Bose-Einstein condensation in a circular waveguide

We have produced Bose-Einstein condensates in a ring-shaped magnetic waveguide. The few-millimeter diameter non-zero bias ring is formed from a time-averaged quadrupole ring. Condensates which propagate around the ring make several revolutions within the time it takes for them to expand to fill the ring. The ring shape is ideally suited for studies of vorticity in a multiply-connected geometry and is promising as a rotation sensor.Comment: 4 pages, 4 figure

Cavity optomechanics with Si3N4 membranes at cryogenic temperatures

We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of the cavity elements can be a limitation, and we discuss methods to reduce these effects sufficiently to achieve ground state cooling. This promising new platform should have versatile uses for hybrid devices and searches for radiation pressure shot noise.Comment: 19 pages, 5 figures, submitted to New Journal of Physic

Manifestation of classical wave delays in a fully quantized model of the scattering of a single photon

We consider a fully quantized model of spontaneous emission, scattering, and absorption, and study propagation of a single photon from an emitting atom to a detector atom both with and without an intervening scatterer. We find an exact quantum analog to the classical complex analytic signal of an electromagnetic wave scattered by a medium of charged oscillators. This quantum signal exhibits classical phase delays. We define a time of detection which, in the appropriate limits, exactly matches the predictions of a classically defined delay for light propagating through a medium of charged oscillators. The fully quantized model provides a simple, unambiguous, and causal interpretation of delays that seemingly imply speeds greater than c in the region of anomalous dispersion.Comment: 18 pages, 4 figures, revised for clarity, typos corrrecte

Complex consultations in primary care: a tool for assessing the range of health problems and issues addressed in general practice consultations

Background: There is an increasing recognition that many consultations in general practice involve several problems covering multiple disease domains. However there is a paucity of reliable tools and techniques to understand and quantify this phenomenon. The objective was to develop a tool that can be used to measure the number and type of problems discussed in primary care consultations. Methods: Thirteen consultations between general practitioners and patients were initially videoed and reviewed to identify the problems and issues discussed. An iterative process involving a panel of clinicians and researchers and repeated cycles of testing and development was used to develop a measurement proforma and coding manual for assessment of video recorded consultations. The inter-rater reliability of this tool was assessed in 60 consultations. Results: The problems requiring action were usually readily identified. However the different dimensions of the problem and how they were addressed required the identification and definition of ‘issues’. A coding proforma was developed that allowed quantification of the numbers and types of health problems and issues discussed. Ten categories of issues were identified and defined. At the consultation level, inter-rater agreements for the number of problems discussed (within ±1), types of problems and issues were 98.3%, 96.5% and 90% respectively. The tool has subsequently been used to analyse 229 consultations. Conclusion: The iterative approach to development of the tool reflected the complexity of doctor-patient interactions. A reliable tool has been developed that can be used to analyse the number and range of problems managed in primary care consultations

An electrostatic mechanism for Ca(2+)-mediated regulation of gap junction channels.

Gap junction channels mediate intercellular signalling that is crucial in tissue development, homeostasis and pathologic states such as cardiac arrhythmias, cancer and trauma. To explore the mechanism by which Ca(2+) blocks intercellular communication during tissue injury, we determined the X-ray crystal structures of the human Cx26 gap junction channel with and without bound Ca(2+). The two structures were nearly identical, ruling out both a large-scale structural change and a local steric constriction of the pore. Ca(2+) coordination sites reside at the interfaces between adjacent subunits, near the entrance to the extracellular gap, where local, side chain conformational rearrangements enable Ca(2+)chelation. Computational analysis revealed that Ca(2+)-binding generates a positive electrostatic barrier that substantially inhibits permeation of cations such as K(+) into the pore. Our results provide structural evidence for a unique mechanism of channel regulation: ionic conduction block via an electrostatic barrier rather than steric occlusion of the channel pore

Tensile strained InxGa1−xPIn_{x}Ga_{1-x}P membranes for cavity optomechanics

We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigenfrequencies up to 1 MHz, yielding Q*f products of 2*10^12 Hz for a tensile stress of ~170 MPa. Incorporating such membranes in a high finesse Fabry-Perot cavity, we extract an upper limit to the total optical loss (including both absorption and scatter) of 40 ppm at 1064 nm and room temperature. Further reductions of the In content of this alloy will enable tensile stress levels of 1 GPa, with the potential for a significant increase in the Q*f product, assuming no deterioration in the mechanical loss at this composition and strain level. This materials system is a promising candidate for the integration of strained semiconductor membrane structures with low-loss semiconductor mirrors and for realizing stacks of membranes for enhanced optomechanical coupling.Comment: 10 pages, 3 figure

One-loop divergences in the two-dimensional non-anticommutative supersymmetric sigma-model

We discuss the structure of the non-anticommutative N=2 non-linear sigma-model in two dimensions, constructing differential operators which implement the deformed supersymmetry generators and using them to reproduce the classical action. We then compute the one-loop quantum corrections and express them in a more compact form using the differential operators.Comment: 20pp, 8 figures, uses LaTeX. Title expanded to clarify conten

A system of relational syllogistic incorporating full Boolean reasoning

We present a system of relational syllogistic, based on classical propositional logic, having primitives of the following form: Some A are R-related to some B; Some A are R-related to all B; All A are R-related to some B; All A are R-related to all B. Such primitives formalize sentences from natural language like `All students read some textbooks'. Here A and B denote arbitrary sets (of objects), and R denotes an arbitrary binary relation between objects. The language of the logic contains only variables denoting sets, determining the class of set terms, and variables denoting binary relations between objects, determining the class of relational terms. Both classes of terms are closed under the standard Boolean operations. The set of relational terms is also closed under taking the converse of a relation. The results of the paper are the completeness theorem with respect to the intended semantics and the computational complexity of the satisfiability problem.Comment: Available at http://link.springer.com/article/10.1007/s10849-012-9165-

Isotropic-nematic phase transition in suspensions of filamentous virus and the neutral polymer Dextran

We present an experimental study of the isotropic-nematic phase transition in an aqueous mixture of charged semi-flexible rods (fd virus) and neutral polymer (Dextran). A complete phase diagram is measured as a function of ionic strength and polymer molecular weight. At high ionic strength we find that adding polymer widens the isotropic-nematic coexistence region with polymers preferentially partitioning into the isotropic phase, while at low ionic strength the added polymer has no effect on the phase transition. The nematic order parameter is determined from birefringence measurements and is found to be independent of polymer concentration (or equivalently the strength of attraction). The experimental results are compared with the existing theoretical predictions for the isotropic-nematic transition in rods with attractive interactions.Comment: 8 Figures. To be published in Phys. Rev. E. For more information see http://www.elsie.brandeis.ed

Use of a pressure sensing sheath: comparison with standard means of blood pressure monitoring in catheterization procedures

PURPOSE: Monitoring of blood pressure (BP) during procedures is variable, depending on multiple factors. Common methods include sphygmomanometer (BP cuff), separate radial artery catheterization, and side port monitoring of an indwelling sheath. Each means of monitoring has disadvantages, including time consumption, added risk, and signal dampening due to multiple factors. We sought an alternative approach to monitoring during procedures in the catheterization laboratory. METHODS: A new technology involving a 330 microm fiberoptic sensor embedded in the wall of a sheath structure was tested against both radial artery catheter and sphygmomanometer readings obtained simultaneous with readings recorded from the pressure sensing system (PSS). Correlations and Bland-Altman analysis were used to determine whether use of the PSS could substitute for these standard techniques. RESULTS: The results indicated highly significant correlations in systolic, diastolic, and mean arterial pressures (MAP) when compared against radial artery catheterization (p \u3c 0.0001), and MAP means differed by \u3c 4%. Bland-Altman analysis of the data suggested that the sheath measurements can replace a separate radial artery catheter. While less striking, significant correlations were seen when PSS readings were compared against BP cuff readings. CONCLUSIONS: The PSS has competitive functionality to that seen with a dedicated radial artery catheter for BP monitoring and is available immediately on sheath insertion without the added risk of radial catheterization. The sensor is structurally separated from the primary sheath lumen and readings are unaffected by device introduction through the primary lumen. Time delays and potential complications from radial artery catheterization are avoided