Teleprinter uses thermal printing technique

Alphameric/facsimile printer receives serial digital data in the form of a specified number of bits per group and prints it on thermally sensitive paper. A solid state shift-register memorizes the incoming serial digital data

Scaling Properties of Paths on Graphs

Let $G$ be a directed graph on finitely many vertices and edges, and assign a positive weight to each edge on $G$. Fix vertices $u$ and $v$ and consider the set of paths that start at $u$ and end at $v$, self-intersecting in any number of places along the way. For each path, sum the weights of its edges, and then list the path weights in increasing order. The asymptotic behaviour of this sequence is described, in terms of the structure and type of strongly connected components on the graph. As a special case, for a Markov chain the asymptotic probability of paths obeys either a power law scaling or a weaker type of scaling, depending on the structure of the transition matrix. This generalizes previous work by Mandelbrot and others, who established asymptotic power law scaling for special classes of Markov chains.Comment: 23 pages, 2 figure

Raman scattering in a Heisenberg {\boldmath S=1/2S=1/2} antiferromagnet on the triangular lattice

We investigate two-magnon Raman scattering from the $S=1/2$ Heisenberg antiferromagnet on the triangular lattice, considering both the effect of renormalization of the one-magnon spectrum by 1/S corrections and final-state magnon-magnon interactions. The bare Raman intensity displays two peaks related to one-magnon van-Hove singularities. We find that 1/S self-energy corrections to the one-magnon spectrum strongly modify this intensity profile. The central Raman-peak is significantly enhanced due to plateaus in the magnon dispersion, the high frequency peak is suppressed due to magnon damping, and the overall spectral support narrows considerably. Additionally we investigate final-state interactions by solving the Bethe-Salpeter equation to $O(1/S)$. In contrast to collinear antiferromagnets, the non-collinear nature of the magnetic ground state leads to an irreducible magnon scattering which is retarded and non-separable already to lowest order. We show that final-state interactions lead to a rather broad Raman-continuum centered around approximately twice the 'roton'-energy. We also discuss the dependence on the scattering geometry.Comment: 7 pages, 5 figure

Low cost fabrication development for oxide dispersion strengthened alloy vanes

Viable processes were developed for secondary working of oxide dispersion strengthened (ODS) alloys to near-net shapes (NNS) for aircraft turbine vanes. These processes were shown capable of producing required microstructure and properties for vane applications. Material cost savings of 40 to 50% are projected for the NNS process over the current procedures which involve machining from rectangular bar. Additional machining cost savings are projected. Of three secondary working processes evaluated, directional forging and plate bending were determined to be viable NNS processes for ODS vanes. Directional forging was deemed most applicable to high pressure turbine (HPT) vanes with their large thickness variations while plate bending was determined to be most cost effective for low pressure turbine (LPT) vanes because of their limited thickness variations. Since the F101 LPT vane was selected for study in this program, development of plate bending was carried through to establishment of a preliminary process. Preparation of ODS alloy plate for bending was found to be a straight forward process using currently available bar stock, providing that the capability for reheating between roll passes is available. Advanced ODS-NiCrAl and ODS-FeCrAl alloys were utilized on this program. Workability of all alloys was adequate for directional forging and plate bending, but only the ODS-FeCrAl had adequate workability for shaped preform extrustion

Investigation of Effectiveness of Air-Heating a Hollow Steel Propeller for Protection Against Icing. 3: 25% Partitioned Blades

The icing protection obtained from an internally air-heated propeller blade partitioned to confine the heated air forward of 25-percent chord was investigated in the NACA Cleveland icing research tunnel. A production-model hollow steel propeller was modified with an Internal radial partition at 25-percent chord and with shank and tip openings to admit and exhaust the heated air. Temperatures were measured on the blade surfaces and in the heated-air system during tunnel icing conditions. Heat-exchanger effectiveness and photographs of Ice formations on the blades were obtained. Surface temperature measurements indicated that confining the heated air forward of the 25-percent chord gave.a more economical distribution of the applied heat as compared with unpartitioned and 50-percent partitioned blades, by dissipating a greater percentage of the available heat at the leading edge. At a propeller speed of 850 rpm, a heating rate of 7000 Btu per hour per blade at a shank air temperature of 400 F provided adequate Icing protection at ambient-air temperatures of 23 F but not at temperatures as low as 15 F. With the heating rate used, a heat-exchanger effectiveness of 77 percent was obtained as compared to 56 percent for 50-percent partitioned and 47 percent for unpartitioned blades

How will disenfranchised Peoples adapt to Climate Change? Strengthening the Ecojustice Movement

The Fourth assessment of the Intergovernmental Panel on Climate Change (IPCC) acknowledged That millions of people are currently, and will increasingly be, affected by the impacts of climate change, in the form of floods, droughts and other extreme events, as well as related threats to food security. In response to these global environmental changes, the international community, including civil society, is acting on the need for immediate adaptation measures and is developing strategies for future adaptation. However, the impacts of climate change are unevenly distributed, with many of the poorest, most vulnerable peoples experiencing the immediate effects of climate change, in the here and now. As the IPCC noted, developing countries are disproportionately affected by climate change and often, the least able to adapt due to lack of infrastructure and resources

Rigid open-cell polyurethane foam for cryogenic insulation

Lightweight polyurethane foam assembled in panels is effective spacer material for construction of self-evacuating multilayer insulation panels for cryogenic liquid tanks. Spacer material separates radiation shields with barrier that minimizes conductive and convective heat transfer between shields

Statistical Study of Aircraft Icing Probabilities at the 700- and 500- Millibar Levels over Ocean Areas in the Northern Hemisphere

A statistical study is made of icing data reported from weather reconnaissance aircraft flown by Air Weather Service (USAF). The weather missions studied were flown at fixed flight levels of 500 millibars (18,000 ft) and 700 millibars (10,000 ft) over wide areas of the Pacific, Atlantic, and Arctic Oceans. This report is presented as part of a program conducted by the NACA to obtain extensive icing statistics relevant to aircraft design and operation. The thousands of in-flight observations recorded over a 2- to 4-year period provide reliable statistics on icing encounters for the specific areas, altitudes, and seasons included in the data. The relative frequencies of icing occurrence are presented, together with the estimated icing probabilities and the relation of these probabilities to the frequencies of flight in clouds and cloud temperatures. The results show that aircraft operators can expect icing probabilities to vary widely throughout the year from near zero in the cold Arctic areas in winter up to 7 percent in areas where greater cloudiness and warmer temperatures prevail. The data also reveal a general tendency of colder cloud temperatures to reduce the probability of icing in equally cloudy conditions