The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact

The influence of specimen hardness (between 275 kgf mm−2 and 835 kgf mm−2) in an AISI Type O1 steel-on-steel fretting contact was examined. In equal-hardness pairs, a variation in the wear volume of around 20% across the range of hardnesses examined was observed. However, in pairs where the two specimens in the couple had different hardnesses, a critical hardness differential threshold existed, above which the wear was predominantly associated with the harder specimen (with debris embedment on the softer specimen surface). This retention of debris provides protection of that surface from further wear and also results in accelerated wear of the harder counterface due to abrasion by the oxide debris bed which has built up on the opposing specimen

The hydration state of HO−^-(aq)

The HO$^-$(aq) ion participates in myriad aqueous phase chemical processes of biological and chemical interest. A molecularly valid description of its hydration state, currently poorly understood, is a natural prerequisite to modeling chemical transformations involving HO$^-$(aq). Here it is shown that the statistical mechanical quasi-chemical theory of solutions predicts that $\mathrm{HO\cdot[H_2O]_3{}^-}$ is the dominant inner shell coordination structure for HO$^-$(aq) under standard conditions. Experimental observations and other theoretical calculations are adduced to support this conclusion. Hydration free energies of neutral combinations of simple cations with HO$^-$(aq) are evaluated and agree well with experimental values.Comment: 10 pages, 1 figur

Australian Group on Antimicrobial Resistance Australian Enterococcal Sepsis Outcome Programme annual report, 2014

From 1 January to 31 December 2014, 27 institutions around Australia participated in the Australian Enterococcal Sepsis Outcome Programme (AESOP). The aim of AESOP 2014 was to determine the proportion of enterococcal bacteraemia isolates in Australia that were antimicrobial resistant, and to characterise the molecular epidemiology of the Enterococcus faecium isolates. Of the 952 unique episodes of bacteraemia investigated, 94.4% were caused by either E. faecalis (54.9%) or E. faecium (39.9%). Ampicillin resistance was detected in 0.6% of E. faecalis and in 89.4% of E. faecium. Vancomycin non-susceptibility was reported in 0.2% and 46.1% of E. faecalis and E. faecium respectively. Overall 51.1% of E. faecium harboured vanA or vanB genes. For the vanA/B positive E. faecium isolates, 81.5% harboured vanB genes and 18.5% vanA genes. The percentage of E. faecium bacteraemia isolates resistant to vancomycin in Australia is significantly higher than that seen in most European countries. E. faecium consisted of 113 pulsed-field gel electrophoresis pulsotypes of which 68.9% of isolates were classified into 14 major pulsotypes containing 5 or more isolates. Multilocus sequence typing grouped the 14 major pulsotypes into clonal cluster 17, a major hospital-adapted polyclonal E. faecium cluster. The geographical distribution of the 4 predominant sequence types (ST203, ST796, ST555 and ST17) varied with only ST203 identified across most regions of Australia. Overall 74.7% of isolates belonging to the four predominant STs harboured vanA or vanB genes. In conclusion, the AESOP 2014 has shown enterococcal bacteraemias in Australia are frequently caused by polyclonal ampicillin-resistant high-level gentamicin resistant vanA or vanB E. faecium, which have limited treatment options

Australian Group on Antimicrobial Resistance Australian Staphylococcus aureus Sepsis Outcome Programme annual report, 2014

From 1 January to 31 December 2014, 27 institutions around Australia participated in the Australian Staphylococcal Sepsis Outcome Programme (ASSOP). The aim of ASSOP 2014 was to determine the proportion of Staphylococcus aureus bacteraemia (SAB) isolates in Australia that are antimicrobial resistant, with particular emphasis on susceptibility to methicillin and to characterise the molecular epidemiology of the isolates. Overall, 18.8% of the 2,206 SAB episodes were methicillin resistant, which was significantly higher than that reported in most European countries. The 30-day all-cause mortality associated with methicillin-resistant SAB was 23.4%, which was significantly higher than the 14.4% mortality associated with methicillin-sensitive SAB (P <0.0001). With the exception of the beta-lactams and erythromycin, antimicrobial resistance in methicillin-sensitive S. aureus remains rare. However in addition to the beta-lactams, approximately 50‰ of methicillin-resistant S. aureus (MRSA) were resistant to erythromycin and ciprofloxacin and approximately 15% were resistant to co-trimoxazole, tetracycline and gentamicin. When applying the European Committee on Antimicrobial Susceptibility Testing breakpoints, teicoplanin resistance was detected in 2 S. aureus isolates. Resistance was not detected for vancomycin or linezolid. Resistance to non-beta-lactam antimicrobials was largely attributable to 2 healthcare-associated MRSA clones; ST22-IV [2B] (EMRSA-15) and ST239-III [3A] (Aus-2/3 EMRSA). ST22-IV [2B] (EMRSA-15) has become the predominant healthcare associated clone in Australia. Sixty per cent of methicillin-resistant SAB were due to community-associated (CA) clones. Although polyclonal, almost 44% of community-associated clones were characterised as ST93-IV [2B] (Queensland CA-MRSA) and ST1-IV [2B] (WA1). CA-MRSA, in particular the ST45-V [5C2&5] (WA84) clone, has acquired multiple antimicrobial resistance determinants including ciprofloxacin, erythromycin, clindamycin, gentamicin and tetracycline. As CA-MRSA is well established in the Australian community it is important that antimicrobial resistance patterns in community and healthcare-associated SAB is monitored as this information will guide therapeutic practices in treating S. aureus sepsis

Molecular Dynamics Simulation of Sympathetic Crystallization of Molecular Ions

It is shown that the translational degrees of freedom of a large variety of molecules, from light diatomic to heavy organic ones, can be cooled sympathetically and brought to rest (crystallized) in a linear Paul trap. The method relies on endowing the molecules with an appropriate positive charge, storage in a linear radiofrequency trap, and sympathetic cooling. Two well--known atomic coolant species, ${}^9{\hbox{Be}}^+$ and ${}^{137}{\hbox{Ba}}^+$, are sufficient for cooling the molecular mass range from 2 to 20,000 amu. The large molecular charge required for simultaneous trapping of heavy molecules and of the coolant ions can easily be produced using electrospray ionization. Crystallized molecular ions offer vast opportunities for novel studies.Comment: Accepted for publication in Phys. Rev.

Correlating three-dimensional morphology with function in PBDB-T:IT-M non-fullerene organic solar cells

In this work, the correlation between three‐dimensional morphology and device performance of PBDB‐T:IT‐M non‐fullerene organic solar cells is investigated. We found that a PBDB‐T‐rich top layer formed when the PBDB‐T:IT‐M film is cast on PEDOT:PSS, indicating a vertical component distribution that will hinder electron transport toward the cathode in a conventional device. This PBDB‐T‐rich top layer remained upon low‐temperature annealing at 80 °C, but disappeared when the annealing temperature is raised, resulting in an optimum annealing temperature of 160 °C for conventional devices as the removal of this polymer‐rich layer facilitates electron transport toward the top cathode layer. The PBDB‐T‐rich layer is also found in the surface region of the PBDB‐T:IT‐M film cast on a TiO2 substrate, but in this case it remained after thermal annealing at 80 or 160 °C, leading to a favorable vertical stratification for efficient charge collection in inverted devices. Although thermal annealing can enhance the crystallinity of PBDB‐T:IT‐M blend and lead to improved charge mobility, the correlation length of the PBDB‐T component increased excessively under annealing at 160 °C. Further, the packing of IT‐M clusters became loose upon high temperature annealing, an effect we believe results in more diffuse interfaces with PBDB‐T that result in reduced charge separation efficiency, consequently reducing the short‐circuit current in the inverted devices

Anthropogenic pressures and life history predict trajectories of seagrass meadow extent at a global scale

Seagrass meadows are threatened by multiple pressures, jeopardizing the many benefits they provide to humanity and biodiversity, including climate regulation and food provision through fisheries production. Conservation of seagrass requires identification of the main pressures contributing to loss and the regions most at risk of ongoing loss. Here, we model trajectories of seagrass change at the global scale and show they are related to multiple anthropogenic pressures but that trajectories vary widely with seagrass life-history strategies. Rapidly declining trajectories of seagrass meadow extent (>25% loss from 2000 to 2010) were most strongly associated with high pressures from destructive demersal fishing and poor water quality. Conversely, seagrass meadow extent was more likely to be increasing when these two pressures were low. Meadows dominated by seagrasses with persistent life-history strategies tended to have slowly changing or stable trajectories, while those with opportunistic species were more variable, with a higher probability of either rapidly declining or rapidly increasing. Global predictions of regions most at risk for decline show high-risk areas in Europe, North America, Japan, and southeast Asia, including places where comprehensive long-term monitoring data are lacking. Our results highlight where seagrass loss may be occurring unnoticed and where urgent conservation interventions are required to reverse loss and sustain their essential services

Optimum electrode configurations for fast ion separation in microfabricated surface ion traps

For many quantum information implementations with trapped ions, effective shuttling operations are important. Here we discuss the efficient separation and recombination of ions in surface ion trap geometries. The maximum speed of separation and recombination of trapped ions for adiabatic shuttling operations depends on the secular frequencies the trapped ion experiences in the process. Higher secular frequencies during the transportation processes can be achieved by optimising trap geometries. We show how two different arrangements of segmented static potential electrodes in surface ion traps can be optimised for fast ion separation or recombination processes. We also solve the equations of motion for the ion dynamics during the separation process and illustrate important considerations that need to be taken into account to make the process adiabatic