Effects of Fertilizer Applications on Seed Yield and Quality of \u3cem\u3eElymus sibiricus\u3c/em\u3e in a Rain-Fed Condition

Siberian wildrye grass (Elymus sibiricus L.) is widely used for reseeding as part of grassland improvement programs in Inner Mongolia. Shortage of seed supply has been a problem that limits wider use of E. sibiricus in Northern China steppes. In this research, we investigate the effects of fertilizer application on the seed yield and seed quality of E. sibiricus grown under rain-fed conditions in Inner Mongolia

Auricle shaping using 3D printing and autologous diced cartilage.

ObjectiveTo reconstruct the auricle using a porous, hollow, three-dimensional (3D)-printed mold and autologous diced cartilage mixed with platelet-rich plasma (PRP).MethodsMaterialise Magics v20.03 was used to design a 3D, porous, hollow auricle mold. Ten molds were printed by selective laser sintering with polyamide. Cartilage grafts were harvested from one ear of a New Zealand rabbit, and PRP was prepared using 10 mL of auricular blood from the same animal. Ear cartilage was diced into 0.5- to 2.0-mm pieces, weighed, mixed with PRP, and then placed inside the hollow mold. Composite grafts were then implanted into the backs of respective rabbits (n = 10) for 4 months. The shape and composition of the diced cartilage were assessed histologically, and biomechanical testing was used to determine stiffness.ResultsThe 3D-printed auricle molds were 0.6-mm thick and showed connectivity between the internal and external surfaces, with round pores of 0.1 to 0.3 cm. After 4 months, the diced cartilage pieces had fused into an auricular shape with high fidelity to the anthropotomy. The weight of the diced cartilage was 5.157 ± 0.230 g (P > 0.05, compared with preoperative). Histological staining showed high chondrocyte viability and the production of collagen II, glycosaminoglycans, and other cartilaginous matrix components. In unrestricted compression tests, auricle stiffness was 0.158 ± 0.187 N/mm, similar to that in humans.ConclusionAuricle grafts were constructed successfully through packing a 3D-printed, porous, hollow auricle mold with diced cartilage mixed with PRP. The auricle cartilage contained viable chondrocytes, appropriate extracellular matrix components, and good mechanical properties.Levels of evidenceNA. Laryngoscope, 129:2467-2474, 2019

The CO poisoning effect in PEMFCs operational at temperatures up to 200 degrees C

The CO poisoning effect on carbon-supported platinum catalysts (at a loading of 0.5 mg Pt/cm(2) per electrode! in polymer electrolyte membrane fuel cells (PEMFCs) has been investigated in a temperature range from 125 to 200 degreesC with the phosphoric acid-doped polybenzimidazole membranes as electrolyte. The effect is very temperature-dependent and can be sufficiently suppressed at elevated temperature. By defining the CO tolerance as a voltage loss less than 10 mV, it is evaluated that 3% CO in hydrogen can be tolerated at current densities up to 0.8 A/cm(2) at 200 degreesC, while at 125 degreesC 0.1% CO in hydrogen can be tolerated at current densities lower than 0.3 A/cm(2). For comparison, the tolerance is only 0.0025% CO (25 ppm) at 80 degreesC at current densities up to 0.2 A/cm(2). The relative anode activity for hydrogen oxidation was calculated as a function of the CO concentration and temperature. The effect of CO2 in hydrogen was also studied. At 175 degreesC, 25% CO2 in the fuel stream showed only the dilution effect. (C) 2003 The Electrochemical Society

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

Due to the broad applications of porous alumina nanostructures, research on fabrication of anodized aluminum oxide (AAO) with nanoporous structure has triggered enormous attention. While fabrication of highly ordered nanoporous AAO with tunable geometric features has been widely reported, it is known that its growth rate can be easily affected by the fluctuation of process conditions such as acid concentration and temperature during electrochemical anodization process. To fabricate AAO with various geometric parameters, particularly, to realize precise control over pore depth for scientific research and commercial applications, a controllable fabrication process is essential. In this work, we revealed a linear correlation between the integrated electric charge flow throughout the circuit in the stable anodization process and the growth thickness of AAO membranes. With this understanding, we developed a facile approach to precisely control the growth process of the membranes. It was found that this approach is applicable in a large voltage range, and it may be extended to anodization of other metal materials such as Ti as well.Hong Kong Research Grant Council [612113]; Hong Kong Innovation Technology Commission [ITS/362/14FP]; Fundamental Research Project of Shenzhen Science & Technology Foundation [JCYJ20130402164725025]; National Natural Science Foundation of China [61574005]; Priority Academic Program Development of Jiangsu Higher Education Institutions [PAPD]SCI(E)[email protected]; [email protected]

Comparison of outcomes between immediate implant-based and autologous reconstruction: 15-year, single-center experience in a propensity score-matched Chinese cohort

Objective: The number of immediate breast reconstruction (IBR) procedures has been increasing in China. This study aimed to investigate the oncological safety of IBR, and to compare the survival and surgical outcomes between implant-based and autologous reconstruction. Methods: Data from patients diagnosed with invasive breast cancer who underwent immediate total breast reconstruction between 2001 and 2016 were retrospectively reviewed. Long-term breast cancer-specific survival (BCSS), disease-free survival (DFS), and locoregional recurrence-free survival (LRFS) were evaluated. Patient satisfaction with the breast was compared between the implant-based and autologous groups. BCSS, DFS, and LRFS were compared between groups after propensity score matching (PSM). Results: A total of 784 IBR procedures were identified, of which 584 were performed on patients with invasive breast cancer (implant-based, n = 288; autologous, n = 296). With a median follow-up of 71.3 months, the 10-year estimates of BCSS, DFS, and LRFS were 88.9% [95% confidence interval (CI) (85.1%–93.0%)], 79.6% [95% CI (74.7%–84.8%)], and 94.0% [95% CI (90.3%–97.8%)], respectively. A total of 124 patients completed the Breast-Q questionnaire, and no statistically significant differences were noted between groups (P = 0.823). After PSM with 27 variables, no statistically significant differences in BCSS, DFS, and LRFS were found between the implant-based (n = 177) and autologous (n = 177) groups. Further stratification according to staging, histological grade, lymph node status, and lymph-venous invasion status revealed no significant survival differences between groups. Conclusions: Both immediate implant-based and autologous reconstruction were reasonable choices with similar long-term oncological outcomes and patient-reported satisfaction among patients with invasive breast cancer in China

Game and Balance Multicast Architecture Algorithms for Sensor Grid

We propose a scheme to attain shorter multicast delay and higher efficiency in the data transfer of sensor grid. Our scheme, in one cluster, seeks the central node, calculates the space and the data weight vectors. Then we try to find a new vector composed by linear combination of the two old ones. We use the equal correlation coefficient between the new and old vectors to find the point of game and balance of the space and data factorsbuild a binary simple equation, seek linear parameters, and generate a least weight path tree. We handled the issue from a quantitative way instead of a qualitative way. Based on this idea, we considered the scheme from both the space and data factor, then we built the mathematic model, set up game and balance relationship and finally resolved the linear indexes, according to which we improved the transmission efficiency of sensor grid. Extended simulation results indicate that our scheme attains less average multicast delay and number of links used compared with other well-known existing schemes