Artificial leaf device for hydrogen generation from immobilised C. reinhardtii microalgae

We developed a fully biomimetic leaf-like device for hydrogen production which allows incorporated fabric-immobilised microalgae culture to be simultaneously hydrated with media and harvested from the produced hydrogen in a continuous flow regime without the need to replace the algal culture. Our leaf device produces hydrogen by direct photolysis of water resulting from redirecting the photosynthetic pathways in immobilised microalgae due to the lack of oxygen. In contrast to the many other reports in the literature on batch photobioreactors producing hydrogen from suspension culture of microalgae, we present the first report where this is done in a continuous manner from a fabric-immobilised microalgae culture. The reported artificial leaf device maximises the sunlight energy utilisation per gram of algae and can be upscaled cheaply and easily to cover large areas. We compared the production of hydrogen from both immobilised and suspended cultures of C. reinhardtii microalgae under sulphur, phosphorus and oxygen deprived conditions. The viability and potential of this approach is clearly demonstrated. Even though this is a first prototype, the hydrogen yield of our artificial leaf device is twenty times higher per gram of algae than in previously the reported batch reactors. Such leaf-like devices could potentially be made from flexible plastic sheets and installed on roofs and other sun-exposed surfaces that are inaccessible by photovoltaic cells. The ability to continuously produce inexpensive hydrogen by positioning inexpensive sheets onto any surface could have an enormous importance in the field of biofuels. The proposed new concept can provide a cleaner and very inexpensive way of bio-hydrogen generation by flexible sheet-like devices

Functional artificial free-standing yeast biofilms

Here we report fabrication of artificial free-standing yeast biofilms built using sacrificial calcium carbonate-coated templates and layer-by-layer assembly of extracellular matrix-mimicking polyelectrolyte multilayers. The free-standing biofilms are freely floating multilayered films of oppositely charged polyelectrolytes and live cells incorporated in the polyelectrolyte layers. Such biofilms were initially formed on glass substrates of circular and ribbon-like shapes coated with thin layers of calcium carbonate microparticles. The templates were then coated with cationic and anionic polyelectrolytes to produce a supporting multilayered thin film. Then the yeast alone or mixed with various micro- and nanoparticle inclusions was deposited onto the multilayer composite films and further coated with outer polyelectrolyte multilayers. To detach the biofilms from the glass substrates the calcium carbonate layer was chemically dissolved yielding free-standing composite biofilms. These artificial biofilms to a certain degree mimic the primitive multicellular and colonial species. We have demonstrated the added functionality of the free-standing artificial biofilms containing magnetic, latex and silver micro- and nanoparticles. We have also developed "symbiotic" multicellular biofilms containing yeast and bacteria. This approach for fabrication of free-standing artificial biofilms can be potentially helpful in development of artificial colonial microorganisms composed of several different unicellular species and an important tool for growing cell cultures free of supporting substrates. © 2011 Elsevier B.V

Magnetically actuated particle-based procedures in continuous flow

We demonstrate a versatile multilaminar flow microfluidic device in which magnetic particles are used as mobile supports for performing two important applications, namely (i) a clinically relevant sandwich immunoassay, and (ii) polye-lectrolyte coating of templates towards the fabrication of microcapsules for drug delivery applications. Furthermore, we demonstrate the use of a different force, diamagnetic repulsion, for deflecting polystyrene particles through a reagent stream with a view to performing multilaminar flow studies on diamagnetic material such as polymer particles and cells

Collective dynamics of colloids at fluid interfaces

The evolution of an initially prepared distribution of micron sized colloidal particles, trapped at a fluid interface and under the action of their mutual capillary attraction, is analyzed by using Brownian dynamics simulations. At a separation \lambda\ given by the capillary length of typically 1 mm, the distance dependence of this attraction exhibits a crossover from a logarithmic decay, formally analogous to two-dimensional gravity, to an exponential decay. We discuss in detail the adaption of a particle-mesh algorithm, as used in cosmological simulations to study structure formation due to gravitational collapse, to the present colloidal problem. These simulations confirm the predictions, as far as available, of a mean-field theory developed previously for this problem. The evolution is monitored by quantitative characteristics which are particularly sensitive to the formation of highly inhomogeneous structures. Upon increasing \lambda\ the dynamics show a smooth transition from the spinodal decomposition expected for a simple fluid with short-ranged attraction to the self-gravitational collapse scenario.Comment: 13 pages, 12 figures, revised, matches version accepted for publication in the European Physical Journal

Quantization of Solitons and the Restricted Sine-Gordon Model

We show how to compute form factors, matrix elements of local fields, in the restricted sine-Gordon model, at the reflectionless points, by quantizing solitons. We introduce (quantum) separated variables in which the Hamiltonians are expressed in terms of (quantum) tau-functions. We explicitly describe the soliton wave functions, and we explain how the restriction is related to an unusual hermitian structure. We also present a semi-classical analysis which enlightens the fact that the restricted sine-Gordon model corresponds to an analytical continuation of the sine-Gordon model, intermediate between sine-Gordon and KdV.Comment: 29 pages, Latex, minor updatin

An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core

Silver nanoparticles have antibacterial properties, but their use has been a cause for concern because they persist in the environment. Here, we show that lignin nanoparticles infused with silver ions and coated with a cationic polyelectrolyte layer form a biodegradable and green alternative to silver nanoparticles. The polyelectrolyte layer promotes the adhesion of the particles to bacterial cell membranes and, together with silver ions, can kill a broad spectrum of bacteria, including Escherichia coli, Pseudomonas aeruginosa and quaternary-amine-resistant Ralstonia sp. Ion depletion studies have shown that the bioactivity of these nanoparticles is time-limited because of the desorption of silver ions. High-throughput bioactivity screening did not reveal increased toxicity of the particles when compared to an equivalent mass of metallic silver nanoparticles or silver nitrate solution. Our results demonstrate that the application of green chemistry principles may allow the synthesis of nanoparticles with biodegradable cores that have higher antimicrobial activity and smaller environmental impact than metallic silver nanoparticles

Direct measurements of the effects of salt and surfactant on interaction forces between colloidal particles at water-oil interfaces

The forces between colloidal particles at a decane-water interface, in the presence of low concentrations of a monovalent salt (NaCl) and of the surfactant sodium dodecylsulfate (SDS) in the aqueous subphase, have been studied using laser tweezers. In the absence of electrolyte and surfactant, particle interactions exhibit a long-range repulsion, yet the variation of the interaction for different particle pairs is found to be considerable. Averaging over several particle pairs was hence found to be necessary to obtain reliable assessment of the effects of salt and surfactant. It has previously been suggested that the repulsion is consistent with electrostatic interactions between a small number of dissociated charges in the oil phase, leading to a decay with distance to the power -4 and an absence of any effect of electrolyte concentration. However, the present work demonstrates that increasing the electrolyte concentration does yield, on average, a reduction of the magnitude of the interaction force with electrolyte concentration. This implies that charges on the water side also contribute significantly to the electrostatic interactions. An increase in the concentration of SDS leads to a similar decrease of the interaction force. Moreover the repulsion at fixed SDS concentrations decreases over longer times. Finally, measurements of three-body interactions provide insight into the anisotropic nature of the interactions. The unique time-dependent and anisotropic interactions between particles at the oil-water interface allow tailoring of the aggregation kinetics and structure of the suspension structure.Comment: Submitted to Langmui

Non-monotonic variation with salt concentration of the second virial coefficient in protein solutions

The osmotic virial coefficient $B_2$ of globular protein solutions is calculated as a function of added salt concentration at fixed pH by computer simulations of the ``primitive model''. The salt and counter-ions as well as a discrete charge pattern on the protein surface are explicitly incorporated. For parameters roughly corresponding to lysozyme, we find that $B_2$ first decreases with added salt concentration up to a threshold concentration, then increases to a maximum, and then decreases again upon further raising the ionic strength. Our studies demonstrate that the existence of a discrete charge pattern on the protein surface profoundly influences the effective interactions and that non-linear Poisson Boltzmann and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory fail for large ionic strength. The observed non-monotonicity of $B_2$ is compared to experiments. Implications for protein crystallization are discussed.Comment: 43 pages, including 17 figure

“A long-term mortality analysis of subsidized firms in rural areas: an empirical study in the Portuguese Alentejo region”

Studies have demonstrated that public policies to support private firms’ investment have the ability to promote entrepreneurship, but the sustainability of subsidized firms has not often been analysed. This paper aims to examine this dimension specifically through evaluating the mortality of subsidized firms in the long-term. The analysis focuses on a case study of the LEADER+ Programme in the Alentejo region of Portugal. With this purpose, the paper examines the activity status (active or not active) of 154 private, rural, for-profit firms in Alentejo that had received a subsidy to support investment between 2002 and 2008 under the LEADER+ Programme. The methodology is based on binary choice models in order to study the probability of these firms still being active. The explanatory variables used are the following: (1) the characteristics of entrepreneurs and managers’ strategic decisions, (2) firm profile and characteristics, (3) regional economic environment. Data assessment showed that the cumulative mortality rate of firms on 31st December 2013 is over 20 %. Interpretation of the regression model revealed that he probability of firms’ survival increases with higher investment, firm age and regional business concentration, whereas the number of applications made by firms has a negative impact on their survival. So it seems that for subsidized firms the amount of investment is as important as its frequency

From harmful Microcystis blooms to multi-functional core-double-shell microsphere bio-hydrochar materials

Harmful algal blooms (HABs) induced by eutrophication is becoming a serious global environmental problem affecting public health and aquatic ecological sustainability. A novel strategy for the utilization of biomass from HABs was developed by converting the algae cells into hollow mesoporous biohydrochar microspheres via hydrothermal carbonization method. The hollow microspheres were used as microreactors and carriers for constructing CaO2 core-mesoporous shell-CaO2 shell microspheres (OCRMs). The CaO2 shells could quickly increase dissolved oxygen to extremely anaerobic water in the initial 40 min until the CaO2 shells were consumed. The mesoporous shells continued to act as regulators restricting the release of oxygen from CaO2 cores. The oxygen-release time using OCRMs was 7 times longer than when directly using CaO2. More interestingly, OCRMs presented a high phosphate removal efficiency (95.6%) and prevented the pH of the solution from rising to high levels in comparison with directly adding CaO2 due to the OH− controlled-release effect of OCRMs. The distinct core-doubleshell micro/nanostructure endowed the OCRMs with triple functions for oxygen controlled-release, phosphorus removal and less impact on water pH. The study is to explore the possibility to prepare smarter bio-hydrochar materials by utilizing algal blooms