Decomposition process in a FeAuPd alloy nanostructured by severe plastic deformation

The decomposition process mechanisms have been investigated in a Fe50Au25Pd25 (at.%) alloy processed by severe plastic deformation. Phases were characterized by X-ray diffraction and microstructures were observed using transmission electron microscopy. In the coarse grain alloy homogenized and aged at $450 ^{circ}\mathrm{C}$, the bcc \alpha-Fe and fcc AuPd phases nucleate in the fcc supersaturated solid solution and grow by a discontinuous precipitation process resulting in a typical lamellar structure. The grain size of the homogenized FeAuPd alloy was reduced in a range of 50 to 100nm by high pressure torsion. Aging at $450 ^{circ}\mathrm{C}$ this nanostructure leads to the decomposition of the solid solution into an equi-axed microstructure. The grain growth is very limited during aging and the grain size remains under 100nm. The combination of two phases with different crystallographic structures (bcc \alpha-Fe and fcc AuPd) and of the nanoscaled grain size gives rise to a significant hardening of the allo

Experimental and numerical study of strength mismatch in cross-weld tensile testing

The mechanical properties of welded boiler tubes used in power plants can be significantly altered as a result of the fabrication history, such as pre-straining and heat treatment. The primary aim of the study was to determine the effect of fabrication history on local tensile properties across the welds. This was achieved by testing cross-weld specimens machined from welded thin-walled tubes (with unstrained or pre-strained base metal) before and after heat treatment. Digital image correlation, which is a full-field strain measurement technique, was implemented in order to obtain the local stress–strain curves and to extract the corresponding local tensile properties such as offset proof stress. Evidence of strain hardening due to the constraint and thermo-mechanical cycles during the welding process was found in the heat-affected zone and evidence of softening was observed in the pre-strained base metal. It was found that the heat treatment process removed the effect of pre-straining and welding on the proof stress and the strength along the specimen was nearly homogenized. However, mapping the local stress–strain curves in the as-welded cross-weld specimens with pre-strained base metal has revealed abnormal strain relaxation with increase in load in the weld-affected region. For a better understanding of this behaviour, a tensile test of a cross-weld specimen with a large strength mismatch between the weld metal and the base metal was simulated using the finite element method. It was found that the strength mismatch in the specimen causes the development of biaxial stresses in the heat-affected zone once local yielding begins, and the use of global axial stress to construct the local stress–strain curve results in an apparent ‘reduced-strain’ anomaly. Nevertheless, for the strength mismatch ratios studied, this anomalous behaviour did not seem to significantly affect the determination of the local proof stress in the specimens

Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel

The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe tomography and scanning transmission electron microscopy. It was shown that the refinement of the microstructure affects the precipitation kinetics and the spatial distribution of the secondary hardening intermetallic phase, which was observed to nucleate heterogeneously on dislocations and sub-grain boundaries. It was revealed that alloys successively subjected to these two strengthening mechanisms exhibit a lower increase in mechanical strength than a simple estimation based on the summation of the two individual strengthening mechanisms

The Hall-Petch effect as a manifestation of the general size effect

The experimental evidence for the Hall-Petch dependence of strength on the inverse square-root of grain size is reviewed critically. Both the classic data and more recent results are considered. While the data can be fitted to the inverse square-root dependence excellently (but using two free fitting parameters for each dataset), it is also consistent with a dependence on the simple inverse of grain size (with one free fitting parameter for each dataset). There have been difficulties, recognised for half-a-century, in explaining the inverse square-root expression. A Bayesian analysis shows that the data strongly supports the simple inverse expression proposed. Since this expression derives from underlying theory, it is also more readily explicable. It is concluded that the Hall-Petch effect is not to be explained by the variety of theories found in the literature, but is a manifestation of, or underlain by, the general size effect observed throughout micromechanics, due to the inverse relationship between the stress required and the space available for dislocation sources to operate.Comment: Paper presented at Plasticity 2014, The Bahama

Tyrosine kinase signalling in breast cancer: ErbB family receptor tyrosine kinases

ERBB family receptor tyrosine kinases are overexpressed in a significant subset of breast cancers. One of these receptors, HER2/neu, or ErbB-2, is the target for a new rational therapeutic antibody, Herceptin. Other inhibitors that target this receptor, and another family member, the epidermal growth factor (EGF) receptor, are moving into clinical trials. Both of these receptors are sometimes overexpressed in breast cancer, and still subject to regulation by hormones and other physiological regulators. Optimal use of therapeutics targeting these receptors will require consideration of the several modes of regulation of these receptors and their interactions with steroid receptors