12,575 research outputs found
“Perversity, Futility, Jeopardy”: An Economic Analysis of the Attack on Gun Control
A relatively new way for utilizing the thermal performance of heat pipes is to use nanofluids as working fluids in the heat pipes. Heat pipes are effective heat transfer devices in which the nanofluid operates in the two phases, evaporation and condensation. The heat pipe transfers the heat supplied in e.g. a laptop, from the evaporator to condenser part. Nanofluids are mixtures consisting of nanoparticles (e.g. nano-sized silver particles) and a base fluid (e.g. water). The aim of this bachelor’s thesis has been to examine the effect of nanofluids on heat pipes on the subject of temperature parameters and thermal resistance in the heat pies, through findings in literature and an applied model. The study, based on literature and an applied model, found that higher particle conductivity and higher concentration of nanoparticles consequently decrease the thermal resistance in the heat pipes, resulting in an enhanced thermal performance of the heat pipes with nanofluids as working fluids. It is however concluded that difficulties in finding the optimal synthesis of nanofluids, the concentration level of nanoparticles and the filling ratio of nanofluids in heat pipes, set bounds to the commercial use of nanofluids in heat pipes. It is suggested that, in order to enhance the heat transfer performance of nanofluids in heat pipes, to conduct further research concerning e.g. synthesis of nanofluids and concentration level of nanoparticles in nanofluids
The Assassin Bug \u3ci\u3eZelus Luridus\u3c/i\u3e (Heteroptera: Reduviidae) in Michigan\u27s Upper Peninsula
(excerpt)
On 17 July 1992, an assassin bug (Zelus luridus Stal) was flushed from the stomach of a smallmouth bass (Micropterus dolomieu) collected in West Long Lake of the University of Notre Dame Environmental Research Center, Gogebic County, Michigan
Recommended from our members
Fluctuating thermal environments of shallow-water rocky reefs in the Gulf of California, Mexico.
As part of a broad-scale study of the biogeography of rocky reefs in the Gulf of California, Mexico (GOC), we collected a continuous 1-yr temperature time series at ~5 m water depth at 16 sites spanning 5° of latitude and ~700 km along the western boundary of the basin. Throughout the region, thermal conditions were most variable in summer with fluctuations concentrated at diurnal and semi-diurnal frequencies, likely associated with solar and wind forcing and vertical water column oscillations forced by internal waves. Temperatures in winter were less variable than in summer, and minimum temperatures also differed among sites. Thermal variability integrated across the diurnal and semi-diurnal frequency bands was greatest near the Midriff Islands in the northern GOC and decreased toward the southern sites. Diurnal variability was greater than semi-diurnal variability at 13 of the 16 sites. A statistic-of-extremes analysis indicated shortest return times for cooling events in summer, and reef organisms at many of the sites may experience anomalous 2 to 5 °C cooling events multiple times per month. The significant extent of local temperature variability may play important roles in limiting species occurrences among sites across this biogeographic region
Superhumps in Low-Mass X-Ray Binaries
We propose a mechanism for the superhump modulations observed in optical
photometry of at least two black hole X-ray transients (SXTs). As in extreme
mass-ratio cataclysmic variables (CVs), superhumps are assumed to result from
the presence of the 3:1 orbital resonance in the accretion disc. This causes
the disc to become non-axisymmetric and precess. However the mechanism for
superhump luminosity variations in low mass X-ray binaries (LMXBs) must differ
from that in CVs, where it is attributed to a tidally-driven modulation of the
disc's viscous dissipation, varying on the beat between the orbital and disc
precession period. By contrast in LMXBs, tidal dissipation in the outer
accretion disc is negligible: the optical emission is overwhelming dominated by
reprocessing of intercepted central X-rays. Thus a different origin for the
superhump modulation is required. Recent observations and numerical simulations
indicate that in an extreme mass-ratio system the disc area changes on the
superhump period. We deduce that the superhumps observed in SXTs arise from a
modulation of the reprocessed flux by the changing area. Therefore, unlike the
situation in CVs, where the superhump amplitude is inclination-independent,
superhumps should be best seen in low-inclination LMXBs, whereas an orbital
modulation from the heated face of the secondary star should be more prominent
at high inclinations. Modulation at the disc precession period (10s of days)
may indicate disc asymmetries such as warping. We comment on the orbital period
determinations of LMXBs, and the possibility and significance of possible
permanent superhump LMXBs.Comment: 6 pages, 1 encapsulated figure. MNRAS in press; replaced to correct
typographical error
Thermal analysis of high-bandwidth and energy-efficient 980 nm VCSELs with optimized quantum well gain peak-to-cavity resonance wavelength offset
This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 111, 243508 (2017) and may be found at https://doi.org/10.1063/1.5003288.The static and dynamic performance of vertical-cavity surface-emitting lasers (VCSELs) used as light-sources for optical interconnects is highly influenced by temperature. We study the effect of temperature on the performance of high-speed energy-efficient 980 nm VCSELs with a peak wavelength of the quantum well offset to the wavelength of the fundamental longitudinal device cavity mode so that they are aligned at around 60 °C. A simple method to obtain the thermal resistance of the VCSELs as a function of ambient temperature is described, allowing us to extract the active region temperature and the temperature dependence of the dynamic and static parameters. At low bias currents, we can see an increase of the −3 dB modulation bandwidth f−3dB with increasing active region temperature, which is different from the classically known situation. From the detailed analysis of f−3dB versus the active region temperature, we obtain a better understanding of the thermal limitations of VCSELs, giving a basis for next generation device designs with improved temperature stability
STRUCTURAL ADJUSTMENT IN OECD AGRICULTURE: GOVERNMENT POLICIES AND TECHNICAL CHANGE
Agricultural and Food Policy, Research and Development/Tech Change/Emerging Technologies,
Visual Acuity does not Moderate Effect Sizes of Higher-Level Cognitive Tasks.
Background/study contextDeclining visual capacities in older adults have been posited as a driving force behind adult age differences in higher-order cognitive functions (e.g., the "common cause" hypothesis of Lindenberger & Baltes, 1994, Psychology and Aging, 9, 339-355). McGowan, Patterson, and Jordan (2013, Experimental Aging Research, 39, 70-79) also found that a surprisingly large number of published cognitive aging studies failed to include adequate measures of visual acuity. However, a recent meta-analysis of three studies (La Fleur and Salthouse, 2014, Psychonomic Bulletin & Review, 21, 1202-1208) failed to find evidence that visual acuity moderated or mediated age differences in higher-level cognitive processes. In order to provide a more extensive test of whether visual acuity moderates age differences in higher-level cognitive processes, we conducted a more extensive meta-analysis of topic.MethodsUsing results from 456 studies, we calculated effect sizes for the main effect of age across four cognitive domains (attention, executive function, memory, and perception/language) separately for five levels of visual acuity criteria (no criteria, undisclosed criteria, self-reported acuity, 20/80-20/31, and 20/30 or better).ResultsAs expected, age had a significant effect on each cognitive domain. However, these age effects did not further differ as a function of visual acuity criteria.ConclusionThe current meta-analytic, cross-sectional results suggest that visual acuity is not significantly related to age group differences in higher-level cognitive performance-thereby replicating La Fleur and Salthouse (2014). Further efforts are needed to determine whether other measures of visual functioning (e.g., contrast sensitivity, luminance) affect age differences in cognitive functioning
Adjusting for bias introduced by instrumental variable estimation in the Cox Proportional Hazards Model
Instrumental variable (IV) methods are widely used for estimating average
treatment effects in the presence of unmeasured confounders. However, the
capability of existing IV procedures, and most notably the two-stage residual
inclusion (2SRI) procedure recommended for use in nonlinear contexts, to
account for unmeasured confounders in the Cox proportional hazard model is
unclear. We show that instrumenting an endogenous treatment induces an
unmeasured covariate, referred to as an individual frailty in survival analysis
parlance, which if not accounted for leads to bias. We propose a new procedure
that augments 2SRI with an individual frailty and prove that it is consistent
under certain conditions. The finite sample-size behavior is studied across a
broad set of conditions via Monte Carlo simulations. Finally, the proposed
methodology is used to estimate the average effect of carotid endarterectomy
versus carotid artery stenting on the mortality of patients suffering from
carotid artery disease. Results suggest that the 2SRI-frailty estimator
generally reduces the bias of both point and interval estimators compared to
traditional 2SRI.Comment: 27 pages, 8 figures, 4 table
High efficiency magnetic bearings
Research activities concerning high efficiency permanent magnet plus electromagnet (PM/EM) pancake magnetic bearings at the University of Maryland are reported. A description of the construction and working of the magnetic bearing is provided. Next, parameters needed to describe the bearing are explained. Then, methods developed for the design and testing of magnetic bearings are summarized. Finally, a new magnetic bearing which allows active torque control in the off axes directions is discussed
- …