749 research outputs found
"Explosive Energy" during volcanic eruptions from fractal analysis of pyroclasts
Despite recent advances by means of experiments and high-resolution surveys and the growing understanding of the physical processes
before and during volcanic eruptions, duration and type of eruptive activity still remain highly unpredictable. This uncertainty hinders
appropriate hazard and associated risk assessment tremendously. In an effort to counter this problem, experimentally generated pyroclasts
have been studied by fractal statistics with the aim of evaluating possible relationships between eruption energy and fragmentation efficiency.
Rapid decompression experiments have been performed on three differently porous sample sets of the 1990–1995 eruption of Unzen
volcano (Japan) at 850 °C and at initial pressure values above the respective fragmentation threshold [U. Kueppers, B. Scheu, O. Spieler, D.
B. Dingwell, Fragmentation efficiency of explosive volcanic eruptions: a study of experimentally generated pyroclasts. J. Volcanol.
Geotherm. Res. 153 (2006) 125–135.,O. Spieler, B. Kennedy, U. Kueppers, D.B. Dingwell, B. Scheu, J. Taddeucci, The fragmentation
threshold of pyroclastic rocks. EPSL 226 (2004) 139–148.]. The size distribution of generated pyroclasts has been studied by fractal
fragmentation theory and the fractal dimension of fragmentation (Df), a value quantifying the intensity of fragmentation, has been measured
for each sample. Results showthat size distribution of pyroclastic fragments follows a fractal law(i.e. power-law) in the investigated range of
fragment sizes, indicating that fragmentation of experimental samples reflects a scale-invariant mechanism. In addition, Df is correlated
positively with the potential energy for fragmentation (PEF) while showing a strong influence of the open porosity of the samples.
Results obtained in this work indicate that fractal fragmentation theory may allow for quantifying fragmentation processes during
explosive volcanic eruptions by calculating the fractal dimension of the size distribution of pyroclasts. It emerges fromthis study that fractal
dimension may be utilised as a proxy for estimating the explosivity of volcanic eruptions by analysing their natural pyroclastic deposits
Rigidity for perimeter inequality under spherical symmetrisation
Necessary and sufficient conditions for rigidity of the perimeter inequality under spherical symmetrisation are given. That is, a characterisation for the uniqueness (up to orthogonal transformations) of the extremals is provided. This is obtained through a careful analysis of the equality cases, and studying fine properties of the circular symmetrisation, which was firstly introduced by Pólya in 1950
At what sample size do correlations stabilize?
Sample correlations converge to the population value with increasing sample size, but the estimates are often inaccurate in small samples. In this report we use Monte-Carlo simulations to determine the critical sample size from which on the magnitude of a correlation can be expected to be stable. The necessary sample size to achieve stable estimates for correlations depends on the effect size, the width of the corridor of stability (i.e., a corridor around the true value where deviations are tolerated), and the requested confidence that the trajectory does not leave this corridor any more. Results indicate that in typical scenarios the sample size should approach 250 for stable estimates
Strain-induced magma degassing: insights from simple-shear experiments on bubble bearing melts
International audienceExperiments have been performed to determine the effect of deformation on degassing of bubble-bearing melts. Cylindrical specimens of phonolitic composition, initial water content of 1.5 wt.% and 2 vol.% bubbles, have been deformed in simple-shear (torsional configuration) in an internally heated Paterson-type pressure vessel at temperatures of 798-848 K, 100-180 MPa confining pressure and different final strains. Micro-structural analyses of the samples before and after deformation have been performed in two and three dimensions using optical microscopy, a nanotomography machine and synchrotron tomography. The water content of the glasses before and after deformation has been measured using Fourier Transform Infrared Spectroscopy (FTIR). In samples strained up to a total of γ ∼ 2 the bubbles record accurately the total strain, whereas at higher strains (γ ∼ 10) the bubbles become very flattened and elongate in the direction of shear. The residual water content of the glasses remains constant up to a strain of γ ∼ 2 and then decreases to about 0.2 wt.% at γ ∼ 10. Results show that strain enhances bubble coalescence and degassing even at low bubble volume-fractions. Noticeably, deformation produced a strongly water under-saturated melt. This suggests that degassing may occur at great depths in the volcanic conduit and may force the magma to become super-cooled early during ascent to the Earth's surface potentially contributing to the genesis of obsidian
Design of a multi-purpose building "to zero energy consumption" according to european directive 2010/31/ce: Architectural and plant solutions
Considering the significant impact that the residential sector has on energy consumption, it is particularly important to implement policies aimed at improving energy efficiency in buildings for saving primary energy, and also to spread the concept of sustainable development through the use of appropriate technology and proper project criteria for new constructions. For these reasons the Municipality of Città della Pieve promoted the creation of a "Renewable Energy Park" in a deprived area of its territory, so that there were the main technologies for the production of green energy. In this context, it could not be lacking an educational/demonstrative "zero energy consumption" building for multifunctional activities realized with the most innovative techniques to save energy. The building will exemplify the optimization of the benefits derived from improved energy efficiency in synergy with systems of energy production from renewable sources, such as to make possible the transition from "passive" building to get to "active" building. In this paper we describe the technical solutions adopted both in the building envelope and the system concept for the project of that "zero energy consumption" building according to Directive 2010/31/CE. In order to validate the proposed solutions, it has also been carried out a simulation of the behaviour of the building in summer and winter so that it is possible to assess the actual benefits obtained both in terms of energy and in economic terms following the adoption of the proposed solutions
Using indirect measurement tasks to assess the self-concept of personality : a systematic review and meta-analyses
Retrieving magma composition from TIR spectra: implications for terrestrial planets investigations
Emissivity and reflectance spectra have been investigated on two series of silicate glasses, having compositions belonging to alkaline and subalkaline series, covering the most common terrestrial igneous rocks. Glasses were synthesized starting from natural end-members outcropping at Vulcano Island (Aeolian Islands, Italy) and on Snake River Plain (USA). Results show that the shift of the spectra, by taking Christiansen feature (CF) as a reference point, is correlated with SiO2 content, the SCFM factor and/or the degree of polymerization state via the NBO/T and temperature. The more evolved is the composition, the more polymerized the structure, the shorter the wavelength at which CF is observable. CF shift is also dependent on temperature. The shape of the spectra discriminates alkaline character, and it is related to the evolution of Qn structural units. Vulcano alkaline series show larger amount of Q4 and Q3 species even for mafic samples compared to the subalkaline Snake River Plain series. Our results provide new and robust insights for the geochemical characterization of volcanic rocks by remote sensing, with the outlook to infer origin of magmas both on Earth as well as on terrestrial planets or rocky bodies, from emissivity and reflectance spectra
Viscosity of Pyroxenite Melt and Its Evolution During Cooling
New viscosity experiments at superliquidus temperatures and during cooling at a rate of 10 K/hr have been performed at different shear rates on a synthetic pyroxenite melt. Results revealed that this melt is extremely fluid at temperature between 1646 and 1530 K and measured viscosities are between 2.2 and 7.8 Pa·s. Such very low viscosities allow the lava to flow in turbulent regime as confirmed by the high Reynolds numbers, which are always >2,000. As a consequence, very long distance could be covered by the lava flow. If we consider this studied composition as proxy for Mars lava flows coupled with very high effusion rates, our results might explain the presence of extraordinary large volcanic channels, as recently hypothesized for the Kasei Valles on Mars, even considering that the gravity is approximately one third that of Earth. Few literature data tracking viscosity during cooling are available, and they reported shear thinning effect on different compositions. Our experiments performed at 0.1 and 1 s−1 have shown complex variation in the apparent viscosity, confirming that nonequilibrium rheology represents a still unexplored field of investigation useful to better understand the real geological scenarios occurring in magmatic and volcanic systems. ©2019. American Geophysical Union. All Rights Reserved
Magma mixing enhanced by bubble segregation
In order to explore the materials' complexity induced by bubbles rising through mixing magmas, bubble-advection experiments have been performed, employing natural silicate melts at magmatic temperatures. A cylinder of basaltic glass was placed below a cylinder of rhyolitic glass. Upon melting, bubbles formed from interstitial air. During the course of the experimental runs, those bubbles rose via buoyancy forces into the rhyolitic melt, thereby entraining tails of basaltic liquid. In the experimental run products, these plume-like filaments of advected basalt within rhyolite were clearly visible and were characterised by microCT and high-resolution EMP analyses. The entrained filaments of mafic material have been hybridised. Their post-experimental compositions range from the originally basaltic composition through andesitic to rhyolitic composition. Rheological modelling of the compositions of these hybridised filaments yield viscosities up to 2 orders of magnitude lower than that of the host rhyolitic liquid. Importantly, such lowered viscosities inside the filaments implies that rising bubbles can ascend more efficiently through pre-existing filaments that have been generated by earlier ascending bubbles. MicroCT imaging of the run products provides textural confirmation of the phenomenon of bubbles trailing one another through filaments. This phenomenon enhances the relevance of bubble advection in magma mixing scenarios, implying as it does so, an acceleration of bubble ascent due to the decreased viscous resistance facing bubbles inside filaments and yielding enhanced mass flux of mafic melt into felsic melt via entrainment. In magma mixing events involving melts of high volatile content, bubbles may be an essential catalyst for magma mixing. Moreover, the reduced viscosity contrast within filaments implies repeated replenishment of filaments with fresh end-member melt. As a result, complex compositional gradients and therefore diffusion systematics can be expected at the filament-host melt interface, due to the repetitive nature of the process. However, previously magmatic filaments were tacitly assumed to be of single-pulse origin. Consequently, the potential for multi-pulse filaments has to be considered in outcrop analyses. As compositional profiles alone may remain ambiguous for constraining the origin of filaments, and as 3-D visual evidence demonstrates that filaments may have experienced multiple bubbles passages even when featuring standard diffusion gradients, therefore, the calculation of diffusive timescales may be inadequate for constraining timescales in cases where bubbles have played an essential role in magma mixing. Data analysis employing concentration variance relaxation in natural samples can distinguish conventional single-pulse filaments from advection via multiple bubble ascent advection in natural samples, raising the prospect of yet another powerful application of this novel petrological tool
Eruption dynamics of the 22–23 April 2015 calbuco volcano (Southern Chile): Analyses of tephra fall deposits
After 54 years since its last major eruption in 1961, Calbuco Volcano (Ensenada, Southern Chile) reawakened with few hours of warning on 22 April 2015 at 18:05 local time. The main explosive eruption consisted of two eruption pulses (lasting ~1.5 and 6 h each one) on 22 and 23 April, producing stratospheric (>15 km height) eruption columns. The erupted materials correspond to porphyritic basaltic andesite (~55 wt.% of SiO2). The tephra fall affected mainly the area northeast of the volcano and the finest ash was deposited over Southern Chile and Patagonia Argentina. We studied the tephra fall deposits of both pulses in terms of stratigraphy, distribution, volume, emplacement dynamics and eruption source parameters. Here, we show field observations that have been made 5-470 km downwind and distinguish five layers (Layers A, B, B1, C and D) representing different stages of the eruption evolution: eruption onset (Layer A; pulse 1), followed by the first paroxysmal event (Layer B; pulse 1), in some places interbedded by layer B1, tentatively representing the sedimentation of a secondary plume during the end of pulse 1. We recognized a second paroxysm (Layer C; pulse 2) followed by the waning of the eruption (Layer D; pulse 2). The total calculated bulk tephra fall deposit volume is 0.27 ± 0.007 km3 (0.11-0.13 km3 dense rock equivalent), 38% of which was erupted during the first phase and 62% during the second pulse. This eruption was a magnitude 4.45 event (VEI 4 eruption) of subPlinian type.Fil: Romero, J. E.. Universidad de Atacama; ChileFil: Morgavi, D.. Università di Perugia; ItaliaFil: Arzilli, F.. University of Manchester; Reino UnidoFil: Daga, Romina Betiana. Consejo Nacional de Investigaciones CientÃficas y Técnicas; Argentina. Comisión Nacional de EnergÃa Atómica. Centro Atómico Bariloche; ArgentinaFil: Caselli, Alberto Tomás. Consejo Nacional de Investigaciones CientÃficas y Técnicas; Argentina. Universidad Nacional de RÃo Negro; ArgentinaFil: Reckziegel, Florencia Mabel. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Centro CientÃfico Tecnológico Conicet - Salta. Instituto de Investigaciones en EnergÃa no Convencional. Universidad Nacional de Salta. Facultad de Ciencias Exactas. Departamento de FÃsica. Instituto de Investigaciones en EnergÃa no Convencional; ArgentinaFil: Viramonte, Jose German. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Centro CientÃfico Tecnológico Conicet - Salta. Instituto de Investigaciones en EnergÃa no Convencional. Universidad Nacional de Salta. Facultad de Ciencias Exactas. Departamento de FÃsica. Instituto de Investigaciones en EnergÃa no Convencional; ArgentinaFil: DÃaz Alvarado, J.. Universidad de Atacama; ChileFil: Polacci, M.. University of Manchester; Reino UnidoFil: Burton, M.. University of Manchester; Reino UnidoFil: Perugini, D.. Università di Perugia; Itali
- …