Graphene based flexible electrochromic devices

Graphene emerges as a viable material for optoelectronics because of its broad optical response and gate-tunable properties. For practical applications, however, single layer graphene has performance limits due to its small optical absorption defined by fundamental constants. Here, we demonstrated a new class of flexible electrochromic devices using multilayer graphene (MLG) which simultaneously offers all key requirements for practical applications; high-contrast optical modulation over a broad spectrum, good electrical conductivity and mechanical flexibility. Our method relies on electro-modulation of interband transition of MLG via intercalation of ions into the graphene layers. The electrical and optical characterizations reveal the key features of the intercalation process which yields broadband optical modulation up to 55 per cent in the visible and near-infrared. We illustrate the promises of the method by fabricating reflective/transmissive electrochromic devices and multi-pixel display devices. Simplicity of the device architecture and its compatibility with the roll-to-roll fabrication processes, would find wide range of applications including smart windows and display devices. We anticipate that this work provides a significant step in realization of graphene based optoelectronics

Synthesis of Graphene on Gold

Here we report chemical vapor deposition of graphene on gold surface at ambient pressure. We studied effects of the growth temperature, pressure and cooling process on the grown graphene layers. The Raman spectroscopy of the samples reveals the essential properties of the graphene grown on gold surface. In order to characterize the electrical properties of the grown graphene layers, we have transferred them on insulating substrates and fabricated field effect transistors. Owing to distinctive properties of gold, the ability to grow graphene layers on gold surface could open new applications of graphene in electrochemistry and spectroscopy.Comment: 8 pages, 4 figure

Analysis of Public Transport System, Hatay Example: Detection of Existing System

Today, with the development of our cities, the population density has increased and therefore many problems have arisen due to the increase of the traffic density in the city and the existing transportation systems which were previously not planned with erroneous technical infrastructure have become unable to answer. Measurements of the decision variables related to the routes, vehicles and passengers are made in order to determine the existing public transport system. These decision variables include the number of vehicles leaving service during the day, the passenger carrying capacity of the vehicles, the starting and ending times of the laps, the length of the public transport line, the number of laps made during the day, the number of passengers per vehicle, and the total number of passengers. By using these variables, the structure of the existing public transportation system is determined. Increasing the quality of public transport services in metropolitan cities and raising the quality of users in more economical conditions is only possible by incorporating business activities into an institutional structure, integrating public transportation enterprises into one and planning and managing them in a unified way. Our aim in this study is to evaluate the existing route structures, vehicle types and travel analyzes in the public transportation system in Hatay Province and evaluate the positive and negative points in the developing urban structure and to transform them into an effective and sustainable structure

Graphene-enabled electrically switchable radar-absorbing surfaces

Radar-absorbing materials are used in stealth technologies for concealment of an object from radar detection. Resistive and/or magnetic composite materials are used to reduce the backscattered microwave signals. Inability to control electrical properties of these materials, however, hinders the realization of active camouflage systems. Here, using large-area graphene electrodes, we demonstrate active surfaces that enable electrical control of reflection, transmission and absorption of microwaves. Instead of tuning bulk material property, our strategy relies on electrostatic tuning of the charge density on an atomically thin electrode, which operates as a tunable metal in microwave frequencies. Notably, we report large-area adaptive radar-absorbing surfaces with tunable reflection suppression ratio up to 50 dB with operation voltages <5 V. Using the developed surfaces, we demonstrate various device architectures including pixelated and curved surfaces. Our results provide a significant step in realization of active camouflage systems in microwave frequencies. © 2015 Macmillan Publishers Limited. All rights reserved

Effect of different defoliants and application times on the yield and quality components of cotton in semi-arid conditions

This study was conducted to determine the effect of different defoliants (Dropp ultra&#174; (DU): thidiazuron+diuron and Roundup (RU): glyphosate) and application times [60, 75 and 90 days after flowering (DAF)] on cotton. The research was carried out at the Harran University, Faculty of Agriculture Research and Application Center in 2001 and 2002 using cotton variety cv. Stoneville-453. Experiments were arranged as split plot design with three replications. Defoliations were at the main plots and application times at the subplots. Experimental plots were consisted of six rows, 10 m in length, interrow was 0.70 m and intra-row spacing was 0.20 m. The results of the study indicated that the application of DU defoliant at 60 days after flowering reduced seed cotton yield, number of bolls, boll weight and lint index. With this, seed cotton yield, number of bolls, boll weight and lint index increased with delayed defoliation time in both years. Also, there were no statistically significant differences between the treatments in terms of ginning outturn, fiber length, fiber strength and fiber fineness. It was also found that the application of 2000 cc ha-1 RU was not enough as a dose to affect leaf defoliation and other investigated components

Synthesis of Large Area Graphene for High Performance in Flexible Optoelectronic Devices

This work demonstrates an attractive low-cost route to obtain large area and high-quality graphene films by using the ultra-smooth copper foils which are typically used as the negative electrodes in lithium-ion batteries. We first compared the electronic transport properties of our new graphene film with the one synthesized by using commonly used standard copper foils in chemical vapor deposition (CVD). We observed a stark improvement in the electrical performance of the transistors realized on our graphene films. To study the optical properties on large area, we transferred CVD based graphene to transparent flexible substrates using hot lamination method and performed large area optical scanning. We demonstrate the promise of our high quality graphene films for large areas with ∼400 cm 2 flexible optical modulators. We obtained a profound light modulation over a broad spectrum by using the fabricated large area transparent graphene supercapacitors and we compared the performance of our devices with the one based on graphene from standard copper. We propose that the copper foils used in the lithium-ion batteries could be used to obtain high-quality graphene at much lower-cost, with the improved performance of electrical transport and optical properties in the devices made from them

AUTOMATIC EXTRACTION OF SURFACE DYNAMICS USING GOOGLE EARTH ENGINE FOR UNDERSTANDING DROUGHT PHENOMENON

Atmospheric drought due to meteorological events occurring out of seasonal norms, and consequent droughts in agriculture and wetlands cause great damage to the ecological balance. The initial effects of this situation appear on a local scale, while the aftereffects, which last for years, appear on a global scale. Monitoring and detecting drought with remote sensing technologies can contribute to the management of water resources and forest areas and enable many measures to be taken to reduce the effects of drought. Within the scope of this study, a system that automatically performs the extraction of different drought parameters depending on years has been developed. Işıklı Lake was selected as the study area and the change of water areas over the years has been extracted from satellite images. With the system developed on the Google Earth Engine platform, different parameters were analyzed over a 13-year period and their consistency was tested. As a result, it is seen that the water areas in the lake decreased by 30% between 2010 and 2022. Likewise, the systematic decrease in the parameters, especially in 2015 and afterward, indicates the drought in the region. With the proposed automatic system, it is thought that early precautions can be taken for drought scenarios that may occur in larger-scale regions

Dynamic phase transition properties and hysteretic behavior of a ferrimagnetic core-shell nanoparticle in the presence of a time dependent magnetic field

We have presented dynamic phase transition features and stationary-state behavior of a ferrimagnetic small nanoparticle system with a core-shell structure. By means of detailed Monte Carlo simulations, a complete picture of the phase diagrams and magnetization profiles have been presented and the conditions for the occurrence of a compensation point $T_{comp}$ in the system have been investigated. According to N\'{e}el nomenclature, the magnetization curves of the particle have been found to obey P-type, N-type and Q-type classification schemes under certain conditions. Much effort has been devoted to investigation of hysteretic response of the particle and we observed the existence of triple hysteresis loop behavior which originates from the existence of a weak ferromagnetic core coupling $J_{c}/J_{sh}$, as well as a strong antiferromagnetic interface exchange interaction $J_{int}/J_{sh}$. Most of the calculations have been performed for a particle in the presence of oscillating fields of very high frequencies and high amplitudes in comparison with exchange interactions which resembles a magnetic system under the influence of ultrafast switching fields. Particular attention has also been paid on the influence of the particle size on the thermal and magnetic properties, as well as magnetic features such as coercivity, remanence and compensation temperature of the particle. We have found that in the presence of ultrafast switching fields, the particle may exhibit a dynamic phase transition from paramagnetic to a dynamically ordered phase with increasing ferromagnetic shell thickness.Comment: 12 pages, 12 figure