage of the thermal data, we need to be able to convert the data to surface temperatures. A critical step in this process is to have the entire archive completely and consistently calibrated into absolute radiance so that it can be atmospherically compensated to surface leaving radiance and then to surface radiometric temperature. This paper addresses the methods and procedures that have been used to perform the radiometric calibration of the earliest sizable thermal data set in the archive (Landsat 4 data). The completion of this effort along with the updated calibration of the earlier (1985 1999) Landsat 5 data, also reported here, concludes a comprehensive calibration of the Landsat thermal archive of data from 1982 to the presen

Landsat-7 ETM+ Radiometric Calibration Status

Now in its 17th year of operation, the Enhanced Thematic Mapper + (ETM+), on board the Landsat-7 satellite, continues to systematically acquire imagery of the Earth to add to the 40+ year archive of Landsat data. Characterization of the ETM+ on-orbit radiometric performance has been on-going since its launch in 1999. The radiometric calibration of the reflective bands is still monitored using on-board calibration devices, though the Pseudo-Invariant Calibration Sites (PICS) method has proven to be an effect tool as well. The calibration gains were updated in April 2013 based primarily on PICS results, which corrected for a change of as much as -0.2%/year degradation in the worst case bands. A new comparison with the SADE database of PICS results indicates no additional degradation in the updated calibration. PICS data are still being tracked though the recent trends are not well understood. The thermal band calibration was updated last in October 2013 based on a continued calibration effort by NASA/Jet Propulsion Lab and Rochester Institute of Technology. The update accounted for a 0.31 W/sq m/ sr/micron bias error. The updated lifetime trend is now stable to within + 0.4K