An Opening Profile Recognition Method for Magnetic Flux Leakage Signals of Defect

The defect opening profile recognition is of great concern in the magnetic flux leakage (MFL) measurement technique. The detected spatial MFL signal has three components: horizontal, vertical, and normal components. Horizontal and normal component signals are commonly used to estimate the defect profile, while the vertical component has always been neglected. With the development of the high resolution and the 3-D MFL testing techniques, the vertical component signal is becoming more available. This paper analyzes the essential right-angle features of the vertical component signal, which is useful for the defect opening profile recognition. After obtaining the initial profile from the horizontal or normal component, the types of the right angle is identified from the vertical component, and the opening profile is further optimized based on these right-angle features. The opening profile recognition method is put forward in this paper to improve the accuracy of the recognition result of the defect. Both simulation and experimental tests are conducted to verify the good performance of the proposed method. Compared with the opening profiles recognized merely by the horizontal component signal, the proposed method shows better recognition results, which also validates that the vertical component signal can also be a useful information for the defect estimation

Effective Focal Area Dimension Optimization of Shear Horizontal Point-Focusing EMAT Using Orthogonal Test Method

To overcome the shortcomings of low energy conversion efficiency of electromagnetic acoustic transducers (EMATs), point-focusing shear horizontal (PFSH) wave EMAT is used to focus the wave energy into a specific area. Many factors will affect the capability of the focusing transducer, and in addition to considering the signal intensity, the detection accuracy is also required to be investigated. Specifically, to simplify the test process, we use the orthogonal test method to study the effect of different influence parameters on signal intensity and focal area dimensions. Seven factors are selected, and three results are determined in the test. Range analysis shows that for signal amplitude M , the top three impact factors are the coil width w , coil turns n , and focal length lF (equal to bandwidth factor α ). Moreover, magnet number m and frequency fc dominate the effective focal length lfd , and aperture angle θ determines the effective focal width wfd . To enable higher signal intensity and smaller focal area dimensions, it is necessary to consider various factors on the PFSH-EMAT focusing performance. The test’s signal intensity with optimized parameters’ combination at the focal point is nearly 144.42% higher than the average of all the tests, lfd decreased by 37.84%, and wfd decreased by 50.59%. The experiment also verified that focusing EMAT with optimized parameters has a better focusing performance

Defect detection and identification of point-focusing shear-horizontal EMAT for plate inspection

As a kind of nondestructive testing (NDT) method, shear-horizontal (SH)-guided wave detection technology is widely used on an electromagnetic acoustic transducer (EMAT). Although ultrasonic-guided waves perform well in defect location, it is difficult to obtain detailed information about defects, and the low efficiency of EMAT energy conversion still reduces the EMAT’s performance. Therefore, in this work, the defect detection method of different shapes and sizes by point-focusing shear-horizontal (PFSH)-guided wave EMAT with the use of periodic permanent magnet (PPM) is investigated through simulation and experiment. For the purpose of defect classification and quantification, the extraction principles of defect features are obtained through simulation based on the circumferential scatter diagrams, and the neural network (NN) is used to process the features extracted from the experimental data. The results show that by extracting effective defect features from the scatter diagram, high-accuracy classification and high-precision quantification of defects under the influence of the focusing transducer can be achieved

Quantum noise limited nanoparticle detection with exposed-core fiber

Label-free biosensors are important tools for clinical diagnostics and for studying biology at the single molecule level. The development of optical label-free sensors has allowed extreme sensitivity but can expose the biological sample to photodamage. Moreover, the fragility and complexity of these sensors can be prohibitive to applications. To overcome these problems, we develop a quantum noise limited exposed-core fiber sensor providing robust platform for label-free biosensing with a natural path toward microfluidic integration. We demonstrate the detection of single nanoparticles down to 25 nm in radius with optical intensities beneath known biophysical damage thresholds.Nicolas P. Mauranyapin, Lars S. Madsen, Larnii Booth, Lu Peng, Stephen C. Warren-Smith, Erik P. Schartner, Heike Ebendorff-Heidepriem and Warwick P. Bowe

Energy Loss versus Shadowing in the Drell-Yan Reaction on Nuclei

We present a new analysis of the E772 and E866 experiments on the nuclear dependence of Drell-Yan (DY) lepton pair production resulting from the bombardment of $^2H$, Be, C, Ca, Fe, and W targets by 800 GeV/c protons at Fermilab. We employ a light-cone formulation of the DY reaction in the rest frame of the nucleus, where the dimuons detected at small values of Bjorken x_2 << 1 may be considered to originate from the decay of a heavy photon radiated from an incident quark in a bremsstrahlung process. We infer the energy loss of the quark by examining the suppression of the nuclear-dependent DY ratios seen as a function of projectile momentum fraction x_1 and dimuon mass M. Shadowing, which also leads to nuclear suppression of dimuons, is calculated within the same approach employing the results of phenomenological fits to deep inelastic scattering data from HERA. The analysis yields -dE/dz =2.73 +/- 0.37 +/- 0.5 GeV/fm for the rate of quark energy loss per unit path length, a value consistent with theoretical expectations including the effects of the inelastic interaction of the incident proton at the surface of the nucleus. This is the first observation of a nonzero energy loss effect in such experiments.Comment: 43 pages including 17 figure

The improvement of Pd nanoclusters electro-catalytic properties for FAO by the addition of Co element

Conference Name:2014 International Conference on Materials Science and Engineering Technology, MSET 2014. Conference Address: Shanghai, China. Time:June 28, 2014 - June 29, 2014.East China University of Science and Technology; Engineering and Industry Technology Institute; Shanghai JiaoTong University; Shanghai University of Engineering ScienceNear-monodisperse Pd and PdCo nanoclusters were synthesized by physical vapor deposition using a plasma-gas-condensation cluster deposition system and tested for catalyzing formic acid oxidation. Under the condition of high vacuum and inert gas, NCs with clean surface and uniform size were obtained. The cyclic voltammetry tests revealed that the electrochemical surface area was increased from 49.7 m2 g-1 to 51.7 m2 g-1 and the peak current density of catalyzing FAO was raised from 0.115 mA cm-2 to 0.125 mA cm-2 when about 12wt. % Co element was added. Additionally, the tolerance to CO poisoning of Pd could also be improved by the addition of Co. The result indicated that this method offered a chemical-free way to prepare clean and efficient Pd-based nanoscale catalytics and encouraged deeper exploration for electrochemichal catalytic reactions. ? (2014) Trans Tech Publications, Switzerland

Political networking strategy and firm performance: a moderated mediation model

Purpose By incorporating the resource-based view with the dynamic capability view, this study aims to examine the link between corporate political networking strategy and firm performance in transition economies by focusing on the mediating role of corporate entrepreneurship and the moderating role of dysfunctional competition. Design/methodology/approach A large-scale questionnaire survey was conducted among 1,300 senior managers from 650 enterprises in China, and valid survey data were obtained from 401 enterprises. Findings Empirical results demonstrate that political networking strategy is positively related to firm performance and that this relationship is fully mediated by corporate entrepreneurship. Moderated path analysis indicates that dysfunctional competition strengthens the direct effect of political networking strategy on corporate entrepreneurship and its indirect effect on firm performance via corporate entrepreneurship. Originality/value This research is among the first to examine the mediating mechanism underlying the relationship between political networking strategy and firm performance in the context of transition economies. In addition, existing research has seldom discussed the effects on corporate entrepreneurship of external resource acquisition from government sources. This research fills this important gap and identifies the condition under which political networking benefits corporate entrepreneurship

Direct Measurements of the Branching Fractions for D0→K−e+νeD^0 \to K^-e^+\nu_e and D0→π−e+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

The absolute branching fractions for the decays $D^0 \to K^-e ^+\nu_e$ and $D^0 \to \pi^-e^+\nu_e$ are determined using $7584\pm 198 \pm 341$ singly tagged $\bar D^0$ sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged $\bar D^0$ meson, $104.0\pm 10.9$ events for $D^0 \to K^-e ^+\nu_e$ and $9.0 \pm 3.6$ events for $D^0 \to \pi^-e^+\nu_e$ decays are observed. Those yield the absolute branching fractions to be $BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)$ and $BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)$. The vector form factors are determined to be $|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03$ and $|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06$. The ratio of the two form factors is measured to be $|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07$.Comment: 6 pages, 5 figure

A fucoidan plant drink reduces Helicobacter pylori load in the stomach: a real-world study

BACKGROUND: Helicobacter pylori (Hp) infection is highly prevalent globally and is predominantly managed by antibiotics. Recently, the anti-adhesive, antioxidant, antitoxin, immunomodulatory, anti-coagulant, and anti-infective activities of fucoidan, a polysaccharide extracted from brown seaweeds, have been widely studied, and the results showed promise. Fucoidan has the potential to be utilized in Hp eradication therapy. Our present clinical study was designed to evaluate the efficiency of Lewuyou®, a fucoidan plant drink (FPD) in eradicating Hp in humans. METHODS: This multi-center, clinical study was conducted between October 2020 and July 2021. Hp infection was confirmed by urea breath test (UBT). A total of 122 patients with confirmed Hp infection were enrolled; after exclusion of incomplete data, 85 eligible patients (37 males and 48 females aged 20–81 years) were included in the final analysis. FPD (50 mL per vial) was orally administered twice daily for a 4-week cycle, and 41 patients completed an 8-week cycle. RESULTS: No adverse event (AE) was reported in all 122 participants who had consumed FPD. The Hp eradication rate and clearance rate were 77.6% (66/85) and 20.0% (17/85), respectively, after 4 weeks of FPD consumption and 80.5% (33/41) and 26.8 (11/41) , respectively, after 8 weeks of consumption. CONCLUSIONS: The 4- and 8-week protocols of FPD consumption were safe and effective at reducing Hp load on the gastric mucosa, with Hp eradicated in the majority of participants