1,326 research outputs found
Optical imaging of the effect of in-plane fields on cholesteric liquid crystals
Sharon A. Jewell and J. Roy Sambles, Physical Review E, Vol. 78, article 012701 (2008). Copyright © 2008 by the American Physical Society.The effects of in-plane electric fields on the director structure of cholesteric liquid crystals has been imaged in three dimensions using fluorescence confocal polarizing microscopy. The results show that a liquid crystal lying outside the electrode gap can be significantly affected by stray fields occurring above the electrode surface, resulting in a 90° rotation of the cholesteric helix. Distinct differences between the behavior of cholesterics with positive and negative dielectric anisotropies are observed
Observations of Colloidal Gold Labelled Platelet Microtubules: High Voltage Electron Microscopy and Low Voltage-High Resolution Scanning Electron Microscopy
18 nm colloidal gold-antitubulin and 4 nm colloidal gold-antitubulin were used to label microtubules in adherent, fully spread platelets. Both sizes of marker effectively labelled microtubules in the partially extracted platelets. However only the 4 nm gold penetrated the dense microfilament matrix of the inner filamentous zone so that portions of microtubules within this cytoskeletal zone could be tracked. The gold marker could be visualized well with 1 MeV high voltage transmission EM and with 5 kV or greater secondary imaging or 20 kV backscattered imaging of carbon only coated samples. 1 kV secondary imaging permitted high resolution imaging of the surface of tubules and the microfilaments with their respective associated material. Individual gold-antibody complexes were difficult to identify by shape alone due to the tendency of the antibody coats to blend together when in very close approximation and due to the presence of other molecules or molecular aggregates similar in size to the gold-antibody labels.
Microtubules were seen to wind in and out of the inner and outer filamentous zones as they encircled the granulomere. Some tubules were seen to dead end at the peripheral web. Numerous smaller microtubule loops were present principally in the outer filamentous zone and tubules could be followed as they went from the outer filamentous zone through the inner filamentous zone and into the granulomere
Helium irradiation effects in polycrystalline Si, silica, and single crystal Si
Transmission electron microscopy (TEM) has been used to investigate the effects of room temperature 6âkeV helium ion irradiation of a thin (â55ânm thick) tri-layer consisting of polycrystalline Si, silica, and single-crystal Si. The ion irradiation was carried out in situ within the TEM under conditions where approximately 24% of the incident ions came to rest in the specimen. This paper reports on the comparative development of irradiation-induced defects (primarily helium bubbles) in the polycrystalline Si and single-crystal Si under ion irradiation and provides direct measurement of a radiation-induced increase in the width of the polycrystalline layer and shrinkage of the silica layer. Analysis using TEM and electron energy-loss spectroscopy has led to the hypothesis that these result from helium-bubble-induced swelling of the silicon and radiation-induced viscoelastic flow processes in the silica under the influence of stresses applied by the swollen Si layers. The silicon and silica layers are sputtered as a result of the helium ion irradiation; however, this is estimated to be a relatively minor effect with swelling and stress-related viscoelastic flow being the dominant mechanisms of dimensional change
Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements
Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of âŒ3.6 ÎŒm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm
The Block Spin Renormalization Group Approach and Two-Dimensional Quantum Gravity
A block spin renormalization group approach is proposed for the dynamical
triangulation formulation of two-dimensional quantum gravity. The idea is to
update link flips on the block lattice in response to link flips on the
original lattice. Just as the connectivity of the original lattice is meant to
be a lattice representation of the metric, the block links are determined in
such a way that the connectivity of the block lattice represents a block
metric. As an illustration, this approach is applied to the Ising model coupled
to two-dimensional quantum gravity. The correct critical coupling is
reproduced, but the critical exponent is obscured by unusually large finite
size effects.Comment: 10 page
Low temperature expansion for the 3-d Ising Model
We compute the weak coupling expansion for the energy of the three
dimensional Ising model through 48 excited bonds. We also compute the
magnetization through 40 excited bonds. This was achieved via a recursive
enumeration of states of fixed energy on a set of finite lattices. We use a
linear combination of lattices with a generalization of helical boundary
conditions to eliminate finite volume effects.Comment: 10 pages, IASSNS-HEP-92/42, BNL-4767
Multi-interaction mean-field renormalization group
We present an extension of the previously proposed mean-field renormalization
method to model Hamiltonians which are characterized by more than just one type
of interaction. The method rests on scaling assumptions about the magnetization
of different sublattices of the given lattice and it generates as many flow
equations as coupling constants without arbitrary truncations on the
renormalized Hamiltonian. We obtain good results for the test case of Ising
systems with an additional second-neighbor coupling in two and three
dimensions. An application of the method is also done to a morphological model
of interacting surfaces introduced recenlty by Likos, Mecke and Wagner [J.
Chem. Phys. {\bf{102}}, 9350 (1995)].
PACS: 64.60.Ak, 64.60.Fr, 05.70.JkComment: Tex file and three macros appended at the end. Five figures available
upon request to: [email protected], Fax: [+]39-40-224-60
Monte Carlo Renormalization of the 3-D Ising model: Analyticity and Convergence
We review the assumptions on which the Monte Carlo renormalization technique
is based, in particular the analyticity of the block spin transformations. On
this basis, we select an optimized Kadanoff blocking rule in combination with
the simulation of a d=3 Ising model with reduced corrections to scaling. This
is achieved by including interactions with second and third neighbors. As a
consequence of the improved analyticity properties, this Monte Carlo
renormalization method yields a fast convergence and a high accuracy. The
results for the critical exponents are y_H=2.481(1) and y_T=1.585(3).Comment: RevTeX, 4 PostScript file
Tracking of fluorescently labeled polymer particles reveals surface effects during shear-controlled aggregation
Surface chemistry is believed to be the key parameter affecting the aggregation and breakage of colloidal suspensions when subjected to shear. To date, only a few works dealt with the understanding of the role of the physical and chemical properties of the particlesâ surface upon aggregation under shear. Previous studies suggested that surface modifications strongly affect polymer particlesâ adhesion, but it was very challenging to demonstrate this effect and monitor these alterations upon prolonged exposure to shear forces. More importantly, the mechanisms leading to these changes remain elusive. In this work, shear-induced aggregation experiments of polymer colloidal particles have been devised with the specific objective of highlighting material transfer and clarifying the role of the softness of the particleâs surface. To achieve this goal, polymer particles with a coreâshell structure comprising fluorescent groups have been prepared so that the surfaceâs softness could be tuned by the addition of monomer acting as a plasticizer and the percentage of fluorescent particles could be recorded over time via confocal microscopy to detect eventual material transfer among different particles. For the first time, material exchange occurring on the soft surface of coreâshell polymer microparticles upon aggregation under shear was observed and proved. More aptly, starting from a 50% labeled/nonlabeled mixture, an increase in the percentage of particles showing a fluorescent signature was recorded over time, reaching a fraction of 70% after 5 h
A Monte Carlo study of leading order scaling corrections of phi^4 theory on a three dimensional lattice
We present a Monte Carlo study of the one-component model on the
cubic lattice in three dimensions. Leading order scaling corrections are
studied using the finite size scaling method. We compute the corrections to
scaling exponent with high precision. We determine the value of the
coupling at which leading order corrections to scaling vanish. Using
this result we obtain estimates for critical exponents that are more precise
than those obtained with field theoretic methods.Comment: 20 pages, two figures; numbers cited from ref. 23 corrected, few
typos correcte
- âŠ