Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.Peer ReviewedPostprint (published version

Ultraviolet optical and microstructural properties of MgF2 and LaF3 coatings deposited by ion-beam sputtering and boat and electron-beam evaporation

Single layers of MgF2 and LaF3 were deposited upon superpolished fused-silica and CaF2 substrates by ion-beam sputtering (IBS) as well as by boat and electron beam (e-beam) evaporation and were characterized by a variety of complementary analytical techniques. Besides undergoing photometric and ellipsometric inspection, the samples were investigated at 193 and 633 nm by an optical scatter measurement facility. The structural properties were assessed with atomic-force microscopy, x-ray diffraction, TEM techniques that involved conventional thinning methods for the layers. For measurement of mechanical stress in the coatings, special silicon substrates were coated and analyzed. The dispersion behavior of both deposition materials, which was determined on the basis of various independent photometric measurements and data reduction techniques, is in good agreement with that published in the literature and with the bulk properties of the materials. The refractive indices of the MgF2 coatings ranged from 1.415 to 1.440 for the wavelength of the ArF excimer laser (193 nm) and from 1.435 to 1.465 for the wavelength of the F2 excimer laser (157 nm). For single layers of LaF3 the refractive indices extended from 1.67 to 1.70 at 193 nm to ~1.80 at 157 nm. The IBS process achieves the best homogeneity and the lowest surface roughness values (close to 1 nmrms) of the processes compared in the joint experiment. In contrast to MgF2 boat and e-beam evaporated coatings, which exhibit tensile mechanical stress ranging from 300 to 400 MPa, IBS coatings exhibit high compressive stress of as much as 910 MPa. A similar tendency was found for coating stress in LaF3 single layers. Experimental results are discussed with respect to the microstructural and compositional properties as well as to the surface topography of the coatings

Ultraviolet optical and microstructural properties of MgF2 and LaF3 coatings deposited by ion-beam sputtering and boat and electron-beam evaporation

Single layers of MgF2 and LaF3 were deposited upon superpolished fused-silica and CaF2 substrates by ion-beam sputtering (IBS) as well as by boat and electron beam (e-beam) evaporation and were characterized by a variety of complementary analytical techniques. Besides undergoing photometric and ellipsometric inspection, the samples were investigated at 193 and 633 nm by an optical scatter measurement facility. The structural properties were assessed with atomic-force microscopy, x-ray diffraction, TEM techniques that involved conventional thinning methods for the layers. For measurement of mechanical stress in the coatings, special silicon substrates were coated and analyzed. The dispersion behavior of both deposition materials, which was determined on the basis of various independent photometric measurements and data reduction techniques, is in good agreement with that published in the literature and with the bulk properties of the materials. The refractive indices of the MgF2 coatings ranged from 1.415 to 1.440 for the wavelength of the ArF excimer laser (193 nm) and from 1.435 to 1.465 for the wavelength of the F2 excimer laser (157 nm). For single layers of LaF3 the refractive indices extended from 1.67 to 1.70 at 193 nm to ~1.80 at 157 nm. The IBS process achieves the best homogeneity and the lowest surface roughness values (close to 1 nmrms) of the processes compared in the joint experiment. In contrast to MgF2 boat and e-beam evaporated coatings, which exhibit tensile mechanical stress ranging from 300 to 400 MPa, IBS coatings exhibit high compressive stress of as much as 910 MPa. A similar tendency was found for coating stress in LaF3 single layers. Experimental results are discussed with respect to the microstructural and compositional properties as well as to the surface topography of the coatings

Graphene for Energy: Which Promising Applications and How?

With thousands of publications per year, graphene has raised a particularly great attention these last years. It is true that with an extraordinary combination of physical and technical properties including high flexibility, lightness, electronic mobility and ability to easily change its chemical properties by surface chemistry, graphene appears as an outstanding material which characteristics can interest many fields of application. Among them, energy conversion, production or storage are of such interest that the European's biggest research initiative, the “Graphene Flagship[1]” dedicated a specific work package only to that topic. The present talk aims at reviewing some of these energy applications where graphene and graphene related materials are thought to provide disruptive performances. Actually, fulfil of these promises will depend on the control of the full value chain going from graphene production to integration into the energy devices. Moreover, to fully benefit from graphene properties, the integration strategies have to address the interfacing issue of graphene with hosting material. Further graphene functionalization steps are thus often necessary to adapt the surface graphene properties. It leads to the development of various graphene functionalization technologies without which a successful transfer of graphene into energy applications would be impossible. Various examples dealing with graphene doping, nano-structuring or nano-decorating will be discussed to illustrate the key role of these enabling technologies. [1] http://graphene-flagship.eu/</jats:p

Physical characterization of Ag:WO3_3 cermet films used as top electrode for stable and high contrast organic light-emitting diodes

International audienceA low reflectance green top-emitting OLED using a cermet Ag:WO3 thin film as a top cathode has been fabricated and fully characterized. The cermet film has been made by co-evaporating Ag and WO3 materials. Depending on the Ag concentration in the WO3 matrix, the optical and electrical properties vary a lot, as this will be investigated by optical simulations as well as by studying single film properties deposited on silicon and glass wafers. A plasmonic absorption of Ag occurs for metal concentrations around 60–70%, which confirms the “nano” nature of the cermet material, with Ag nanocrystals embedded in an amorphous WO3 oxide matrix (also confirmed by TEM). Using an optimal (optical, electrical) Ag:WO3 (70%) cermet composition as a top electrode in the OLED allows to strongly reduce the device mean reflectance in the visible while its contrast ratio becomes far better (maximum + 76% at 1000 lux) than a reference green device (with Ag as top electrode instead of Ag:WO3). The device with the cermet shows very good lifetimes when driven at constant current drive: an extrapolated lifetime of 90 000 h at 100 cd/m2 has been estimated, based on accelerating ageing tests done for 1000 cd/m2 to 20 kcd/m2 initial luminance values