Bond strength of plasma sprayed ceramic coatings on the phosphated steels

In the presented work, results of adhesion measurements for different systems of steel sheet-phosphate interlayer-ceramiccoating are described. The interlayers were produced by zinc phosphating; alumina, olivine and zirconiasilica-alumina (e.g. eucor) coatings were deposited by water stabilized plasma torch WSP®. However, successful application of the WSP technique depends on the choice of correct deposition parameters preserving the hydrated phosphates from thermal destruction by the molten ceramic particles. For the adhesion measurement ISO 4624standardized test was used. Corrosion resistivity was measured by polarisation resistance and free corrosion potential in 3 % NaCl solution. Key words

Modelling of Radiative Transfer in Air Arc Plasma

The objective of this work is to compare the accuracy of several approximate models of radiative properties for the prediction of radiative transfer in air arc plasma at the temperatures in the range of 300 - 25 000 K and the pressure of 0.1 MPa. Calculated absorption coefficients are used to generate the parameters of different models. The radiative transfer inside the cylindrically symmetrical air plasma with prescribed temperature profile was studied. The equation of radiative transfer was solved using the P1 and SP3 approximations, calculated radiative source term in the energy equation (net emission) was compared with results obtained by spectral integration

Corrosion properties of chromia based eco - friendly coatings on mild steel

Ceramic nanocrystalline coatings of chromium oxide (III) on steel S235JRH-1.0038 (EN 10025-1) were prepared using the liquid precursor plasma spraying (LPPS) method from ammonia dichromate (VI). Their structure and anti – corrosion properties were compared to the standard chromium oxide (III) coating prepared by thermal spraying. The newly prepared coatings had very high adhesion and minimal porosity. Anticorrosion properties were characterized by the means of the electrochemical impedance spectroscopy (EIS), measuring the charge transfer resistance Rct and capacitance of electrical double layer CPEdl in the 0,5 mol/l NaCl. Coatings of Cr2 O3 prepared by the LPPS method showed unambiguously improved anti - corrosion properties

Incorporation of tungsten metal fibers in a metal and ceramic matrix

Tungsten fibers have high tensile strength but a poor oxidation resistance at elevated temperatures. Using this first characteristic and to prevent oxidation of tungsten coated composite materials in which the primary requirement: reinforcement against destruction or deformation, was studied on tungsten fibers and tungsten wires which were coated by applying the metal and ceramic powders via plasma spraying device in plasma generator WSP®. Deposition took place in an atmosphere of Ar + 7 % H2, sufficient to reduce the oxidized trace amounts of tungsten