Intelligent sampling for the measurement of structured surfaces

Uniform sampling in metrology has known drawbacks such as coherent spectral aliasing and a lack of efficiency in terms of measuring time and data storage. The requirement for intelligent sampling strategies has been outlined over recent years, particularly where the measurement of structured surfaces is concerned. Most of the present research on intelligent sampling has focused on dimensional metrology using coordinate-measuring machines with little reported on the area of surface metrology. In the research reported here, potential intelligent sampling strategies for surface topography measurement of structured surfaces are investigated by using numerical simulation and experimental verification. The methods include the jittered uniform method, low-discrepancy pattern sampling and several adaptive methods which originate from computer graphics, coordinate metrology and previous research by the authors. By combining the use of advanced reconstruction methods and feature-based characterization techniques, the measurement performance of the sampling methods is studied using case studies. The advantages, stability and feasibility of these techniques for practical measurements are discussed

Clubbing masculinities: Gender shifts in gay men's dance floor choreographies

This is an Author's Accepted Manuscript of an article published in Journal of Homosexuality, 58(5), 608-625, 2011 [copyright Taylor & Francis], available online at: http://www.tandfonline.com/10.1080/00918369.2011.563660This article adopts an interdisciplinary approach to understanding the intersections of gender, sexuality, and dance. It examines the expressions of sexuality among gay males through culturally popular forms of club dancing. Drawing on political and musical history, I outline an account of how gay men's gendered choreographies changed throughout the 1970s, 80s, and 90s. Through a notion of “technologies of the body,” I situate these developments in relation to cultural levels of homophobia, exploring how masculine expressions are entangled with and regulated by musical structures. My driving hypothesis is that as perceptions of cultural homophobia decrease, popular choreographies of gay men's dance have become more feminine in expression. Exploring this idea in the context of the first decade of the new millennium, I present a case study of TigerHeat, one of the largest weekly gay dance club events in the United States

Political Trust and Job Insecurity in 18 European Polities

Several decades of trust research has confirmed that difficult national economic conditions help explain citizens’ low levels of political trust. But research points to a much less important role for personal economic factors. The latter finding, it is argued here, is a result of flawed survey questions and model misspecification. We actually know very little about the precise economic concerns that may generate low levels of trust and about the mechanisms via which they do so, resulting in a rather thin causal story. This paper seeks to address this lacuna, focusing on an issue of increasing importance in advanced economies: job insecurity. Using individual-level data from 18 European polities at two different time points, the paper finds that job insecurity generates lower levels of trust in politicians, political parties and political institutions and lower levels of satisfaction with democratic performance. Importantly, job insecurity’s effect does not diminish as one moves from specific to more diffuse objects of political trust, as previous research suggests it should. The paper also finds that the effect of job insecurity is exacerbated if citizens have negative perceptions of the performance of the wider economy. Finally, and drawing on the occupational psychology literature, the paper proposes a novel causal mechanism to link job insecurity to political trust. The intuition is that job insecurity violates a ‘psychologicaldemocratic’ trust contract between workers and the state. The mechanism is consistent with the observed results. The paper thus contributes to both the empirical and theoretical debates on the linkages between political trust and economic performance

Photochemistry of Furyl- and Thienyldiazomethanes: Spectroscopic Characterization of Triplet 3-Thienylcarbene

Photolysis (λ \u3e 543 nm) of 3-thienyldiazomethane (1), matrix isolated in Ar or N2 at 10 K, yields triplet 3-thienylcarbene (13) and α-thial-methylenecyclopropene (9). Carbene 13 was characterized by IR, UV/vis, and EPR spectroscopy. The conformational isomers of 3-thienylcarbene (s-E and s-Z) exhibit an unusually large difference in zero-field splitting parameters in the triplet EPR spectrum (|D/hc| = 0.508 cm–1, |E/hc| = 0.0554 cm–1; |D/hc| = 0.579 cm–1, |E/hc| = 0.0315 cm–1). Natural Bond Orbital (NBO) calculations reveal substantially differing spin densities in the 3-thienyl ring at the positions adjacent to the carbene center, which is one factor contributing to the large difference in D values. NBO calculations also reveal a stabilizing interaction between the sp orbital of the carbene carbon in the s-Z rotamer of 13 and the antibonding σ orbital between sulfur and the neighboring carbon—an interaction that is not observed in the s-E rotamer of 13. In contrast to the EPR spectra, the electronic absorption spectra of the rotamers of triplet 3-thienylcarbene (13) are indistinguishable under our experimental conditions. The carbene exhibits a weak electronic absorption in the visible spectrum (λmax = 467 nm) that is characteristic of triplet arylcarbenes. Although studies of 2-thienyldiazomethane (2), 3-furyldiazomethane (3), or 2-furyldiazomethane (4) provided further insight into the photochemical interconversions among C5H4S or C5H4O isomers, these studies did not lead to the spectroscopic detection of the corresponding triplet carbenes (2-thienylcarbene (11), 3-furylcarbene (23), or 2-furylcarbene (22), respectively)

Homophobia and heterosexism: Spanish Physical Education teachers’ perceptions

Physical education is traditionally a heteronormative environment, despite current studies highlighting the existence of positive changes in sport towards sexual diversity. In Spain, physical education teachers’ attitudes towards sexual minorities are an under-researched area. The current study identifies physical education teachers’ perceptions towards homophobia and heterosexism in their lessons, raising questions as to whether societies are hostile or more tolerant in regards to gays and lesbians in sport. This experimental and cross-sectional descriptive research involved 170 Physical Education teachers from mixed schools, using a modified version of the original questionnaire of homophobia and heterosexism perceptions by Morrow and Gill (2003). Results show heterosexist and homophobic behavior is apparent in physical education lessons, with teachers aware of these behaviours. Furthermore, it is highlighted that students use homosexually-themed language as an instrument to discriminate against gays and lesbians. This language use is not common among teachers, although when it is present, it is clearer and more frequent amongst male teachers

Teaching Domestic Violence in the New Millennium: Intersectionality as a Framework for Social Change

This article describes an intersectional approach to teaching about domestic violence (DV), which aims to empower students as critical thinkers and agents of change by merging theory, service learning, self-reflection, and activism. Three intersectional strategies and techniques for teaching about DV are discussed: promoting difference-consciousness, complicating gender-only power frameworks, and organizing for change. The author argues that to empower future generations to end violence, educators should put intersectionality into action through their use of scholarship, teaching methods, and pedagogical authority. Finally, the benefits and challenges of intersectional pedagogy for social justice education are considered

Characterization of Films with Thickness Less than 10 nm by Sensitivity-Enhanced Atomic Force Acoustic Microscopy

We present a method for characterizing ultrathin films using sensitivity-enhanced atomic force acoustic microscopy, where a concentrated-mass cantilever having a flat tip was used as a sensitive oscillator. Evaluation was aimed at 6-nm-thick and 10-nm-thick diamond-like carbon (DLC) films deposited, using different methods, on a hard disk for the effective Young's modulus defined as E/(1 - ν2), where E is the Young's modulus, and ν is the Poisson's ratio. The resonant frequency of the cantilever was affected not only by the film's elasticity but also by the substrate even at an indentation depth of about 0.6 nm. The substrate effect was removed by employing a theoretical formula on the indentation of a layered half-space, together with a hard disk without DLC coating. The moduli of the 6-nm-thick and 10-nm-thick DLC films were 392 and 345 GPa, respectively. The error analysis showed the standard deviation less than 5% in the moduli

Antigenic Characterization of H3 Subtypes of Avian Influenza A Viruses from North America

Besides humans, H3 subtypes of influenza A viruses (IAVs) can infect various animal hosts, including avian, swine, equine, canine, and sea mammal species. These H3 viruses are both antigenically and genetically diverse. Here, we characterized the antigenic diversity of contemporary H3 avian IAVs recovered from migratory birds in North America. Hemagglutination inhibition (HI) assays were performed on 37 H3 isolates of avian IAVs recovered from 2007 to 2011 using generated reference chicken sera. These isolates were recovered from samples taken in the Atlantic, Mississippi, Central, and Pacific waterfowl migration flyways. Antisera to all the tested H3 isolates cross-reacted with each other and, to a lesser extent, with those to H3 canine and H3 equine IAVs. Antigenic cartography showed that the largest antigenic distance among the 37 avian IAVs is about four units, and each unit corresponds to a 2 log 2 difference in the HI titer. However, none of the tested H3 IAVs cross-reacted with ferret sera derived from contemporary swine and human IAVs. Our results showed that the H3 avian IAVs we tested lacked significant antigenic diversity, and these viruses were antigenically different from those circulating in swine and human populations. This suggests that H3 avian IAVs in North American waterfowl are antigenically relatively stable. Además de infectar a los seres humanos, los subtipos H3 del virus de la influenza A (IAVs) pueden infectar a varios huéspedes animales, incluyendo aves, porcinos, equinos, caninos, y especies de mamíferos marinos. Estos virus H3 son tanto antigénica y genéticamente diversos. En este estudio, se caracterizó la diversidad antigénica de virus H3 contemporáneos recuperados de aves migratorias en América del Norte. Se realizaron pruebas de inhibición de la hemaglutinación (HI) en 37 H3 aislamientos de origen aviar recuperados de 2007 a 2011 usando sueros de pollo de referencia. Estos aislamientos fueron recuperados de las muestras tomadas de las rutas migratorias de aves acuáticas del Atlántico, Mississippi, Centro y del Pacífico. Los antisueros de todos los aislamientos H3 analizados mostraron reacciones cruzadas entre sí y en menor medida, con aquellos virus H3 de origen canino y equino. La cartografía antigénica demostró que la mayor distancia antigénica entre los 37 virus de este tipo de aves es de aproximadamente cuatro unidades, y cada unidad corresponde a una diferencia de dos logaritmos en el título de inhibición de la hemaglutinación. Sin embargo, ninguno de los virus H3 de este tipo mostró reacción cruzada con sueros de hurón específicos para virus de cerdos y humanos contemporáneos. Estos resultados mostraron que los virus H3 de origen aviar que se analizaron carecían de diversidad antigénica significativa y estos virus fueron antigénicamente diferentes de las que circulan en poblaciones de cerdos y de humanos. Esto sugiere que los virus H3 de aves acuáticas de América del Norte son relativamente estables antigénicamente

Fourier Analysis of Correlated Monte Carlo Importance Sampling

International audienceFourier analysis is gaining popularity in image synthesis, as a tool for the analysis of error in Monte Carlo (MC) integration. Still, existing tools are only able to analyze convergence under simplifying assumptions (such as randomized shifts) which are not applied in practice during rendering. We reformulate the expressions for bias and variance of sampling-based integrators to unify non-uniform sample distributions (importance sampling) as well as correlations between samples while respecting finite sampling domains. Our unified formulation hints at fundamental limitations of Fourier-based tools in performing variance analysis for MC integration. This non-trivial exercise also provides exciting insight into the effects of importance sampling on the convergence rate of estimators because of the introduction or removal of discontinuities. Specifically, we demonstrate that the convergence of multiple importance sampling (MIS) is determined by the strategy that converges slowest. We propose two simple and practical approaches to limit the impact of discontinuities on the convergence rate of estimators: The first one involves mirroring the integrand to cancel out the effect of boundary discontinuities. This is followed by two novel mirror sampling techniques for MC estimation in this mirrored domain. The second approach improves direct illumination light sampling by smoothing out discontinuities within the domain at the cost of introducing a small amount of bias. Our approaches are simple, practical and can be easily incorporated in production renderers

A new view of electrochemistry at highly oriented pyrolytic graphite

Major new insights on electrochemical processes at graphite electrodes are reported, following extensive investigations of two of the most studied redox couples, Fe(CN)64–/3– and Ru(NH3)63+/2+. Experiments have been carried out on five different grades of highly oriented pyrolytic graphite (HOPG) that vary in step-edge height and surface coverage. Significantly, the same electrochemical characteristic is observed on all surfaces, independent of surface quality: initial cyclic voltammetry (CV) is close to reversible on freshly cleaved surfaces (>400 measurements for Fe(CN)64–/3– and >100 for Ru(NH3)63+/2+), in marked contrast to previous studies that have found very slow electron transfer (ET) kinetics, with an interpretation that ET only occurs at step edges. Significantly, high spatial resolution electrochemical imaging with scanning electrochemical cell microscopy, on the highest quality mechanically cleaved HOPG, demonstrates definitively that the pristine basal surface supports fast ET, and that ET is not confined to step edges. However, the history of the HOPG surface strongly influences the electrochemical behavior. Thus, Fe(CN)64–/3– shows markedly diminished ET kinetics with either extended exposure of the HOPG surface to the ambient environment or repeated CV measurements. In situ atomic force microscopy (AFM) reveals that the deterioration in apparent ET kinetics is coupled with the deposition of material on the HOPG electrode, while conducting-AFM highlights that, after cleaving, the local surface conductivity of HOPG deteriorates significantly with time. These observations and new insights are not only important for graphite, but have significant implications for electrochemistry at related carbon materials such as graphene and carbon nanotubes