755 research outputs found
Influence of polarizability on metal oxide properties studied by molecular dynamics simulations
We have studied the dependence of metal oxide properties in molecular
dynamics (MD) simulations on the polarizability of oxygen ions. We present
studies of both liquid and crystalline structures of silica (SiO2), magnesia
(MgO) and alumina (Al2O3). For each of the three oxides, two separately
optimized sets of force fields were used: (i) Long-range Coulomb interactions
between oxide and metal ions combined with a short-range pair potential. (ii)
Extension of force field (i) by adding polarizability to the oxygen ions. We
show that while an effective potential of type (i) without polarizable oxygen
ions can describe radial distributions and lattice constants reasonably well,
potentials of type (ii) are required to obtain correct values for bond angles
and the equation of state. The importance of polarizability for metal oxide
properties decreases with increasing temperature.Comment: 8 pages, 7 figure
Uncertainty quantification for classical effective potentials: an extension to potfit
Effective potentials are an essential ingredient of classical molecular
dynamics (MD) simulations. Little is understood of the consequences of
representing the complex energy landscape of an atomic configuration by an
effective potential or force field containing considerably fewer parameters.
The probabilistic potential ensemble method has been implemented in the potfit
force matching code. This introduces uncertainty quantification into the
interatomic potential generation process. Uncertainties in the effective
potential are propagated through MD to obtain uncertainties in quantities of
interest, which are a measure of the confidence in the model predictions.
We demonstrate the technique using three potentials for nickel: two simple
pair potentials, Lennard-Jones and Morse, and a local density dependent
embedded atom method (EAM) potential. A potential ensemble fit to density
functional theory (DFT) reference data is constructed for each potential to
calculate the uncertainties in lattice constants, elastic constants and thermal
expansion. We quantitatively illustrate the cases of poor model selection and
fit, highlighted by the uncertainties in the quantities calculated. This shows
that our method can capture the effects of the error incurred in quantities of
interest resulting from the potential generation process without resorting to
comparison with experiment or DFT, which is an essential part to assess the
predictive power of MD simulations.Comment: 10 pages, 3 figure
Understanding long-time vacancy aggregation in iron: a kinetic activation-relaxation technique study
Vacancy diffusion and clustering processes in body-centered-cubic (bcc) Fe
are studied using the kinetic activation-relaxation technique (k-ART), an
off-lattice kinetic Monte Carlo method with on-the-fly catalog building
capabilities. For monovacancies and divacancies, k-ART recovers previously
published results while clustering in a 50-vacancy simulation box agrees with
experimental estimates. Applying k-ART to the study of clustering pathways for
systems containing from one to six vacancies, we find a rich set of diffusion
mechanisms. In particular, we show that the path followed to reach a
hexavacancy cluster influences greatly the associated mean-square displacement.
Aggregation in a 50-vacancy box also shows a notable dispersion in relaxation
time associated with effective barriers varying from 0.84 to 1.1 eV depending
on the exact pathway selected. We isolate the effects of long-range elastic
interactions between defects by comparing to simulations where those effects
are deliberately suppressed. This allows us to demonstrate that in bcc Fe,
suppressing long-range interactions mainly influences kinetics in the first 0.3
ms, slowing down quick energy release cascades seen more frequently in full
simulations, whereas long-term behavior and final state are not significantly
affected.Comment: 11 pages, 12 figures. Updated to post-review manuscrip
Entwicklung und Test von Wechselwirkungspotenzialen für komplexe intermetallische Verbindungen
Complex metallic alloys and quasicrystals show extraordinary physical properties relevant for technological applications, for example hardness at low density. In the study of these systems, atomistic simulation with classical interaction potentials is a very promising tool. Such simulations require classical effective potentials describing the cohesive energy as a function of the atomic coordinates. The quality of the simulation depends crucially on the accuracy with which this potential describes the real interactions. One way to generate physically relevant potentials is the force matching method, where the parameters of a potential are adjusted to optimally reproduce the forces on individual atoms determined from quantum-mechanical calculation. The programme package potfit developed as part of this thesis implements the force matching method efficiently. Potentials are generated for a number of complex metallic alloy systems. A potential for the decagonal basic Ni-rich Al-Co-Ni quasicrystal is used to simulate diffusion processes and melting. In the CaCd6 system built from multishelled clusters, the shape and orientation of the innermost cluster shell is studied. Finally, phonon dispersion in the Mg-Zn system is determined and compared to experiment. The programme potfit is shown to be an effective tool for generating physically justified effective potentials. Potentials created with potfit can greatly improve the understanding of complex metallic alloys through atomistic simulations.Komplexe intermetallische Verbindungen und Quasikristalle zeigen außergewöhnliche physikalische Eigenschaften, wie z.B. Härte bei geringer Dichte. Bei der Untersuchung dieser Systeme sind atomistische Simulationen mit klassischen Wechselwirkungspotenzialen ein wichtiges Werkzeug. Für solche Simulationen benötigt man klassische effektive Potenziale, die die Bindungsenergie als eine Funktion der Atomkoordinaten beschreiben. Die Qualität der Simulation hängt entscheidend von der Genauigkeit ab, mit der diese Potenziale die echten Wechselwirkungen wiedergeben. Eine Möglichkeit, physikalisch relevante Potenziale zu erzeugen, ist die Force-Matching-Methode. Dabei werden die Parameter eines Potenzials so angepasst, dass die mit quantenmechanischen Methoden bestimmten Kräfte auf die einzelnen Atome bestmöglich reproduziert werden. Das als Teil dieser Arbeit entwickelte Programmpaket potfit implementiert die Force-Matching-Methode effizient. Für einige komplexe intermetallische Verbindungen werden Potenziale bestimmt. In dekagonalen Al-Co-Ni-Quasikristallen werden mit Hilfe eines Potenzials Diffusionsprozesse und Schmelzvorgänge simuliert. In der aus mehrschaligen Clustern bestehenden CaCd6-Verbindung wird die Struktur der innersten Clusterschale untersucht. Schließlich wird die Phononendispersion im Mg-Zn-System bestimmt und mit experimentellen Ergebnissen verglichen. Es wird gezeigt, dass das Programm potfit ein effektives Werkzeug zur Erzeugung physikalisch gerechtfertigter Wechselwirkungen ist. Potenziale, die mit potfit erzeugt werden, können zum Verständnis komplexer metallischer Verbindungen durch atomistische Simulationen viel beitragen
Enhancement of island size by dynamic substrate disorder in simulations of graphene growth
We demonstrate a new mechanism in the early stages of sub-monolayer epitaxial island growth, using Monte Carlo simulations motivated by experimental observations on the growth of graphene on copper foil. In our model, the substrate is “dynamically rough”, by which we mean (i) the interaction strength between Cu and C varies randomly from site to site, and (ii) these variable strengths themselves migrate from site to site. The dynamic roughness provides a simple representation of the near-molten state of the Cu substrate in the case of real graphene growth. Counterintuitively, the graphene island size increases when dynamic roughness is included, compared to a static and smooth substrate. We attribute this effect to destabilisation of small graphene islands by fluctuations in the substrate, allowing them to break up and join larger islands which are more stable against roughness. In the case of static roughness, when process (ii) is switched off, island growth is strongly inhibited and the scale-free behaviour of island size distributions, present in the smooth-static and rough-dynamic cases, is destroyed. The effects of the dynamic substrate roughness cannot be mimicked by parameter changes in the static cases
The Activation-Relaxation Technique : ART nouveau and kinetic ART
The evolution of many systems is dominated by rare activated events that occur on timescale ranging from nanoseconds to the hour or more. For such systems, simulations must leave aside the full thermal description to focus specifically on mechanisms that generate a configurational change. We present here the activation relaxation technique (ART), an open-ended saddle point search algorithm, and a series of recent improvements to ART nouveau and kinetic ART, an ART-based on-the-fly off-lattice self-learning kinetic Monte Carlo method
Direct Wolf summation of a polarizable force field for silica
We extend the Wolf direct, pairwise r^(-1) summation method with spherical
truncation to dipolar interactions in silica. The Tangney-Scandolo interatomic
force field for silica takes regard of polarizable oxygen atoms whose dipole
moments are determined by iteration to a self-consistent solution. With Wolf
summation, the computational effort scales linearly in the system size and can
easily be distributed among many processors, thus making large-scale
simulations of dipoles possible. The details of the implementation are
explained. The approach is validated by estimations of the error term and
simulations of microstructural and thermodynamic properties of silica.Comment: See http://link.aip.org/link/?JCP/132/194109 - 8 pages, 6 figures.
Changes in v3: Copyright notice added, minor typographical changes. Changes
in v2: 1. Inserted Paragraph in Sec. IV B describing the limitations of the
TS potential. 2. We corrected transcription errors in Tab. II, and adjusted
the deviation percentages mentioned in Sec. IV B, first paragraph,
accordingl
Diffusion of point defects in crystalline silicon using the kinetic activation-relaxation technique method
We study point-defect diffusion in crystalline silicon using the kinetic activation-relaxation technique (k-ART), an off-lattice kinetic Monte Carlo method with on-the-fly catalog building capabilities based on the activation-relaxation technique (ART nouveau), coupled to the standard Stillinger-Weber potential. We focus more particularly on the evolution of crystalline cells with one to four vacancies and one to four interstitials in order to provide a detailed picture of both the atomistic diffusion mechanisms and overall kinetics. We show formation energies, activation barriers for the ground state of all eight systems, and migration barriers for those systems that diffuse. Additionally, we characterize diffusion paths and special configurations such as dumbbell complex, di-interstitial (IV-pair+2I) superdiffuser, tetrahedral vacancy complex, and more. This study points to an unsuspected dynamical richness even for this apparently simple system that can only be uncovered by exhaustive and systematic approaches such as the kinetic activation-relaxation technique
Bayesian structural identification of a long suspension bridge considering temperature and traffic load effects
© The Author(s) 2018. This article presents a probabilistic structural identification of the Tamar bridge using a detailed finite element model. Parameters of the bridge cables initial strain and bearings friction were identified. Effects of temperature and traffic were jointly considered as a driving excitation of the bridge’s displacement and natural frequency response. Structural identification is performed with a modular Bayesian framework, which uses multiple response Gaussian processes to emulate the model response surface and its inadequacy, that is, model discrepancy. In addition, the Metropolis–Hastings algorithm was used as an expansion for multiple parameter identification. The novelty of the approach stems from its ability to obtain unbiased parameter identifications and model discrepancy trends and correlations. Results demonstrate the applicability of the proposed method for complex civil infrastructure. A close agreement between identified parameters and test data was observed. Estimated discrepancy functions indicate that the model predicted the bridge mid-span displacements more accurately than its natural frequencies and that the adopted traffic model was less able to simulate the bridge behaviour during traffic congestion periods
Kinetic Activation Relaxation Technique
We present a detailed description of the kinetic Activation-Relaxation
Technique (k-ART), an off-lattice, self-learning kinetic Monte Carlo algorithm
with on-the-fly event search. Combining a topological classification for local
environments and event generation with ART nouveau, an efficient unbiased
sampling method for finding transition states, k-ART can be applied to complex
materials with atoms in off-lattice positions or with elastic deformations that
cannot be handled with standard KMC approaches. In addition to presenting the
various elements of the algorithm, we demonstrate the general character of
k-ART by applying the algorithm to three challenging systems: self-defect
annihilation in c-Si (crystalline silicon), self-interstitial diffusion in Fe
and structural relaxation in a-Si (amorphous silicon).Comment: 13 pages, 11 figures. Final version as published, Figs. 6 and 7
exchanged, minor typographical and stylistic correction
- …