Equivalent stress block for normal-strength concrete incorporating strain gradient effect

To account for the different behaviours of concrete under uniaxial compression and bending in the flexural strength design of reinforced concrete (RC) members, the stress-strain curve of concrete is normally scaled down so that the adopted maximum concrete stress in flexural members is less than the uniaxial strength. However, it was found from previous experimental research that the use of a smaller maximum concrete stress would underestimate the flexural strength of RC beams and columns. To investigate the effect of strain gradient on the maximum concrete stress developed in flexure, a total of 12 plain concrete and RC inverted T-shaped specimens were fabricated and tested under concentric and eccentric loads separately. The maximum concrete stress developed in the eccentric specimens was determined by modifying the concrete stress-strain curve obtained from the counterpart concentric specimens based on axial force and moment equilibriums. The test results revealed that the maximum concrete stress increases with strain gradient up to a certain maximum value. A formula was developed to correlate the maximum concrete stress to strain gradient. A pair of equivalent rectangular concrete stress block parameters that incorporate the effects of strain gradient was proposed for flexural strength design of RC members. © 2012 Thomas Telford Ltd.published_or_final_versio

Tunable ultranarrow linewidth of cavity induced by interacting dark resonances

A scheme for getting a tunable ultranarrow linewidth of a cavity due to an embedded four-level atomic medium with double-dark resonances is proposed. It is shown that the steep dispersion induced by double-dark resonances in the transparency window leads to the ultranarrow transmission peak. Compared with the case of a single-dark-resonance system, the linewidth can be narrowed even by one order under proper conditions. Furthermore, the position of the ultranarrow peak can be engineered by varying the intensity and detuning of the control field.Comment: 4 pages, 5 figure

Band structure engineering in (Bi1-xSbx)2Te3 ternary topological insulators

Three-dimensional (3D) topological insulators (TI) are novel quantum materials with insulating bulk and topologically protected metallic surfaces with Dirac-like band structure. The spin-helical Dirac surface states are expected to host exotic topological quantum effects and find applications in spintronics and quantum computation. The experimental realization of these ideas requires fabrication of versatile devices based on bulk-insulating TIs with tunable surface states. The main challenge facing the current TI materials exemplified by Bi2Se3 and Bi2Te3 is the significant bulk conduction, which remains unsolved despite extensive efforts involving nanostructuring, chemical doping and electrical gating. Here we report a novel approach for engineering the band structure of TIs by molecular beam epitaxy (MBE) growth of (Bi1-xSbx)2Te3 ternary compounds. Angle-resolved photoemission spectroscopy (ARPES) and transport measurements show that the topological surface states exist over the entire composition range of (Bi1-xSbx)2Te3 (x = 0 to 1), indicating the robustness of bulk Z2 topology. Most remarkably, the systematic band engineering leads to ideal TIs with truly insulating bulk and tunable surface state across the Dirac point that behave like one quarter of graphene. This work demonstrates a new route to achieving intrinsic quantum transport of the topological surface states and designing conceptually new TI devices with well-established semiconductor technology.Comment: Minor changes in title, text and figures. Supplementary information adde

Enhanced photodynamic destruction of a transplantable fibrosarcoma using photochemical internalisation of gelonin

Photochemical internalisation (PCI) is a technique for releasing biologically active macromolecules from endocytic vesicles by light activation of a photosensitiser localised in the same vesicles of targeted cells. This study investigated the PCI of the toxin gelonin as a way of enhancing the effect of photodynamic therapy (PDT) on a human malignant fibrous histiocytoma transplanted into nude mice using the photosensitiser disulphonated aluminium phthalocyanine (AlPcS2a). Pharmacokinetic studies after intraperitoneal administration showed that the serum level of AlPcS2a fitted a biexponential model (half-lives of 1.8 and 26.7 h). The tumour concentration was roughly constant up to 48 h, although fluorescence microscopy showed that the drug location was initially mainly vascular, but became intracellular by 48 h. To compare PDT with PCI, 48 h after intraperitoneal injection of 10 mg kg−1 AlPcS2a, and 6 h after direct intratumour injection of 50 μg gelonin (PCI) or a similar volume of phosphate-buffered saline (PDT controls), tumour-bearing animals were exposed to red light (150 J cm−2). Complete response was observed for more than 100 days in 50% of the PCI tumours but only 10% of the PDT tumours (P<0.01). In tumours examined histologically 4 days after light delivery, the depth of necrosis was 3–4 mm after PDT, but 7 mm after PCI. The deeper effect after PCI demonstrates that the light fluence needed to kill tumour is less than with PDT. We conclude that PCI with gelonin can markedly enhance the effect of PDT on this type of tumour and may have a role clinically as an adjunct to surgery to control localised disease

The N-terminal intrinsically disordered domain of mgm101p is localized to the mitochondrial nucleoid.

The mitochondrial genome maintenance gene, MGM101, is essential for yeasts that depend on mitochondrial DNA replication. Previously, in Saccharomyces cerevisiae, it has been found that the carboxy-terminal two-thirds of Mgm101p has a functional core. Furthermore, there is a high level of amino acid sequence conservation in this region from widely diverse species. By contrast, the amino-terminal region, that is also essential for function, does not have recognizable conservation. Using a bioinformatic approach we find that the functional core from yeast and a corresponding region of Mgm101p from the coral Acropora millepora have an ordered structure, while the N-terminal domains of sequences from yeast and coral are predicted to be disordered. To examine whether ordered and disordered domains of Mgm101p have specific or general functions we made chimeric proteins from yeast and coral by swapping the two regions. We find, by an in vivo assay in S.cerevisiae, that the ordered domain of A.millepora can functionally replace the yeast core region but the disordered domain of the coral protein cannot substitute for its yeast counterpart. Mgm101p is found in the mitochondrial nucleoid along with enzymes and proteins involved in mtDNA replication. By attaching green fluorescent protein to the N-terminal disordered domain of yeast Mgm101p we find that GFP is still directed to the mitochondrial nucleoid where full-length Mgm101p-GFP is targeted

Micro-manufacturing : research, technology outcomes and development issues

Besides continuing effort in developing MEMS-based manufacturing techniques, latest effort in Micro-manufacturing is also in Non-MEMS-based manufacturing. Research and technological development (RTD) in this field is encouraged by the increased demand on micro-components as well as promised development in the scaling down of the traditional macro-manufacturing processes for micro-length-scale manufacturing. This paper highlights some EU funded research activities in micro/nano-manufacturing, and gives examples of the latest development in micro-manufacturing methods/techniques, process chains, hybrid-processes, manufacturing equipment and supporting technologies/device, etc., which is followed by a summary of the achievements of the EU MASMICRO project. Finally, concluding remarks are given, which raise several issues concerning further development in micro-manufacturing

Variable responses of human microbiomes to dietary supplementation with resistant starch

Abstract Background The fermentation of dietary fiber to various organic acids is a beneficial function provided by the microbiota in the human large intestine. In particular, butyric acid contributes to host health by facilitating maintenance of epithelial integrity, regulating inflammation, and influencing gene expression in colonocytes. We sought to increase the concentration of butyrate in 20 healthy young adults through dietary supplementation with resistant starch (unmodified potato starch—resistant starch (RS) type 2). Methods Fecal samples were collected from individuals to characterize butyrate concentration via liquid chromatography and composition of the microbiota via surveys of 16S rRNA-encoding gene sequences from the Illumina MiSeq platform. Random Forest and LEfSe analyses were used to associate responses in butyrate production to features of the microbiota. Results RS supplementation increased fecal butyrate concentrations in this cohort from 8 to 12 mmol/kg wet feces, but responses varied widely between individuals. Individuals could be categorized into three groups based upon butyrate concentrations before and during RS: enhanced, high, and low (n = 11, 3, and 6, respectively). Fecal butyrate increased by 67 % in the enhanced group (from 9 to 15 mmol/kg), while it remained ≥11 mmol/kg in the high group and ≤8 mmol/kg in the low group. Microbiota analyses revealed that the relative abundance of RS-degrading organisms—Bifidobacterium adolescentis or Ruminococcus bromii—increased from ~2 to 9 % in the enhanced and high groups, but remained at ~1.5 % in the low group. The lack of increase in RS-degrading bacteria in the low group may explain why there was no increase in fecal butyrate in response to RS. The microbiota of individuals in the high group were characterized by an elevated abundance of the butyrogenic microbe Eubacterium rectale (~6 % in high vs. 3 % in enhanced and low groups) throughout the study. Conclusions We document the heterogeneous responses in butyrate concentrations upon RS supplementation and identify characteristic of the microbiota that appear to underlie this variation. This study complements and extends other studies that call for personalized approaches to manage beneficial functions provided by gut microbiomes.http://deepblue.lib.umich.edu/bitstream/2027.42/134598/1/40168_2016_Article_178.pd

Two naphthalene degrading bacteria belonging to the genera Paenibacillus and Pseudomonas isolated from a highly polluted lagoon perform different sensitivities to the organic and heavy metal contaminants

Two bacterial strains were isolated in the presence of naphthalene as the sole carbon and energy source from sediments of the Orbetello Lagoon, Italy, which is highly contaminated with both organic compounds and metals. 16S rRNA gene sequence analysis of the two isolates assigned the strains to the genera Paenibacillus and Pseudomonas. The effect of different contaminants on the growth behaviors of the two strains was investigated. Pseudomonas sp. ORNaP2 showed a higher tolerance to benzene, toluene, and ethylbenzene than Paenibacillus sp. ORNaP1. In addition, the toxicity of heavy metals potentially present as co-pollutants in the investigated site was tested. Here, strain Paenibacillus sp. ORNaP1 showed a higher tolerance towards arsenic, cadmium, and lead, whereas it was far more sensitive towards mercury than strain Pseudomonas sp. ORNaP2. These differences between the Gram-negative Pseudomonas and the Gram-positive Paenibacillus strain can be explained by different general adaptive response systems present in the two bacteria