an open and modular hardware node for wireless sensor and body area networks

Health monitoring is nowadays one of the hottest markets due to the increasing interest in prevention and treatment of physical problems. In this context the development of wearable, wireless, open-source, and nonintrusive sensing solutions is still an open problem. Indeed, most of the existing commercial architectures are closed and provide little flexibility. In this paper, an open hardware architecture for designing a modular wireless sensor node for health monitoring is proposed. By separating the connection and sensing functions in two separate boards, compliant with the IEEE1451 standard, we add plug and play capabilities to analog transducers, while granting at the same time a high level of customization. As an additional contribution of the work, we developed a cosimulation tool which simplifies the physical connection with the hardware devices and provides support for complex systems. Finally, a wireless body area network for fall detection and health monitoring, based on wireless node prototypes realized according to the proposed architecture, is presented as an application scenario

Analysis of LGV usage for the improvement of a customized production

The paper describes an approach for analyzing the use of a Laser-Guided Vehicle (LGV) in the context of the small and medium-sized enterprise. The use of LGVs is an efficient solution to provide more flexibility in the context of Just-In-Time production; however, the investment cost can limit this application. A methodology has been proposed in this work to analyze the technical feasibility of using an LGV in the manufacturing industry of customized products. The test case focuses on the study of a laser-guided system to optimize the handling of molds for customized production. In this scenario, an LGV is proposed to substitute manual carts used for moving molds from the warehouse to the injection machines. The traditional path included an intermediate station for pre-heating the molds in hot-air ovens. The proposed solution includes the study of an induction heating system on the LGV to optimize time and energy consumption

Cyber-physical manufacturing systems: An architecture for sensor integration, production line simulation and cloud services

none9noThe pillars of Industry 4.0 require the integration of a modern smart factory, data storage in the Cloud, access to the Cloud for data analytics, and information sharing at the software level for simulation and hardware-in-the-loop (HIL) capabilities. The resulting cyber-physical system (CPS) is often termed the cyber-physical manufacturing system, and it has become crucial to cope with this increased system complexity and to attain the desired performances. However, since a great number of old production systems are based on monolithic architectures with limited external communication ports and reduced local computational capabilities, it is difficult to ensure such production lines are compliant with the Industry 4.0 pillars. A wireless sensor network is one solution for the smart connection of a production line to a CPS elaborating data through cloud computing. The scope of this research work lies in developing a modular software architecture based on the open service gateway initiative framework, which is able to seamlessly integrate both hardware and software wireless sensors, send data into the Cloud for further data analysis and enable both HIL and cloud computing capabilities. The CPS architecture was initially tested using HIL tools before it was deployed within a real manufacturing line for data collection and analysis over a period of two months.openPrist Mariorosario; Monteriu' Andrea; Pallotta Emanuele; Cicconi Paolo; Freddi Alessandro; Giuggioloni Federico; Caizer Eduard; Verdini Carlo; Longhi SauroPrist, Mariorosario; Monteriu', Andrea; Pallotta, Emanuele; Cicconi, Paolo; Freddi, Alessandro; Giuggioloni, Federico; Caizer, Eduard; Verdini, Carlo; Longhi, Saur

YbPd2In : A promising candidate for strong entropy accumulation at very low temperature

We report on synthesis, crystal structure, magnetic, thermodynamic, and transport properties of the compound YbPd2In, crystallizing as a Heusler structure type. A trivalent state of the rare earth was determined by fitting the magnetic susceptibility with a Curie-Weiss law. This compound is characterized by showing very weak magnetic interactions and a negligible Kondo effect. A specific-heat jump was observed at T 48250mK, followed at higher temperature by a power-law decrease of CP(T)/T. The resulting large electronic entropy increase at very low temperature is rapidly shifted to higher temperature by the application of magnetic field. This magnetocaloric effect places YbPd2In as a very good candidate for adiabatic demagnetization cooling processes

Ground state and stability of the fractional plateau phase in metallic Shastry Sutherland system TmB4

We present a study of the ground state and stability of the fractional plateau phase FPP with M Msat 1 8 in the metallic Shastry Sutherland system TmB4. Magnetization M measurements show that the FPP states are thermodynamically stable when the sample is cooled in constant magnetic field from the paramagnetic phase to the ordered one at 2 K. On the other hand, after zero field cooling and subsequent magnetization these states appear to be of dynamic origin. In this case the FPP states are closely associated with the half plateau phase HPP, M Msat , mediate the HPP to the low field antiferromagnetic AF phase and depend on the thermodynamic history. Thus, in the same place of the phase diagram both, the stable and the metastable dynamic fractional plateau FP states, can be observed, depending on the way they are reached. In case of metastable FP states thermodynamic paths are identified that lead to very flat fractional plateaus in the FPP. Moreover, with a further decrease of magnetic field also the low field AF phase becomes influenced and exhibits a plateau of the order of 1 1000 Msa

Thresholds of riparian forest use by terrestrial mammals in a fragmented Amazonian deforestation frontier

Species persistence in fragmented landscapes is intimately related to the quality, structure, and context of remaining habitat remnants. Riparian vegetation is legally protected within private landholdings in Brazil, so we quantitatively assessed occupancy patterns of terrestrial mammals in these remnants, examining under which circumstances different species effectively use them. We selected 38 riparian forest patches and five comparable riparian sites within continuous forest, at which we installed four to five camera-traps per site (199 camera-trap stations). Terrestrial mammal assemblages were sampled for 60 days per station during the dry seasons of 2013 and 2014. We modelled species occupancy and detection probabilities within riparian forest remnants, and examined the effects of patch size, habitat quality, and landscape structure on occupancy probabilities. We then scaled-up modelled occupancies to all 1915 riparian patches throughout the study region to identify which remnants retain the greatest potential to work as habitat for terrestrial vertebrates. Of the ten species for which occupancy was modelled, six responded to forest quality (remnant degradation, cattle intrusion, palm aggregations, and understorey density) or structure (remnant width, isolation, length, and area of the patch from which it originates). Patch suitability was lower considering habitat quality than landscape structure, and virtually all riparian remnants were unsuitable to maintain a high occupancy probability for all species that responded to forest patch quality or structure. Beyond safeguarding legal compliance concerning riparian remnant amount, ensuring terrestrial vertebrate persistence in fragmented landscapes will require curbing the drivers of forest degradation within private landholdings