Incorporating the Use of a Fouling Model in the Design and Operation of Cooling Networks

The importance of knowing how fouling develops and deteriorates the thermal-hydraulic performance of heat transfer processes becomes evident when the problem is already there and is difficult to eliminate. Fouling prediction is importantin grassroot design and even more, in retrofit applications. The aim of the present work is to show the use of a fouling model to predict scaling in cooling systems in order to derive design guidelines. Fluid temperature and velocity are the two more important variables that determine the rate at which scaling takes places. This work focuses on retrofit of existing cooling systems for situations where new heat exchangers need to be incorporated into the network. It is shown how the pressure drop, fluid velocity and flow distribution are affected depending on the decision of where to place the new exchangers. All these factors are intimately related to the development of fouling. The model presented in this work includes the prediction with timeof the increase of pressure drop and flow redistribution as fouling builds up. The use of the model is illustrated through a case study that shows that in the retrofit ofcooling systems,the incorporation of new heat exchangers in parallel is recommended

Use of Heat Transfer Enhancement Techniques in the Design of Heat Exchangers

Heat transfer enhancement refers to application of basic concepts of heat transfer processes to improve the rate of heat removal or deposition on a surface. In the flow of a clean fluid through the tube of a heat exchanger, the boundary layer theorem establishes that a laminar sublayer exists where the fluid velocity is minimal. Heat transfer through this stagnant layer is mainly dominated by thermal conduction, becoming the major resistance to heat transfer. From an engineering point of view, heat transfer can be enhanced if this stagnant layer is partially removed or eliminated. In single-phase heat transfer processes, three options are available to increase the heat transfer rate. One of them is the choice of smaller free flow sectional area for increased fluid velocity bringing about a reduction of the thickness of the laminar sublayer. A second option is the engineering of new surfaces which cause increased local turbulence, and the third option consists in the use of mechanical inserts that promote local turbulence. The application of these alternatives is limited by the pressure drop. This chapter describes the concept of heat transfer enhancement and the ways it is applied to the development of new heat exchanger technology

Exhaust Gas Heat Recovery for an ORC: A Case Study

This work aims at developing a heat exchanger (HEX) sizing approach considering the need to maximize the heat recovery within the limitations of pressure drop and space. The application consists in the recovery of the energy contained in exhaust gases coming from an internal combustion engine (ICE). Two heat exchanger geometries are selected as case studies. The design approach involves the application of design of experiments (DOE) techniques and computational fluid dynamics (CFD) simulations. DOE techniques are used to observe the influence of some selected parameters (factors) in the design of the heat exchangers, and CFD simulations are carried out to determine the performance of the heat exchanger. The information obtained is used to determine local Nusselt number correlations that are used for the design of the heat exchangers

Differences in the clinical and hormonal presentation of patients with familial and sporadic primary aldosteronism

Purpose: To compare the clinical and hormonal characteristics of patients with familial hyperaldosteronism (FH) and sporadic primary aldosteronism (PA). Methods: A systematic review of the literature was performed for the identification of FH patients. The SPAIN-ALDO registry cohort of patients with no suspicion of FH was chosen as the comparator group (sporadic group). Results: A total of 360 FH (246 FH type I, 73 type II, 29 type III, and 12 type IV) cases and 830 sporadic PA patients were included. Patients with FH-I were younger than sporadic cases, and women were more commonly affected (P = 0.003). In addition, the plasma aldosterone concentration (PAC) was lower, plasma renin activity (PRA) higher, and hypokalemia (P < 0.001) less frequent than in sporadic cases. Except for a younger age (P < 0.001) and higher diastolic blood pressure (P = 0.006), the clinical and hormonal profiles of FH-II and sporadic cases were similar. FH-III had a distinct phenotype, with higher PAC and higher frequency of hypokalemia (P < 0.001), and presented 45 years before sporadic cases. Nevertheless, the clinical and hormonal phenotypes of FH-IV and sporadic cases were similar, with the former being younger and having lower serum potassium levels. Conclusion: In addition to being younger and having a family history of PA, FH-I and III share other typical characteristics. In this regard, FH-I is characterized by a low prevalence of hypokalemia and FH-III by a severe aldosterone excess causing hypokalemia in more than 85% of patients. The clinical and hormonal phenotype of type II and IV is similar to the sporadic case

Base de datos de abejas ibéricas

Las abejas son un grupo extremadamente diverso con más de 1000 especies descritas en la península ibérica. Además, son excelentes polinizadores y aportan numerosos servicios ecosistémicos fundamentales para la mayoría de ecosistemas terrestres. Debido a los diversos cambios ambientales inducidos por el ser humano, existen evidencias del declive de algunas de sus poblaciones para ciertas especies. Sin embargo, conocemos muy poco del estado de conservación de la mayoría de especies y de muchas de ellas ignoramos cuál es su distribución en la península ibérica. En este trabajo presentamos un esfuerzo colaborativo para crear una base de datos de ocurrencias de abejas que abarca la península ibérica e islas Baleares que permitirá resolver cuestiones como la distribución de las diferentes especies, preferencia de hábitat, fenología o tendencias históricas. En su versión actual, esta base de datos contiene un total de 87 684 registros de 923 especies recolectados entre 1830 y 2022, de los cuales un 87% presentan información georreferenciada. Para cada registro se incluye información relativa a la localidad de muestreo (89%), identificador y colector de la especie (64%), fecha de captura (54%) y planta donde se recolectó (20%). Creemos que esta base de datos es el punto de partida para conocer y conservar mejor la biodiversidad de abejas en la península ibérica e Islas Baleares. Se puede acceder a estos datos a través del siguiente enlace permanente: https://doi.org/10.5281/zenodo.6354502ABSTRACT: Bees are a diverse group with more than 1000 species known from the Iberian Peninsula. They have increasingly received special attention due to their important role as pollinators and providers of ecosystem services. In addition, various rapid human-induced environmental changes are leading to the decline of some of its populations. However, we know very little about the conservation status of most species and for many species, we hardly know their true distributions across the Iberian Peninsula. Here, we present a collaborative effort to collate and curate a database of Iberian bee occurrences to answer questions about their distribution, habitat preference, phenology, or historical trends. In total we have accumulated 87 684 records from the Iberian Peninsula and the Balearic Islands of 923 different species with 87% of georeferenced records collected between 1830 and 2022. In addition, each record has associated information such as the sampling location (89%), collector and person who identified the species (64%), date of the capture (54%) and plant species where the bees were captured (20%). We believe that this database is the starting point to better understand and conserve bee biodiversity in the Iberian Peninsula. It can be accessed at: https://doi.org/10.5281/zenodo.6354502Esta base de datos se ha realizado con la ayuda de los proyectos EUCLIPO (Fundação para a Ciência e a Tecnologia, LISBOA-01-0145-FEDER-028360/EUCLIPO) y SAFEGUARD (ref. 101003476 H2020 -SFS-2019-2).info:eu-repo/semantics/publishedVersio

La renovación de la palabra en el bicentenario de la Argentina : los colores de la mirada lingüística

El libro reúne trabajos en los que se exponen resultados de investigaciones presentadas por investigadores de Argentina, Chile, Brasil, España, Italia y Alemania en el XII Congreso de la Sociedad Argentina de Lingüística (SAL), Bicentenario: la renovación de la palabra, realizado en Mendoza, Argentina, entre el 6 y el 9 de abril de 2010. Las temáticas abordadas en los 167 capítulos muestran las grandes líneas de investigación que se desarrollan fundamentalmente en nuestro país, pero también en los otros países mencionados arriba, y señalan además las áreas que recién se inician, con poca tradición en nuestro país y que deberían fomentarse. Los trabajos aquí publicados se enmarcan dentro de las siguientes disciplinas y/o campos de investigación: Fonología, Sintaxis, Semántica y Pragmática, Lingüística Cognitiva, Análisis del Discurso, Psicolingüística, Adquisición de la Lengua, Sociolingüística y Dialectología, Didáctica de la lengua, Lingüística Aplicada, Lingüística Computacional, Historia de la Lengua y la Lingüística, Lenguas Aborígenes, Filosofía del Lenguaje, Lexicología y Terminología

Physical Dimensions as a Design Objective in Heat Transfer Equipment: The Case of Plate and Fin Heat Exchangers

To incorporate exchanger dimensions as a design objective in plate and fin heat exchangers, a variable that must be taken into consideration is the geometry of the finned surfaces to be used. In this work, a methodology to find the surface geometry that will produce the required heat transfer coefficient and pressure drop to achieve the design targets was developed. The geometry of secondary surfaces can be specified by the fin density, which represents the number of fins per unit length. All other geometrical features, as well as the thermo-hydraulic performance, can be derived from this parameter. This work showed the way finned surfaces are engineered employing generalised thermo-hydraulic correlations as a part of a design methodology. It also showed that there was a volume space referred to as volume design region (VDR) where heat duty, pressure drop, and dimensions could simultaneously be met. Such a volume design region was problem- and surface-specific; therefore, its limits were determined by the heat duty, the pressure drop, and the type of finned surface chosen in the design. The application of this methodology to a case study showed that a shell and tube heat exchanger of 227.4 m2, with the appropriate fin density using offset strip-fins, could be replaced by a plate and fin exchanger with any combination of height, width, and length in the ranges of 0–0.58 m, 0–0.58 m, and 0–3.59 m. The approach presented in this work indicated that heat exchanger dimensions could be fixed as a design objective, and they could effectively be achieved through surface design