10,377 research outputs found
HYDROBIA ULVAE: A DEPOSIT-FEEDER FOR CLEANING LIVING HARD-SHELLED FORAMINIFERA
International audienceThis study proposes a new method for fast and inexpensive extraction of a large number of living foraminifera for laboratory cultures. The method is a significant improvement over current extraction methods, which are highly time-consuming. Several treatments were designed to test the method. Sediment bearing foraminifera from Brouage Mudflat (Atlantic coast of France) was washed through a 50-µm sieve and distributed in glass Petri dishes with 20, 40 and 80 specimens of Hydrobia ulvae, a common gastropod from European intertidal mudflats. As a control experiment, one dish was treated similarly but maintained without Hydrobia. After two days, most of the sediment in the Hydrobia treatments was compacted into small cylindrical gastropod feces and the tests of living benthic foraminifera (Ammonia tepida and Haynesina germanica) were clean and easily visible. Additional experiments showed that the foraminifera were not ingested by Hydrobia ulvae, and could be picked quickly and easily
Cavity-Backed Proximity-Coupled Reconfigurable Microstrip Antenna with Agile Polarizations and Steerable Beams
© 1963-2012 IEEE. A major challenge for a combined reconfigurable antenna is to realize both polarization switching and beam steering independently in a compact antenna structure. A cavity-backed proximity-coupled reconfigurable microstrip antenna proposed in this communication provides an efficient solution. Beam lead p-i-n diodes DSM8100-000 are employed as switching elements to achieve reconfiguration. Three different linear polarizations (0°, 45°, and 90°) are realized by switching the diodes on a proximity-coupled feed network. For each polarization state, the main beam can be steered to three directions by using a reconfigurable parasitic-element network. The parasitic-element network is printed on the same plane of the radiating patch, thereby making the antenna compact. This antenna has nine different working modes, and for all the working modes, the reflection coefficients are below -10 dB with the measured realized gains ranging from 7.2 to 8.1 dBi
Wideband Matching of Full-Wavelength Dipole with Reflector for Base Station
© 1963-2012 IEEE. This communication introduces a wideband hybrid feeding method for full-wavelength dipole antennas with a reflector. A full-wavelength dipole is designed to cover the band from 698 to 960 MHz for cellular base station applications. Its matching circuit consists of a triple-tuned circuit and a quasi-quarter-wavelength impedance transformer. The proposed matching circuit can provide balanced feeding as a balun and has a compact size. The working mechanism and a complete design scheme of the proposed matching circuit are elaborated. The matching circuit is designed and optimized using a circuit theory model and then physically realized using microstrip lines based on full-wave simulation. The measured reflection coefficient |S-{11}| is lesser than -14 dB across the entire band from 698 to 960 MHz, exhibiting a bandwidth of 32%. This is the first time that a wideband center-fed full-wavelength dipole is proposed
Cultural fairness of the Digit Vigilance Test
This study was designed to examine the cultural fairness of the Digit Vigilance Test by comparing performance on the test between Chinese and American participants. Thirty-five Chinese undergraduates, 12 male and 23 female, were recruited as participants. Their scores on the test, specifically the time and error scores, were compared with the published American norms. The findings indicated equivalent performance of the two samples on the test, suggesting the cultural fairness of the Digit Vigilance Test. Nevertheless, generalization of the present findings to other Chinese populations should take into consideration the unique characteristics of the sample in this study.published_or_final_versio
A phased array antenna employing reconfigurable defected microstrip structure (RDMS)
© 2015 IEEE. In this paper, a compact phase-shifting unit based on reconfigurable defected microstrip structure (RDMS) is used to provide controllable phase shift for a 1×4 phased array antenna. The RDMS is made by etching two slots on the microstrip line and loading with PIN diodes. By controlling the working states of the employed PIN diodes, the RDMS is able to provide phase shift. A 1×4 phased array antenna is built employing optimized RDMS. The tested results show that the antenna can work in the frequency band from 5.1-5.4 GHz, and switch its beam to -15°, 0°, and 15° in the H-plane with the average gain of 10 dBi. Compared to our previous work, significantly size reduction of 55% is achieved with similar performance
Determination of plutonium in nitric acid solutions using energy dispersive L X-ray fluorescence with a low power X-ray generator
International audienceThis work presents the development of an in-line energy dispersive L X-ray fluorescence spectrometer setup , with a low power X-ray generator and a secondary target, for the determination of plutonium concentration in nitric acid solutions. The intensity of the L X-rays from the internal conversion and gamma rays emitted by the daughter nuclei from plutonium are minimized and corrected, in order to eliminate the interferences with the L X-ray fluorescence spectrum. The matrix effects are then corrected by the Compton peak method. A calibration plot for plutonium solutions within the range 0.1-20 g.L −1 is given
Wideband feeding method for full-wave dipole
© 2017 IEEE. This paper introduces a wide-band feeding method for full-wave dipole antennas. A full-wave dipole is designed to cover the band from 698 MHz to 960 MHz for cellular base station applications. Its matching circuit consists of a laddertype filter design and a quasi-quarter-wavelength resistance transformer. The proposed matching circuit can provide balanced feeding as a balun and has a compact size. The matching circuit is designed and optimized using a circuit theory model and then physically realized using microstrip lines based on full-wave simulation. The simulated reflection coefficient |S11| is < -15 dB across the entire target band, exhibiting a bandwidth of 32%
Modelling waving crops using large-eddy simulation: Comparison with experiments and a linear stability analysis
International audienceIn order to investigate the possibility of modelling plant motion at the landscape scale, an equation for crop plant motion, forced by an instantaneous velocity field, is introduced in a large-eddy simulation (LES) airflow model, previously validated over homogeneous and heterogeneous canopies. The canopy is simply represented as a poroelastic continuous medium, which is similar in its discrete form to an infinite row of identical oscillating stems. Only one linear mode of plant vibration is considered. Two-way coupling between plant motion and the wind flow is insured through the drag force term. The coupled model is validated on the basis of a comparison with measured movements of an alfalfa crop canopy. It is also compared with the outputs of a linear stability analysis. The model is shown to reproduce the well-known phenomenon of honami which is typical of wave-like crop motions on windy days. The wavelength of the main coherent waving patches, extracted using a bi-orthogonal decomposition (BOD) of the crop velocity fields, is in agreement with that deduced from video recordings. The main spatial and temporal characteristics of these waving patches exhibit the same variation with mean wind velocity as that observed with the measurements. However they differ from the coherent eddy structures of the wind flow at canopy top, so that coherent waving patches cannot be seen as direct signatures of coherent eddy structures. Finally, it is shown that the impact of crop motion on the wind dynamics is negligible for current wind speed values. No lock-in mechanism of coherent eddy structures on plant motion is observed, in contradiction with the linear stability analysis. This discrepancy may be attributed to the presence of a nonlinear saturation mechanism in LES. © 2010 Cambridge University Press
Piercing an interface with a brush: collaborative stiffening
The hairs of a painting brush withdrawn from a wetting liquid self-assemble
into clumps whose sizes rely on a balance between liquid surface tension and
hairs bending rigidity. Here we study the situation of an immersed carpet in an
evaporating liquid bath : the free extremities of the hairs are forced to
pierce the liquid interface. The compressive capillary force on the tip of
flexible hairs leads to buckling and collapse. However we find that the
spontaneous association of hairs into stronger bundles may allow them to resist
capillary buckling. We explore in detail the different structures obtained and
compare them with similar patterns observed in micro-structured surfaces such
as carbon nanotubes "forests".Comment: 9 pages, 6 figure
- …