Relative affinity constants by electrospray ionization and Fourier transform ion cyclotron resonance mass spectrometry: calmodulin binding to peptide analogs of myosin light chain kinase

Synthetic RS20 peptide and a set of its point-mutated peptide analogs have been used to analyze the interactions between calmodulin (CaM) and the CaM-binding sequence of smooth-muscle myosin light chain kinase both in the presence and the absence of Ca2+. Particular peptides, which were expected to have different binding strengths, were chosen to address the effects of electrostatic and bulky mutations on the binding affinity of the RS20 sequence. Relative affinity constants for protein/ligand interactions have been determined using electrospray ionization and Fourier transform ion cyclotron resonance mass spectrometry. The results evidence the importance of electrostatic forces in interactions between CaM and targets, particularly in the presence of Ca2+, and the role of hydrophobic forces in contributing additional stability to the complexes both in the presence and the absence of Ca2+

Using Inductance as a Tuning Parameter for RF Meta-atoms

The resonant frequency of metamaterials structured with split ring resonator (SRR) meta-atoms is determined primarily through the capacitance and inductance of the individual meta-atoms. Two designs that vary inductance incrementally were modeled, simulated, fabricated, and tested to investigate the role inductance plays in metamaterial designs. The designs consisted of strategically adding sections to the SRR to increase the inductance, but in a manner that minimized capacitance variations. Each design showed a shift in resonant frequency that was proportional to the length of the added section. As the length of each section was increased, the resonant frequency shifted from 2.78 GHz to 2.18 GHz

Low-loss Meta-atom for Improved Resonance Response

Measurements of a meta-atom integrated with a low noise amplifier into the split-ring resonator are presented. A comparison is made between baseline meta-atoms and one integrated with a GaAs low noise amplifier. S-parameter measurements in a RF strip-line show the resonant frequency location. The resonance null is more prominent for the integrated meta-atom. Biasing the low noise amplifier from 0 to 7 VDC showed that the resonant null improved with biasing voltage. As the biasing voltage increases, the transmission null reduced from -11.82 to -23.21 dB for biases from 0 to 7 VDC at resonant frequency

Electrostatically Tunable Meta-Atoms Integrated With In Situ Fabricated MEMS Cantilever Beam Arrays

Two concentric split ring resonators (SRRs) or meta-atoms designed to have a resonant frequency of 14 GHz are integrated with microelectromechanical systems cantilever arrays to enable electrostatic tuning of the resonant frequency. The entire structure was fabricated monolithically to improve scalability and minimize losses from externally wire-bonded components. A cantilever array was fabricated in the gap of both the inner and outer SRRs and consisted of five evenly spaced beams with lengths ranging from 300 to 400 μm. The cantilevers pulled in between 15 and 24 V depending on the beam geometry. Each pulled-in beam increased the SRR gap capacitance resulting in an overall 1-GHz shift of the measured meta-atom resonant frequency

Shafranov's virial theorem and magnetic plasma confinement

Shafranov's virial theorem implies that nontrivial magnetohydrodynamical equilibrium configurations must be supported by externally supplied currents. Here we extend the virial theorem to field theory, where it relates to Derrick's scaling argument on soliton stability. We then employ virial arguments to investigate a realistic field theory model of a two-component plasma, and conclude that stable localized solitons can exist in the bulk of a finite density plasma. These solitons entail a nontrivial electric field which implies that purely magnetohydrodynamical arguments are insufficient for describing stable, nontrivial structures within the bulk of a plasma.Comment: 9 pages no figure

Use of the Randox Evidence Investigator immunoassay system for near-body drug screening during post-mortem examination in 261 forensic cases

BackgroundThis paper describes the performance of four Randox drug arrays, designed for whole blood, for the near-body analysis of drugs in a range of post-mortem body specimens.MethodsLiver, psoas muscle, femoral blood, vitreous humor and urine from 261 post-mortem cases were screened in the mortuary and results were obtained within the time taken to complete a post-mortem. Specimens were screened for the presence of amfetamine, barbiturates, benzodiazepines, benzoylecgonine, buprenorphine, cannabinoids, dextropropoxyphene, fentanyl, ketamine, lysergide, methadone, metamfetamine, methaqualone, 3,4-methylenedioxymetamfetamine, opioids, paracetamol, phencyclidine, salicylate, salicylic acid, zaleplon, zopiclone and zolpidem using the DOA I, DOA I+, DOA II and Custom arrays.ResultsLiver and muscle specimens were obtained from each of the 261 post-mortem cases; femoral blood, vitreous humor and urine were available in 98%, 92% and 72% of the cases, respectively. As such, the equivalent of 12,978 individual drug-specific, or drug-group, immunoassay tests were undertaken. Overall >98% of the 12,978 screening tests undertaken agreed with laboratory confirmatory tests performed on femoral blood.ConclusionsThere is growing interest in the development of non-invasive procedures for determining the cause of death using MRI and CT scanning however these procedures are, in most cases, unable to determine whether death may have been associated with drug use. The Randox arrays can provide qualitative and semi-quantitative results in a mortuary environment enabling pathologists to decide whether to remove specimens from the body and submit them for laboratory analysis. Analysis can be undertaken on a range of autopsy specimens which is particularly useful when conventional specimens such as blood are unavailable

SRRs Embedded with MEMS Cantilevers to Enable Electrostatic Tuning of the Resonant Frequency

A microelectromechanical systems (MEMS) cantilever array was monolithically fabricated in the gap region of a split ring resonator (SRR) to enable electrostatic tuning of the resonant frequency. The design consisted of two concentric SRRs each with a set of cantilevers extending across the split region. The cantilever array consisted of five beams that varied in length from 300 to 400 μm, with each beam adding about 2 pF to the capacitance as it actuated. The entire structure was fabricated monolithically to reduce its size and minimize losses from externally wire bonded components. The beams actuate one at a time, longest to shortest with an applied voltage ranging from 30–60 V. The MEMS embedded SRRs displayed dual resonant frequencies at 7.3 and 14.2 GHz or 8.4 and 13.5 GHz depending on the design details. As the beams on the inner SRR actuated the 14.2 GHz resonance displayed tuning, while the cantilevers on the outer SRR tuned the 8.4 GHz resonance. The 14.2 GHz resonant frequency shifts 1.6 GHz to 12.6 GHz as all the cantilevers pulled-in. Only the first two beams on the outer cantilever array pulled-in, tuning the resonant frequency 0.4 GHz from 8.4 to 8.0 GHz

Changes in recreational behaviors of outdoor enthusiasts during the COVID-19 pandemic: analysis across urban and rural communities

The COVID-19 pandemic presents not only a global health crisis but has also disrupted the daily lives of people around the world. From a leisure perspective, urban outdoor enthusiasts are one group particularly impacted by the pandemic and the subsequent institutional response. Stay-at-home orders and physical distancing recommendations serve as potential inhibitors to outdoor recreation activities central to the lifestyles and wellbeing of outdoor enthusiasts. In urban areas, where these orders and recommendations are most restrictive, the potential impacts on recreation behavior are most consequential. This study provides an empirical analysis of the COVID-19 pandemic’s impact on the recreational behaviors of outdoor enthusiasts across urban and rural communities. Results suggest that the frequency of outdoor recreation participation, distance travelled to participate in outdoor recreation and distance travelled beyond roads during outdoor recreation have declined significantly more among outdoor enthusiasts residing in urban areas than urban clusters or rural areas

Packing polymorphism of dapivirine and its impact on the performance of a dapivirine-releasing silicone elastomer vaginal ring

PRISMA Checklist (PDF 545 kb