Donkey's milk caseins characterization

In the recent years the interest around donkey's milk had a marked increase since it has been demonstrated that this milk can be used for feeding of infants affected by dairy cow's milk protein intolerance (Businco et al., 2000; Iacono et al., 1992)

Post-test simulations for the NACIE-UP benchmark by STH codes

This paper illustrates the results obtained in the last phase of the NACIE-UP benchmark activity foreseen inside the EU SESAME Project. The purpose of this research activity, performed by system thermal–hydraulic (STH) codes, is finalized to the improvement, development and validation of existing STH codes for Heavy Liquid Metal (HLM) systems. All the participants improved their modelling of the NACIE-UP facility, respect to the initial blind simulation phase, adopting the actual experimental boundary conditions and reducing as much as possible sources of uncertainty in their numerical model. Four different STH codes were employed by the participants to the benchmark to model the NACIE-UP facility, namely: CATHARE for ENEA, ATHLET for GRS, RELAP5-3D© for the “Sapienza” University of Rome and RELAP5/Mod3.3(modified) for the University of Pisa. Three reference tests foreseen in the NACIE-UP benchmark and carried out at ENEA Brasimone Research Centre were analysed from four participants. The data from the post-test analyses, performed independently by the participant using different STH codes, were compared together and with the available experimental results and critically discussed

Exploitation of a natural pasture by wild horses: comparison between nutritive characteristics of the land and the nutrient requirements of the herds over a 2-year period

In the Molise region (Italy), some autochthonous populations are still bred and, between them, some wild horses named 'Pentro horses.' The breeding area is a natural pasture. It is 2200 ha extended including a broad plane surrounded by wooden hills. The aim of this research was to determine the nutritional characteristics of this area over a 2-year period to improve the management of the herd and to define the stocking rate in relation to the forage production in terms of production and quality. The forage samples were collected over two successive years during the grazing period (May to October) from five experimental areas and analysed for dry matter (DM), organic matter (OM), crude protein (CP), crude fibre (CF), neutral-detergent fibre (NDF), acid-detergent fibre (ADF), acid-detergent lignin (ADL) and gross energy (GE). Horse feed units (HFU) and horse-digestible crude protein (HDCP) were also predicted. Data were analysed with a one-way ANOVA test using month and area as factors. The DM, HFU and HDCP total production was determined to be compared with the total nutrient requirements of the herds from May to October. The results show that seasonal and yearly climatic variations significantly affect chemical composition and nutritive value of the pasture. The parameters most influenced were DM, CP, ADF and to a less extent NDF, while OM, ADL and GE show smaller differences during the observed period. The results show a low production per ha; nevertheless, because of the low stocking rate (0.3 to 0.6 head per ha), nutrient production meets the nutrient requirements of the horses regarding DM and energy. The differences among the areas have to be ascribed to the different botanical compositions and to the different draining capacity of the soil, and also in this case the greatest variations are for DM, CP and ADF

Pharmacogenetic considerations for optimizing tacrolimus dosing in liver and kidney transplant patients

The introduction of tacrolimus in clinical practice has improved patient survival after organ transplant. However, despite the long use of tacrolimus in clinical practice, the best way to use this agent is still a matter of intense debate. The start of the genomic era has generated new research areas, such as pharmacogenetics, which studies the variability of drug response in relation to the genetic factors involved in the processes responsible for the pharmacokinetics and/or the action mechanism of a drug in the body. This variability seems to be correlated with the presence of genetic polymorphisms. Genotyping is an attractive option especially for the initiation of the dosing of tacrolimus; also, unlike phenotypic tests, the genotype is a stable characteristic that needs to be determined only once for any given gene. However, prospective clinical studies must show that genotype determination before transplantation allows for better use of a given drug and improves the safety and clinical efficacy of that medication. At present, research has been able to reliably show that the CYP3A5 genotype, but not the CYP3A4 or ABCB1 ones, can modify the pharmacokinetics of tacrolimus. However, it has not been possible to incontrovertibly show that the corresponding changes in the pharmacokinetic profile are linked with different patient outcomes regarding tacrolimus efficacy and toxicity. For these reasons, pharmacogenetics and individualized medicine remain a fascinating area for further study and may ultimately become the face of future medical practice and drug dosing

Stability of viscous lubricated thin film down an inclined plane beneath ambient lighter non miscible static liquid.

This paper considers the stability of a thin film propagating beneath a large quantity of ambient static non miscible lighter liquid and over a sloping plane. Such configuration that has never been considered earlier can model the spill of a heavy hydrocarbon into the ocean by a tanker. Equations of conservation of the mass and the momentum were appropriately made non dimensional and a similar solution is proposed in this paper. In this way, an analytical expression of the hydrodynamic field, say velocity field and pressure field is provided. Then, the equation governing the spatiotemporal evolution of the water-oil interface was built and solved by a perturbation method. Also, the time evolution of the wave front position along the inclined plane was built. Finally, the effect of the control parameters on the linear stability of the flow was investigated

Raja asterias population assessment in FAO GFCM GSA17 area

Population structure and distribution of the starry ray, Raja asterias, were described based on data collected during yearly rapido trawl surveys (SoleMon), between 2005 and 2014 in the Northern and Central Adriatic Sea. A total of 306 individuals were caught, sex ratio was 1.04:1 in favor of males and length-weight relationships were obtained for the whole sample. Following the MEDITS scale, maturity was estimated, observing a higher number of immature individuals. Relative abundance significantly increased during the recent period with the highest values recorded at 5-30 m depths. Such increase could be related to the response of R. asterias to climatic change or to the decrease  in fishing pressure in the area. Clear spatial segregation of individuals depending on their life stage was observed, with immature individuals inhabiting the coastal areas and adults more abundant at depths greater than 40 m. The comparison of the result of the present study with MEDITS survey outcomes in terms of  distribution patterns, persistence areas of adults and juveniles and abundances indices, evidences that SoleMon survey seems to be more suitable in defining such features of the stock, likely due to the greater catchability of the rapido trawl in respect to the MEDITS trawl net. However, further investigations are needed to identify factors affecting the increasing abundance of this species, and develop an action plan for spatial management of fishing activities

Materials study to implement a 3D printer system to repair road pavement potholes

InfraRob is a research project funded by the European Commission's research programme Horizon 2020 that aims to maintain integrity, performance, and safety of the road infrastructure through autonomous robotized solutions and modularization. A specific task of the project is focused on the development of a system 3D printer able to extrude a specific mixture for filling in small cracks and potholes, to be integrated with an existing small autonomous carrier. The first step of the research deals with the definition of the optimal parameters of the system 3D printer/mixture, by studying in parallel the material design and the printer design. This paper presents the study performed on a mixture chosen among those commonly used for road potholes repair. The mixture is studied to achieve and balance the different conflicting performances: consistence, flowability homogeneity, and internal structure. In addition to the basic components, the use of special additives has also been explored to improve the plasticity and adhesivity of the mixture. The first phase of tests is conducted to define the main printing controls: i) Extrudability control: materials for 3D printing need to have an acceptable degree of extrudability, which is related to the capacity of a material to pass continuously through the printing head; ii) Flowability control, to ensure the mixture can be easy-pumpable in the delivery system and easy-usable on the crack or the pothole to be filed-in; iii) Setting time control: printing material requires a certain setting time to maintain a consistent flow rate for good extrudability, thus appropriate additives are needed to control the setting time. The second phase includes in situ tests to verify the compaction of the mixture under the traffic loads. The paper presents the results of the lab and in situ tests, and the features of the chosen mix, suitable to be managed by the 3D printer