The rf control and detection system for PACO the parametric converter detector

In this technical note the rf control and detection system for a detector of small harmonic displacements based on two coupled microwave cavities (PACO) is presented. The basic idea underlying this detector is the principle of parametric power conversion between two resonant modes of the system, stimulated by the (small) harmonic modulation of one system parameter. In this experiment we change the cavity length applying an harmonic voltage to a piezo-electric crystal. The system can achieve a great sensitivity to small harmonic displacements and can be an interesting candidate for the detection of small, mechanically coupled, interactions (e.g. high frequency gravitational waves).Comment: 13 pages, 4 postscript figure

A detector of small harmonic displacements based on two coupled microwave cavities

The design and test of a detector of small harmonic displacements is presented. The detector is based on the principle of the parametric conversion of power between the resonant modes of two superconducting coupled microwave cavities. The work is based on the original ideas of Bernard, Pegoraro, Picasso and Radicati, who, in 1978, suggested that superconducting coupled cavities could be used as sensitive detectors of gravitational waves, and on the work of Reece, Reiner and Melissinos, who, {in 1984}, built a detector of this kind. They showed that an harmonic modulation of the cavity length l produced an energy transfer between two modes of the cavity, provided that the frequency of the modulation was equal to the frequency difference of the two modes. They achieved a sensitivity to fractional deformations of dl/l~10^{-17} Hz^{-1/2}. We repeated the Reece, Reiner and Melissinos experiment, and with an improved experimental configuration and better cavity quality, increased the sensitivity to dl/l~10^{-20} Hz^{-1/2}. In this paper the basic principles of the device are discussed and the experimental technique is explained in detail. Possible future developments, aiming at gravitational waves detection, are also outlined.Comment: 28 pages, 12 eps figures, ReVteX. \tightenlines command added to reduce number of pages. The following article has been accepted by Review of Scientific Instruments. After it is published, it will be found at http://link.aip.org/link/?rs

Parametric gravity wave detector

Since 1978 superconducting coupled cavities have been proposed as a sensitive detector of gravitational waves. The interaction of the gravitational wave with the cavity walls, and the esulting motion, induces the transition of some energy from an initially excited cavity mode to an empty one. The energy transfer is maximum when the frequency of the wave is equal to the frequency difference of the two cavity modes. In 1984 Reece, Reiner and Melissinos built a detector of the type proposed, and used it as a transducer of harmonic mechanical motion, achieving a sensitivity to fractional deformations of the order dx/x ~ 10^(-18). In this paper the working principles of the detector are discussed and the last experimental results summarized. New ideas for the development of a realistic gravitational waves detector are considered; the outline of a possible detector design and its expected sensitivity are also shown.Comment: 9 pages, 6 figures. Talk given at the Workshop on Electromagnetic Probes of Fundamentals Physics, Erice (Italy), October 200

A detector of gravitational waves based on coupled microwave cavities

Since 1978 superconducting coupled cavities have been proposed as sensitive detector of gravitational waves. The interaction of the gravitational wave with the cavity walls, and the resulting motion, induces the transition of some electromagnetic energy from an initially excited cavity mode to an empty one. The energy transfer is maximum when the frequency of the wave is equal to the frequency difference of the two cavity modes. In this paper the basic principles of the detector are discussed. The interaction of a gravitational wave with the cavity walls is studied in the proper reference frame of the detector, and the coupling between two electromagnetic normal modes induced by the wall motion is analyzed in detail. Noise sources are also considered; in particular the noise coming from the brownian motion of the cavity walls is analyzed. Some ideas for the developement of a realistic detector of gravitational waves are discussed; the outline of a possible detector design and its expected sensitivity are also shown.Comment: 29 pages, 12 eps figures. Typeset by REVTe

Two Coupled Superconducting Cavities as a Gravitational Wave Detector: First Experimental Results

First experimental results of a feasibility study of a gravitational wave detector based on two coupled superconducting cavities are presented. Basic physical principles underlying the detector behaviour and sensitivity limits are discussed. The detector layout is described in detail and its rf properties are showed. The limit sensitivity to small harmonic displacements at the detection frequency (around 1 MHz) is showed. The system performance as a potential g.w. detector is discussed and future developments are foreseen.Comment: 7 pages, 3 figures. Presented at the 9th Workshop on RF Superconductivity, November 1-5, 1999, Santa Fe, New Mexico, US

Some Mathematical and Numerical Aspects inAluminum Production

In this paper, we present a mathematical modeling of some magnetohydrodynamic effects arising in an aluminum production cell as well as its numerical approximation by a finite element method. We put the emphasis on the magnetic effects which live in the whole three dimensional space and which are solved numerically with a domain decomposition metho

Microwave apparatus for gravitational waves observation

In this report the theoretical and experimental activities for the development of superconducting microwave cavities for the detection of gravitational waves are presented.Comment: 42 pages, 28 figure

Don't forget the jumper's knee in the young sportsman: evaluation of patellar tendinopathy with a high frequency ultrasound probe.

8Patellar tendinopathy, or Jumper's knee, is a painful knee condition caused by inflammation of the patella tendon. This condition is most frequently observed in subjects who play sports that require repetitive regular jumping. Jumper's knee is frequently misdiagnosed as a minor injury and many athletes, like our patient, keep on training and competing and either tend to ignore the injury or attempt to treat it themselves. However, jumper's knee is a serious condition that requires a correct and timely diagnosis, which often necessitates ultrasound investigation in order to start the most appropriate treatment.openopenRuaro B; Cutolo M; Alessandri E; Zaottini F; Picasso R; Pistoia F; Ferrari G; Martinoli C.Ruaro, B; Cutolo, M; Alessandri, E; Zaottini, F; Picasso, R; Pistoia, F; Ferrari, G; Martinoli, C

Determining Ratios of WIMP-Nucleon Cross Sections from Direct Dark Matter Detection Data

Weakly Interacting Massive Particles (WIMPs) are one of the leading candidates for Dark Matter. So far the usual procedure for constraining the WIMP-nucleon cross sections in direct Dark Matter detection experiments have been to fit the predicted event rate based on some model(s) of the Galactic halo and of WIMPs to experimental data. One has to assume whether the spin-independent (SI) or the spin-dependent (SD) WIMP-nucleus interaction dominates, and results of such data analyses are also expressed as functions of the as yet unknown WIMP mass. In this article, I introduce methods for extracting information on the WIMP-nucleon cross sections by considering a general combination of the SI and SD interactions. Neither prior knowledge about the local density and the velocity distribution of halo WIMPs nor about their mass is needed. Assuming that an exponential-like shape of the recoil spectrum is confirmed from experimental data, the required information are only the measured recoil energies (in low energy ranges) and the number of events in the first energy bin from two or more experiments.Comment: 33 pages, 20 eps figures; v2: typos fixed, references added and updated, revised version for publicatio