146 research outputs found
Twins:Device-free Object Tracking using Passive Tags
Without requiring objects to carry any transceiver, device-free based object
tracking provides a promising solution for many localization and tracking
systems to monitor non-cooperative objects such as intruders. However, existing
device-free solutions mainly use sensors and active RFID tags, which are much
more expensive compared to passive tags. In this paper, we propose a novel
motion detection and tracking method using passive RFID tags, named Twins. The
method leverages a newly observed phenomenon called critical state caused by
interference among passive tags. We contribute to both theory and practice of
such phenomenon by presenting a new interference model that perfectly explains
this phenomenon and using extensive experiments to validate it. We design a
practical Twins based intrusion detection scheme and implement a real prototype
with commercial off-the-shelf reader and tags. The results show that Twins is
effective in detecting the moving object, with low location error of 0.75m in
average
Effects of Transgenerational Plasticity on Morphological and Physiological Properties of Stoloniferous Herb Centella asiatica Subjected to High/Low Light
Environmentally induced transgenerational plasticity can increase success of progeny and thereby be adaptive if progeny experiences the similarly parental environment. The ecological and evolutionary significance of transgenerational plasticity in plant has been studied mainly in the context of sexual generations. A pot experiment using the stoloniferous herb Centella asiatica was conducted to investigate the effects of high/low light treatment experienced by parental ramets (F0 generation) on morphological and physiological properties of offspring ramets (F2 generation) as well as growth performance. Light environment experienced by parental ramets (F0 generation) significantly influenced petiole length, specific petiole length, internode length of stolon, leaf area, specific leaf area (SLA), leaf nitrogen and chlorophyll contents, potential maximum net photosynthetic rate (Pmax) in offspring ramets subjected to parental or non-parental environments even after they were detached from the parental ramets. Potential maximum net photosynthetic rate (Pmax) of offspring ramets (F2 generation) from parental ramets (F0 generation) subjected to low light treatment was significantly greater than that of offspring ramets (F2 generation) from parental ramets (F0 generation) subjected to high light treatment. Potential maximum net photosynthetic rate (Pmax) of offspring ramets (F2 generation) subjected to parental light environment was greater than that of offspring ramets (F2 generation) subjected to non-parental light environment. The greatest biomass accumulation and total stolon length were observed in offspring ramets (F2 generation) subjected to low light treatment as parental ramets (F0 generation) experienced. When parental ramets (F0 generation) were subjected to low light treatment, biomass accumulation and total stolon length of offspring ramets (F2 generation) experiencing parental light environment were significantly greater than those of offspring ramets (F2 generation) experiencing non-parental light environment. Opposite pattern was observed in offspring ramets (F2 generation) from parental ramets subjected to high light treatment. Our work provides evidence that transgenerational plasticity through both morphological and physiological flexibility was triggered across vegetative generations for stoloniferous herb C. asiatica subjected to high/low light treatment. The transgenerational plasticity can allow offspring ramets to present adaptive phenotype early without lag time in response to the current environment. Thus, it is very important for clonal plants in adapting temporally and spatially heterogeneous habitats
Negative magnetodielectric effect in CaCu₃Ti₄O₁₂
Real part of complex relative dielectric value is relatively decreased as large as ∼5 % from 50 K to 200 K in CaCu₃Ti₄O₁₂, by applying a 6-T static magnetic field. CaCu₃Ti₄O₁₂ is thus implied primarily by the negative magnetodielectric effect, as a unified dielectric system in which 1-D finite dipole chains of B-site titanium ions, coexist with a collective of polaron-like 3d-electrons of A-site copper ions: the dipole chains are thermally activated for lattice ionic polarization above 50 K, and suppressed by the short-range hop of these quasi-particles, while their long-range movement are for bulk electronic polarization above 151 K.This work was supported by the National Natural
Science Foundation of China (Grant No. 11004106) and
the National 973 Project (Nos. 2011CB922101 and
2009CB623303)
Construction of an integrated genetic linkage map for the A genome of Brassica napus using SSR markers derived from sequenced BACs in B. rapa
Background
The Multinational Brassica rapa Genome Sequencing Project (BrGSP) has developed valuable genomic resources, including BAC libraries, BAC-end sequences, genetic and physical maps, and seed BAC sequences for Brassica rapa. An integrated linkage map between the amphidiploid B. napus and diploid B. rapa will facilitate the rapid transfer of these valuable resources from B. rapa to B. napus (Oilseed rape, Canola). Results
In this study, we identified over 23,000 simple sequence repeats (SSRs) from 536 sequenced BACs. 890 SSR markers (designated as BrGMS) were developed and used for the construction of an integrated linkage map for the A genome in B. rapa and B. napus. Two hundred and nineteen BrGMS markers were integrated to an existing B. napus linkage map (BnaNZDH). Among these mapped BrGMS markers, 168 were only distributed on the A genome linkage groups (LGs), 18 distrubuted both on the A and C genome LGs, and 33 only distributed on the C genome LGs. Most of the A genome LGs in B. napus were collinear with the homoeologous LGs in B. rapa, although minor inversions or rearrangements occurred on A2 and A9. The mapping of these BAC-specific SSR markers enabled assignment of 161 sequenced B. rapa BACs, as well as the associated BAC contigs to the A genome LGs of B. napus. Conclusion
The genetic mapping of SSR markers derived from sequenced BACs in B. rapa enabled direct links to be established between the B. napus linkage map and a B. rapa physical map, and thus the assignment of B. rapa BACs and the associated BAC contigs to the B. napus linkage map. This integrated genetic linkage map will facilitate exploitation of the B. rapa annotated genomic resources for gene tagging and map-based cloning in B. napus, and for comparative analysis of the A genome within Brassica species
Structural, thermal and dissolution properties of MgO- and CaO-containing borophosphate glasses: effect of Fe2O3 addition
This paper investigated manufacture of high-durability phosphate glass fibres for biomedical applications. Five different borophosphate glass formulations in the systems of 45P2O5–5B2O3–5Na2O–(29 − x)CaO–16MgO–(x)Fe2O3 and 45P2O5–5B2O3–5Na2O–24CaO–(21 − x)MgO–(x)Fe2O3 where x = 5, 8 and 11 mol% were produced via melt quenching. The compositions and amorphous nature of the glasses were confirmed by ICP-MS and XRD, respectively. FTIR results indicated depolymerisation of the phosphate chains with a decrease in Q2 units with increasing Fe2O3 content. DSC analyses showed an increase in Tg by ~5 °C with an increment of 3 mol% in Fe2O3 content. The thermal properties were also used to calculate processing window (i.e. Tc,ons—Tg) and another parameter, Kgl, to determine the suitability for fibre drawing directly from melt, which equals (Tc,ons—Tg)/(Tl—Tc,ons). The degradation study conducted in PBS solution at 37 °C showed a decrease of 25–47% in degradation rate with increasing Fe2O3 content. This confirmed that the chemical durability of the glasses had increased, which was suggested to be due to Fe2O3 addition. Furthermore, the density measured via Archimedes method revealed a linear increase with increasing Fe2O3 content
Review of advanced road materials, structures, equipment, and detection technologies
As a vital and integral component of transportation infrastructure, pavement has a direct and tangible impact on socio-economic sustainability. In recent years, an influx of groundbreaking and state-of-the-art materials, structures, equipment, and detection technologies related to road engineering have continually and progressively emerged, reshaping the landscape of pavement systems. There is a pressing and growing need for a timely summarization of the current research status and a clear identification of future research directions in these advanced and evolving technologies. Therefore, Journal of Road Engineering has undertaken the significant initiative of introducing a comprehensive review paper with the overarching theme of “advanced road materials, structures, equipment, and detection technologies”. This extensive and insightful review meticulously gathers and synthesizes research findings from 39 distinguished scholars, all of whom are affiliated with 19 renowned universities or research institutions specializing in the diverse and multidimensional field of highway engineering. It covers the current state and anticipates future development directions in the four major and interconnected domains of road engineering: advanced road materials, advanced road structures and performance evaluation, advanced road construction equipment and technology, and advanced road detection and assessment technologies
Overall Survival Time Prediction for High-grade Glioma Patients based on Large-scale Brain Functional Networks
- …