48 research outputs found

    Sediment resuspension rates, organic matter quality and food utilization by sea scallops (Placopecten magellanicus) on Georges Bank

    Get PDF
    Benthic detritus, bacteria, and settled phytoplankton are transported into the water column by resuspension, potentially providing a high quality food source to suspension feeders. Two aspects of resuspension must be considered in relation to food supplies for suspension feeders: the flux of particles from the sediments to the water column and its food value. Sediment resuspension rates on Georges Bank and the role of resuspended sediment in the diet of sea scallops (Placopecten magellanicus) were determined in laboratory flume experiments and shipboard feeding experiments, respectively. Resuspended carbon flux was estimated from flume bedload transport rates and the mass of organic carbon associated with the silt-clay fraction eroded from Georges Bank sediment during transport. A comparison of sand erosion thresholds with the frequency distribution of shear velocity estimated from field current meters indicated that tidal sediment resuspension will occur 62% of the time. Resuspended material had a carbon content of 4–8% and a C:N of 5–8. Rates of resuspension (33–229 mg C m−2h−1) and settling rates indicate that resuspended sediment in a size range available to scallops (\u3e5 μm) remains in suspension for periods of hours to days. Clearance rates of resuspended sediment by scallops were similar to those for water column particles, and filtration rates increased with increasing concentrations of resuspended material. Feeding experiments demonstrated that scallops absorbed organic matter from resuspended sediments with an efficiency of up to 40%. Therefore, in terms of particle retention, ingestion, and digestion, sea scallops are able to exploit resuspended organic matter from a continental shelf habitat. Furthermore, resuspension occurs with sufficient frequency, and resuspended sediment has long enough residence time in the water column to provide a consistent nutritional benefit to scallops

    Potential methodological influences on the determination of particle retention efficiency by suspension feeders: Mytilus edulis and ciona intestinalis

    Get PDF
    The retention efficiency (RE) of suspension-feeding bivalve molluscs depends on particle size and is generally assumed to decline below a maximum retention of particles larger than 3 to 7 µm. Previous suggestions that the RE spectrum of mussels Mytilus edulis can exhibit variability, possibly as a result of physiological regulation, have been attributed to artifacts associated with the indirect method. The possibility that variable physical properties of seston particles and/or miscalculations can result in inaccurate RE measurements was examined using 3 methodologies (static, flow-through and a new approach based on the static method) and 3 particle sources (natural seston, algal cell monocultures and clay). Measurements obtained with the static method varied depending on the selected sampling interval. However, this artifact can be removed using frequent sampling and a regression analysis approach. Accurate RE measurements can be obtained with the flow-through method when feeding behaviour is flow independent. For all particle suspensions and methods, mussels from the study site in Lysefjord, Norway, had a maximum RE for particles >8–11 µm (1 to 5 September 2015). The RE for smaller particles declined gradually, with 50–60% retention of 4 µm particles and 30–40% retention of 2 µm particles. Differences in the RE size spectra of mussels and tunicates Ciona intestinalis, collected and measured at the same site, further indicated that RE was not influenced by potentially confounding methodological factors. Assumptions regarding the RE spectrum of bivalves have contributed to many conclusions on their ecosystem interactions. The reliability of clearance rate measurements obtained using the indirect method can only be assured if the effective retention of tracer particles is confirmed and not assumed.publishedVersio

    Military trainees can accurately measure optic nerve sheath diameter after a brief training session

    Full text link
    Abstract Background Identification of elevated intracranial pressure is important following traumatic brain injury. We assessed the feasibility of educating military trainees on accurately obtaining optic nerve sheath diameter measurements using a brief didactic and hands-on training session. Optic nerve sheath diameter is a noninvasive surrogate marker for elevated intracranial pressure, and may be of value in remote military operations, where rapid triage decisions must be made without access to advanced medical equipment. Methods Military trainees with minimal ultrasound experience were given a 5-min didactic presentation on optic nerve sheath diameter ultrasound. Trainees practiced optic nerve sheath diameter measurements guided by emergency physician ultrasound experts. Trainees then measured the optic nerve sheath diameter on normal volunteers. Following this, a trained physician measured the optic nerve sheath diameter on the same volunteer as a criterion standard. An average of three measurements was taken. Results Twenty-three military trainees were enrolled. A mixed design ANOVA was used to compare measurements by trainees to those of physicians, with a mean difference of − 0.6 mm (P = 0.76). A Bland-Altman analysis showed that the degree of bias in optic nerve sheath diameter measures provided by trainees was very small: d = − 0.004 for the right eye and d = − 0.007 for the left eye. Conclusion This study demonstrates that optic nerve sheath diameter measurement can be accurately performed by novice ultrasonographers after a brief training session. If validated, point-of-care optic nerve sheath diameter measurement could impact the triage of injured patients in remote areas.https://deepblue.lib.umich.edu/bitstream/2027.42/146752/1/40779_2018_Article_189.pd

    Effect of Mytilus coruscus selective filtration on phytoplankton assemblages

    Get PDF
    The feeding selectivity of bivalves can play an important role in shaping the structure of phytoplankton communities of natural waters. This could be particularly true in waters with intensive bivalves farming, like Sungo Bay, Northern China. Understanding the role of bivalve feeding behavior is important for assessing how the dense cultivation of bivalves may affect phytoplankton community composition and food web structure in farm areas. In this study, we investigated the feeding selectivity of blue mussel Mytilus coruscus on natural phytoplankton assemblages in Sungo Bay using both optical microscopy and HPLC-pigment analysis. Results showed that cryptophytes dominated the phytoplankton community and made up 66.1% of the total phytoplankton abundance. A comparison of phytoplankton composition between natural and filtered seawater showed that M. coruscus preferred cryptophytes and dinoflagellates than Chaetoceros spp. and Skeletonema spp. Cryptophytes were not detected in gut contents by microscopic observation, while their marker pigment alloxanthin was present, suggesting they were also consumed by M. coruscus and can be readily digested. This highlights the shortcomings of microscopic methods and the significance of HPLC-pigment analysis in obtaining a comprehensive understanding of feeding selectivity of bivalves. The proportions of Chaetoceros spp. and Skeletonema spp. in gut contents were significantly lower than their proportions in the seawater, and contrastingly, the proportions of Cocconeis spp. and Pinnularia spp. showed opposite patterns. The marker pigments prasinoxanthin and zeaxanthin were detected in the gut of M. coruscus indicating that picophytoplankton (e.g., prasinophytes and Synechococcus) are also food sources for this bivalve. This information furthers our understanding of bivalve aquaculture and environment interactions.publishedVersio

    Iron is a ligand of SecA-like metal-binding domains in vivo

    Get PDF
    Funding: JEL thanks the Royal Society for a University Research Fellowship and the Wellcome Trust for the Q-band EPR spectrometer (099149/Z/12/Z).The ATPase SecA is an essential component of the bacterial Sec machinery, which transports proteins across the cytoplasmic membrane. Most SecA proteins contain a long C-terminal tail (CTT). In Escherichia coli, the CTT contains a structurally flexible linker domain and a small metal-binding domain (MBD). The MBD coordinates zinc via a conserved cysteine-containing motif and binds to SecB and ribosomes. In this study, we screened a high-density transposon library for mutants that affect the susceptibility of E. coli to sodium azide, which inhibits SecA-mediated translocation. Results from sequencing this library suggested that mutations removing the CTT make E. coli less susceptible to sodium azide at subinhibitory concentrations. Copurification experiments suggested that the MBD binds to iron and that azide disrupts iron binding. Azide also disrupted binding of SecA to membranes. Two other E. coli proteins that contain SecA-like MBDs, YecA and YchJ, also copurified with iron, and NMR spectroscopy experiments indicated that YecA binds iron via its MBD. Competition experiments and equilibrium binding measurements indicated that the SecA MBD binds preferentially to iron and that a conserved serine is required for this specificity. Finally, structural modelling suggested a plausible model for the octahedral coordination of iron. Taken together, our results suggest that SecA-like MBDs likely bind to iron in vivo.PostprintPeer reviewe

    Attraction and repulsion of mobile wild organisms to finfish and shellfish aquaculture: a review

    Get PDF
    Knowledge of aquaculture–environment interactions is essential for the development of a sustainable aquaculture industry and efficient marine spatial planning. The effects of fish and shellfish farming on sessile wild populations, particularly infauna, have been studied intensively. Mobile fauna, including crustaceans, fish, birds and marine mammals, also interact with aquaculture operations, but the interactions are more complex and these animals may be attracted to (attraction) or show an aversion to (repulsion) farm operations with various degrees of effects. This review outlines the main mechanisms and effects of attraction and repulsion of wild animals to/from marine finfish cage and bivalve aquaculture, with a focus on effects on fisheries-related species. Effects considered in this review include those related to the provision of physical structure (farm infrastructure acting as fish aggregating devices (FADs) or artificial reefs (ARs), the provision of food (e.g. farmed animals, waste feed and faeces, fouling organisms associated with farm structures) and some farm activities (e.g. boating, cleaning). The reviews show that the distribution of mobile organisms associated with farming structures varies over various spatial (vertical and horizontal) and temporal scales (season, feeding time, day/night period). Attraction/repulsion mechanisms have a variety of direct and indirect effects on wild organisms at the level of individuals and populations and may have implication for the management of fisheries species and the ecosystem in the context of marine spatial planning. This review revealed considerable uncertainties regarding the long-term and ecosystem-wide consequences of these interactions. The use of modelling may help better understand consequences, but long-term studies are necessary to better elucidate effects

    Ecosystem models of bivalve aquaculture: Implications for supporting goods and services

    Get PDF
    In this paper we focus on the role of ecosystem models in improving our understanding of the complex relationships between bivalve farming and the dynamics of lower trophic levels. To this aim, we review spatially explicit models of phytoplankton impacted by bivalve grazing and discuss the results of three case studies concerning an estuary (Baie des Veys, France), a bay, (Tracadie Bay, Prince Edward Island, Canada) and an open coastal area (Adriatic Sea, Emilia-Romagna coastal area, Italy). These models are intended to provide insight for aquaculture management, but their results also shed light on the spatial distribution of phytoplankton and environmental forcings of primary production. Even though new remote sensing technologies and remotely operated in situ sensors are likely to provide relevant data for assessing some the impacts of bivalve farming at an ecosystem scale, the results here summarized indicate that ecosystem modelling will remain the main tool for assessing ecological carrying capacity and providing management scenarios in the context of global drivers, such as climate change

    Socio-economic Aspects of Marine Bivalve Production

    Get PDF
    The aim of this book is to review and analyse the goods and services of bivalve shellfish. How they are defined, what determines the ecological functions that are the basis for the goods and services, what controversies in the use of goods and services exist, and what is needed for sustainable exploitation of bivalves from the perspective of the various stakeholders. The book is focused on the goods and services, and not on impacts of shellfish aquaculture on the benthic environment, or on threats like biotoxins; neither is it a shellfish culture handbook although it can be used in evaluating shellfish culture. The reviews and analysis are based on case studies that exemplify the concept, and show the strengths and weaknesses of the current applications. The multi-authored reviews cover ecological, economic and social aspects of bivalve goods and services. The book provides new insights for scientists, students, shellfish producers, policy advisors, nature conservationists and decision makers
    corecore