Explicit expressions for the minimum efficiency and most penetrating particle size of Nuclepore filters

Nuclepore filters are capillary pore membrane filters with an array of microscopic cylindrical holes of uniform diameters. Their structure is suitable for particle collection and ensuing offline analyses, therefore they are being widely used for exposure assessment of engineered nanoparticles, ambient PM2.5, virus, bacteria, asbestos, etc., as well as in powder manufacturing industries. However, there exists a particle size range in which all the filtration capture mechanisms are not effective. This size is the most penetrating particle size (MPPS), which corresponds to the minimum efficiency (ME) of the filter. Both MPPS and ME are important parameters for a user to select an adequate Nuclepore filter and preferred operating conditions. For rapid estimation of the MPPS and ME, we derived their explicit expressions by simplifying the formulas for the impaction, diffusion and interception deposition and differentiating the combined efficiency with respect to the particle size. The comparison between the experimental data and the prediction from the explicit expressions shows the explicit expressions can provide MPPS for a wide range of filter properties (pore radius, porosity and length) and filtration conditions (particle density, face velocity and temperature). The ME can also be estimated satisfactorily when a simplified term of filter surface diffusion deposition is further considered. By the explicit expressions of MPPS and ME, a quick screening for selecting a Nuclepore filter with the proper properties and suitable filtration conditions can be easily achieved. From the theoretical point of view, the explicit expressions facilitate better understanding of the effects of filter properties and conditions on the filtration characteristic

Interlaboratory comparison to evaluate the methodology for determination of the media filtration efficiency against nanoparticles

Current international standards dealing with efficiency test for filters and filter media focus on measurement of the minimum efficiency at the most penetrating particle size. The available knowledge and instruments provide a solid base for development of test methods to determine the effectiveness of filtration media against airborne nanoparticles down to single-digit nanometer range. An interlaboratory evaluation was performed in the framework of the European Mandate M/461 activities, within the Technical Committee 195 of European Committee for Standardization (CEN/TC195). The purpose was to develop a methodology to determine effectiveness of filtration media against air-borne particles in the 3 – 500 nm range. Five different laboratories (Camfil, ETH/Empa, Politecnico di Torino, University of Minnesota, Unifil) participate in the round robin test in order to verify the repeatability and reproducibility of the test method. The qualification of test rig and apparatus was performed prior of the filtration efficiency and air flow resistance measurement tests.Twilled dutch weave wire mesh was chosen to perform the validation filtration efficiency tests so as to ensure high uniformity of the samples being tested by each different laboratory. We present the experimental data with the discussion about their validity

Occupational exposure to nano-TiO2 in the life cycle steps of new depollutant mortars used in construction

The present work is focused on the measurement of workers exposure to nano-TiO2 in the life cycle steps of depollutant mortars. It has been done in the framework of the SCAFFOLD project, which aims at the management of potential risks arising from the use of manufactured nanomaterials in construction. Main findings can be summarized as follows: (1) The occupational exposure to nano- TiO2 is below 0.3 mg/m3 for all measured scenarios. The highest concentrations were measured during the cleaning task (in the nano- TiO2 manufacturing process) and during the application (spraying) of depollutant coatings on a wall. (2) It was found a high release of particles above the background in several tasks as expected due to the nature of the activities performed. The maximum concentration was measured during drilling and during adding powder materials (mean total particle concentration up to 5.591E+04 particles/cm3 and 5.69E+04 particles/cm3). However, considering data on total particle concentration released, no striking differences have been observed when tasks have been performed using conventional materials in the sector (control) and when using materials doped with nano-objects.European Commission's FP

Analysis of multivariate stochastic signals sampled by on-line particle analyzers: Application to the quantitative assessment of occupational exposure to NOAA in multisource industrial scenarios (MSIS)

In multisource industrial scenarios (MSIS) coexist NOAA generating activities with other productive sources of airborne particles, such as parallel processes of manufacturing or electrical and diesel machinery. A distinctive characteristic of MSIS is the spatially complex distribution of aerosol sources, as well as their potential differences in dynamics, due to the feasibility of multi-task configuration at a given time. Thus, the background signal is expected to challenge the aerosol analyzers at a probably wide range of concentrations and size distributions, depending of the multisource configuration at a given time. Monitoring and prediction by using statistical analysis of time series captured by on-line particle analyzersin industrial scenarios, have been proven to be feasible in predicting PNC evolution provided a given quality of net signals (difference between signal at source and background). However the analysis and modelling of non-consistent time series, influenced by low levels of SNR (Signal-Noise Ratio) could build a misleading basis for decision making. In this context, this work explores the use of stochastic models based on ARIMA methodology to monitor and predict exposure values (PNC). The study was carried out in a MSIS where an case study focused on the manufacture of perforated tablets of nano-TiO2 by cold pressing was performed.Research carried out by projects SCAFFOLD and EHS Advance were made possible thanks to funding from European Commission through FP7 (GA 319092) and Basque Country Government through ETORTEK Programme

Structure-based design and synthesis of antiparasitic pyrrolopyrimidines targeting pteridine reductase 1

The treatment of Human African Trypanosomiasis remains a major unmet health need in sub-Saharan Africa. Approaches involving new molecular targets are important and pteridine reductase 1 (PTR1), an enzyme that reduces dihydrobiopterin in Trypanosoma spp. has been identified as a candidate target and it has been shown previously that substituted pyrrolo[2,3-d]pyrimidines are inhibitors of PTR1 from T. brucei (J. Med. Chem. 2010, 53, 221-229). In this study, 61 new pyrrolo[2,3-d]pyrimidines have been prepared, designed with input from new crystal structures of 23 of these compounds complexed with PTR1, and evaluated in screens for enzyme inhibitory activity against PTR1 and in vitro antitrypanosomal activity. 8 compounds were sufficiently active in both screens to take forward to in vivo evaluation. Thus although evidence for trypanocidal activity in a stage I disease model in mice was obtained, the compounds were too toxic to mice for further development

Identification of Hepatic Niche Harboring Human Acute Lymphoblastic Leukemic Cells via the SDF-1/CXCR4 Axis

In acute lymphoblastic leukemia (ALL) patients, the bone marrow niche is widely known to be an important element of treatment response and relapse. Furthermore, a characteristic liver pathology observed in ALL patients implies that the hepatic microenvironment provides an extramedullary niche for leukemic cells. However, it remains unclear whether the liver actually provides a specific niche. The mechanism underlying this pathology is also poorly understood. Here, to answer these questions, we reconstituted the histopathology of leukemic liver by using patients-derived primary ALL cells into NOD/SCID/Yc null mice. The liver pathology in this model was similar to that observed in the patients. By using this model, we clearly demonstrated that bile duct epithelial cells form a hepatic niche that supports infiltration and proliferation of ALL cells in the liver. Furthermore, we showed that functions of the niche are maintained by the SDF-1/CXCR4 axis, proposing a novel therapeutic approach targeting the extramedullary niche by inhibition of the SDF-1/CXCR4 axis. In conclusion, we demonstrated that the liver dissemination of leukemia is not due to nonselective infiltration, but rather systematic invasion and proliferation of leukemic cells in hepatic niche. Although the contribution of SDF-1/CXCR4 axis is reported in some cancer cells or leukemic niches such as bone marrow, we demonstrated that this axis works even in the extramedullary niche of leukemic cells. Our findings form the basis for therapeutic approaches that target the extramedullary niche by inhibiting the SDF-1/CXCR4 axis

Strategies, methods and tools for managing nanorisks in construction

This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO2, SiO2, carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of "nano-management" in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies.Research carried out by project SCAFFOLD was made possible thanks to funding from the European Commission, through the Seventh Framework Programme (GA 280535

ALL-1/MLL1, a homologue of Drosophila TRITHORAX, modifies chromatin and is directly involved in infant acute leukaemia

Rearrangements of the ALL-1/MLL1 gene underlie the majority of infant acute leukaemias, as well as of therapy-related leukaemias developing in cancer patients treated with inhibitors of topoisomerase II, such as VP16 and doxorubicin. The rearrangements fuse ALL-1 to any of \u3e50 partner genes or to itself. Here, we describe the unique features of ALL-1-associated leukaemias, and recent progress in understanding molecular mechanisms involved in the activity of the ALL-1 protein and of its Drosophila homologue TRITHORAX

Sharp bounds and normalization of Wiener-type indices

10.1371/journal.pone.0078448PLoS ONE811-POLN