7 research outputs found

    Biological Lignocellulose Solubilization: Comparative Evaluation of Biocatalysts and Enhancement Via Cotreatment

    Get PDF
    Feedstock recalcitrance is the most important barrier impeding cost-effective production of cellulosic biofuels. Pioneer commercial cellulosic ethanol facilities employ thermochemical pretreatment and addition of fungal cellulase, reflecting the main research emphasis in the field. However, it has been suggested that it may be possible to process cellulosic biomass without thermochemical pretreatment using thermophilic, cellulolytic bacteria. To further explore this idea, we examine the ability of various biocatalysts to solubilize autoclaved but otherwise unpretreated cellulosic biomass under controlled but not industrial conditions

    Erratum to: Methods for evaluating medical tests and biomarkers

    Get PDF
    [This corrects the article DOI: 10.1186/s41512-016-0001-y.]

    Evidence synthesis to inform model-based cost-effectiveness evaluations of diagnostic tests: a methodological systematic review of health technology assessments

    Get PDF
    Background: Evaluations of diagnostic tests are challenging because of the indirect nature of their impact on patient outcomes. Model-based health economic evaluations of tests allow different types of evidence from various sources to be incorporated and enable cost-effectiveness estimates to be made beyond the duration of available study data. To parameterize a health-economic model fully, all the ways a test impacts on patient health must be quantified, including but not limited to diagnostic test accuracy. Methods: We assessed all UK NIHR HTA reports published May 2009-July 2015. Reports were included if they evaluated a diagnostic test, included a model-based health economic evaluation and included a systematic review and meta-analysis of test accuracy. From each eligible report we extracted information on the following topics: 1) what evidence aside from test accuracy was searched for and synthesised, 2) which methods were used to synthesise test accuracy evidence and how did the results inform the economic model, 3) how/whether threshold effects were explored, 4) how the potential dependency between multiple tests in a pathway was accounted for, and 5) for evaluations of tests targeted at the primary care setting, how evidence from differing healthcare settings was incorporated. Results: The bivariate or HSROC model was implemented in 20/22 reports that met all inclusion criteria. Test accuracy data for health economic modelling was obtained from meta-analyses completely in four reports, partially in fourteen reports and not at all in four reports. Only 2/7 reports that used a quantitative test gave clear threshold recommendations. All 22 reports explored the effect of uncertainty in accuracy parameters but most of those that used multiple tests did not allow for dependence between test results. 7/22 tests were potentially suitable for primary care but the majority found limited evidence on test accuracy in primary care settings. Conclusions: The uptake of appropriate meta-analysis methods for synthesising evidence on diagnostic test accuracy in UK NIHR HTAs has improved in recent years. Future research should focus on other evidence requirements for cost-effectiveness assessment, threshold effects for quantitative tests and the impact of multiple diagnostic tests

    Erratum to: Methods for evaluating medical tests and biomarkers

    Get PDF
    [This corrects the article DOI: 10.1186/s41512-016-0001-y.]

    Biological lignocellulose solubilization: comparative evaluation of biocatalysts and enhancement via cotreatment

    No full text
    BACKGROUND: Feedstock recalcitrance is the most important barrier impeding cost-effective production of cellulosic biofuels. Pioneer commercial cellulosic ethanol facilities employ thermochemical pretreatment and addition of fungal cellulase, reflecting the main research emphasis in the field. However, it has been suggested that it may be possible to process cellulosic biomass without thermochemical pretreatment using thermophilic, cellulolytic bacteria. To further explore this idea, we examine the ability of various biocatalysts to solubilize autoclaved but otherwise unpretreated cellulosic biomass under controlled but not industrial conditions. RESULTS: Carbohydrate solubilization of mid-season harvested switchgrass after 5 days ranged from 24 % for Caldicellulosiruptor bescii to 65 % for Clostridium thermocellum, with intermediate values for a thermophilic horse manure enrichment, Clostridium clariflavum, Clostridium cellulolyticum, and simultaneous saccharification and fermentation (SSF) featuring a fungal cellulase cocktail and yeast. Under a variety of conditions, solubilization yields were about twice as high for C. thermocellum compared to fungal cellulase. Solubilization of mid-season harvested switchgrass was about twice that of senescent switchgrass. Lower yields and greater dependence on particle size were observed for Populus as compared to switchgrass. Trends observed from data drawn from six conversion systems and three substrates, including both time course and end-point data, were (1) equal fractional solubilization of glucan and xylan, (2) no biological solubilization of the non-carbohydrate fraction of biomass, and (3) higher solubilization for three of the four bacterial cultures tested as compared to the fungal cellulase system. Brief (5 min) ball milling of solids remaining after fermentation of senescent switchgrass by C. thermocellum nearly doubled carbohydrate solubilization upon reinnoculation as compared to a control without milling. Greater particle size reduction and solubilization were observed for milling of partially fermented solids than for unfermented solids. Physical disruption of cellulosic feedstocks after initiation of fermentation, termed cotreatment, warrants further study. CONCLUSIONS: While the ability to achieve significant solubilization of minimally pretreated switchgrass is widespread, a fivefold difference between the most and least effective biocatalyst—feedstock combinations was observed. Starting with nature’s best biomass-solubilizing systems may enable a reduction in the amount of non-biological processing required, and in particular substitution of cotreatment for pretreatment. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13068-015-0412-y) contains supplementary material, which is available to authorized users

    Biological lignocellulose solubilization: comparative evaluation of biocatalysts and enhancement via cotreatment

    No full text
    BACKGROUND: Feedstock recalcitrance is the most important barrier impeding cost-effective production of cellulosic biofuels. Pioneer commercial cellulosic ethanol facilities employ thermochemical pretreatment and addition of fungal cellulase, reflecting the main research emphasis in the field. However, it has been suggested that it may be possible to process cellulosic biomass without thermochemical pretreatment using thermophilic, cellulolytic bacteria. To further explore this idea, we examine the ability of various biocatalysts to solubilize autoclaved but otherwise unpretreated cellulosic biomass under controlled but not industrial conditions. RESULTS: Carbohydrate solubilization of mid-season harvested switchgrass after 5 days ranged from 24 % for Caldicellulosiruptor bescii to 65 % for Clostridium thermocellum, with intermediate values for a thermophilic horse manure enrichment, Clostridium clariflavum, Clostridium cellulolyticum, and simultaneous saccharification and fermentation (SSF) featuring a fungal cellulase cocktail and yeast. Under a variety of conditions, solubilization yields were about twice as high for C. thermocellum compared to fungal cellulase. Solubilization of mid-season harvested switchgrass was about twice that of senescent switchgrass. Lower yields and greater dependence on particle size were observed for Populus as compared to switchgrass. Trends observed from data drawn from six conversion systems and three substrates, including both time course and end-point data, were (1) equal fractional solubilization of glucan and xylan, (2) no biological solubilization of the non-carbohydrate fraction of biomass, and (3) higher solubilization for three of the four bacterial cultures tested as compared to the fungal cellulase system. Brief (5 min) ball milling of solids remaining after fermentation of senescent switchgrass by C. thermocellum nearly doubled carbohydrate solubilization upon reinnoculation as compared to a control without milling. Greater particle size reduction and solubilization were observed for milling of partially fermented solids than for unfermented solids. Physical disruption of cellulosic feedstocks after initiation of fermentation, termed cotreatment, warrants further study. CONCLUSIONS: While the ability to achieve significant solubilization of minimally pretreated switchgrass is widespread, a fivefold difference between the most and least effective biocatalyst—feedstock combinations was observed. Starting with nature’s best biomass-solubilizing systems may enable a reduction in the amount of non-biological processing required, and in particular substitution of cotreatment for pretreatment. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13068-015-0412-y) contains supplementary material, which is available to authorized users

    Erratum to: Methods for evaluating medical tests and biomarkers

    No full text
    The original MEMTAB Abstracts in Diagnostic and Prognostic Research contains the incorrect year on individual abstracts in the PDF [1].“Diagnostic and Prognostic Research 2016” under the correspondence line should therefore have been written as “Diagnostic and Prognostic Research 2017” as the journal did not launch until 2017
    corecore