Utilization of CT scanning associated with complex spine surgery.

BackgroundDue to the risk associated with exposure to ionizing radiation, there is an urgent need to identify areas of CT scanning overutilization. While increased use of diagnostic spinal imaging has been documented, no previous research has estimated the magnitude of follow-up imaging used to evaluate the postoperative spine.MethodsThis retrospective cohort study quantifies the association between spinal surgery and CT utilization. An insurance database (Humana, Inc.) with ≈ 19 million enrollees was employed, representing 8 consecutive years (2007-2014). Surgical and imaging procedures were captured by anatomic-specific CPT codes. Complex surgeries included all cervical, thoracic and lumbar instrumented spine fusions. Simple surgeries included discectomy and laminectomy. Imaging was restricted to CT and MRI. Postoperative imaging frequency extended to 5-years post-surgery.ResultsThere were 140,660 complex spinal procedures and 39,943 discectomies and 49,889 laminectomies. MRI was the predominate preoperative imaging modality for all surgical procedures (median: 80%; range: 73-82%). Postoperatively, CT prevalence following complex procedures increased more than two-fold from 6 months (18%) to 5 years (≥40%), and patients having a postoperative CT averaged two scans. For simple procedures, the prevalence of postoperative CT scanning never exceeded 30%.ConclusionsCT scanning is used frequently for follow-up imaging evaluation following complex spine surgery. There is emerging evidence of an increased cancer risk due to ionizing radiation exposure with CT. In the setting of complex spine surgery, actions to mitigate this risk should be considered and include reducing nonessential scans, using the lowest possible radiation dose protocols, exerting greater selectivity in monitoring the developing fusion construct, and adopting non-ferromagnetic implant biomaterials that facilitate MRI postoperatively

Experimental Shear Study on Reinforced High Strength Concrete Beams Made Using Blended Cement

With the increased application of High Strength Concrete (HSC) inconstruction and lack of proper guidelines for structural design in India,behavioral study of high strength concrete is an important aspect ofresearch. Research on the behavior of HSC reinforced beams with concretestrength more than 60 MPa has been carried out in the past and is stillcontinuing to understand the structural behavior of HSC beams. Along withthe many benefits of the high strength concrete, the more brittle behavior isof concern which leads to sudden failure. This paper presents the behaviorof reinforced HSC beams in shear with considering the effects of variousfactors like shear reinforcement ratio, longitudinal reinforcement ratio, l/dratio (length to depth ratio), etc. Ten numbers Reinforced Concrete Beamsof various sizes using concrete mix with three different w/c ratios (0.46, 0.26and 0.21) were cast for shear strength assessment. The beams were tested insimply supported condition over two fixed steel pedestals with load rate of0.2 mm/minute in displacement control. Mid-point deflection was measuredusing LVDT. A comparative analysis of theoretical approaches of Eurocode, extension of current IS code up to M90 and the experimental datawas done to understand the behavior of beams. Shear capacities of beamswithout any factors of safety were used to assess the actual capacities andthen was compared with the experimental capacity obtained. Results ofthis study can be used in the design of high strength concrete and will bemore reliable in Indian continent as the regional materials and exposureconditions were considered

Transient Local Bone Remodeling Effects of rhBMP-2 in an Ovine Interbody Spine Fusion Model

Background: Recombinant human bone morphogenetic protein-2 (rhBMP-2) is a powerful osteoinductive morphogen capable of stimulating the migration of mesenchymal stem cells (MSCs) to the site of implantation and inducing the proliferation and differentiation of these MSCs into osteoblasts. Vertebral end-plate and vertebral body resorption has been reported after interbody fusion with high doses of rhBMP-2. In this study, we investigated the effects of 2 rhBMP-2 doses on peri-implant bone resorption and bone remodeling at 7 time points in an end-plate-sparing ovine interbody fusion model. Methods: Twenty-one female sheep underwent an end-plate-sparing discectomy followed by interbody fusion at L2-L3 and L4-L5 using a custom polyetheretherketone (PEEK) interbody fusion device. The PEEK interbody device was filled with 1 of 2 different doses of rhBMP-2 on an absorbable collagen sponge (ACS): 0.13 mg (1·) or 0.90 mg (7·). Bone remodeling and interbody fusion were assessed via high-resolution radiography and histological analyses at 1, 2, 3, 4, 8, 12, and 20 weeks postoperatively. Results: Peri-implant bone resorption peaked between 3 and 8 weeks in both the 1· and the 7· rhBMP-2/ACS-dose group. Osteoclastic activity and corresponding peri-implant bone resorption was dose-dependent, with moderate-tomarked resorption at the 7·-dose level and less resorption at the 1·-dose level. Both dose (p \u3c 0.0007) and time (p \u3c 0.0025) affected bone resorption significantly. Transient bone-resorption areas were fully healed by 12 weeks. Osseous bridging was seen at all but 1 spinal level at 12 and at 20 weeks. Conclusions: In the ovine end-plate-sparing interbody fusion model, rhBMP-2 dose-dependent osteoclastic resorption is a transient phenomenon that peaks at 4 weeks postoperatively. Clinical Relevance: Using the U.S. Food and Drug Administration (FDA)-approved rhBMP-2 concentration and matching the volume of rhBMP-2/ACS with the volume of desired bone formation within the interbody construct may limit the occurrence of transient bone resorption

Use of bottom ash as part replacement of sand for making concrete blocks

Coal-based thermal power plants all over the world facing serious problems of handling and disposal of the ash produced. The productive use of coal Bottom Ash (BA) is the best way to alleviate the problems associated with its disposal. This paper covers the studies on laboratory scale evaluation of vibro compaction concrete blocks using BA I, BA II & BA III collected from three different location of Coal Fed Thermal Power Station. In the present investigation laboratory investigation have been carried to utilize BA as part replacement of sand in concrete. This study cover manufacture of concrete blocks without flyash & with BA using for making solid block as per specification laid down in IS:2185 using vibro compaction machine. Three different sources of BA were used in concrete mix each @ 30%, 40% & 50% replacement by weight of sand were adopted in making concrete blocks. Comparative study of compressive strength of concrete at different age of curing, wet density, drying shrinkage is reported in this study. Wet density is found to be lower in blocks containing BA & dry shrinkage values are found well within the limits of specifications. Concrete Blocks having BA @ 30% by weight of sand are found suitable for use in the manufacture of concrete blocks

Avalanche photodiodes for the CMS electromagnetic calorimeter

Avalanche photodiodes(APD's) will be used as photodetectors in the CMS barrel electromagnetic crystal calorimeter for high precision energy measurements in a hostile radiation environment. Significant progress has been made in the characteristics of these devices being expressly developed for CMS. Parameters of the final structure APD's together with demonstrations of radiation hardness and plans for quality assurance/control during the production phase are presented

SDOCT Imaging to Identify Macular Pathology in Patients Diagnosed with Diabetic Maculopathy by a Digital Photographic Retinal Screening Programme

INTRODUCTION: Diabetic macular edema (DME) is an important cause of vision loss. England has a national systematic photographic retinal screening programme to identify patients with diabetic eye disease. Grading retinal photographs according to this national protocol identifies surrogate markers for DME. We audited a care pathway using a spectral-domain optical coherence tomography (SDOCT) clinic to identify macular pathology in this subset of patients. METHODS: A prospective audit was performed of patients referred from screening with mild to moderate non-proliferative diabetic retinopathy (R1) and surrogate markers for diabetic macular edema (M1) attending an SDOCT clinic. The SDOCT images were graded by an ophthalmologist as SDOCT positive, borderline or negative. SDOCT positive patients were referred to the medical retina clinic. SDOCT negative and borderline patients were further reviewed in the SDOCT clinic in 6 months. RESULTS: From a registered screening population of 17 551 patients with diabetes mellitus, 311 patients met the inclusion criteria between (March 2008 and September 2009). We analyzed images from 311 patients' SDOCT clinic episodes. There were 131 SDOCT negative and 12 borderline patients booked for revisit in the OCT clinic. Twenty-four were referred back to photographic screening for a variety of reasons. A total of 144 were referred to ophthalmology with OCT evidence of definite macular pathology requiring review by an ophthalmologist. DISCUSSION: This analysis shows that patients with diabetes, mild to moderate non-proliferative diabetic retinopathy (R1) and evidence of diabetic maculopathy on non-stereoscopic retinal photographs (M1) have a 42.1% chance of having no macular edema on SDOCT imaging as defined by standard OCT definitions of DME when graded by a retinal specialist. SDOCT imaging is a useful adjunct to colour fundus photography in screening for referable diabetic maculopathy in our screening population

The development and validation of a scoring tool to predict the operative duration of elective laparoscopic cholecystectomy

Background: The ability to accurately predict operative duration has the potential to optimise theatre efficiency and utilisation, thus reducing costs and increasing staff and patient satisfaction. With laparoscopic cholecystectomy being one of the most commonly performed procedures worldwide, a tool to predict operative duration could be extremely beneficial to healthcare organisations. Methods: Data collected from the CholeS study on patients undergoing cholecystectomy in UK and Irish hospitals between 04/2014 and 05/2014 were used to study operative duration. A multivariable binary logistic regression model was produced in order to identify significant independent predictors of long (> 90 min) operations. The resulting model was converted to a risk score, which was subsequently validated on second cohort of patients using ROC curves. Results: After exclusions, data were available for 7227 patients in the derivation (CholeS) cohort. The median operative duration was 60 min (interquartile range 45–85), with 17.7% of operations lasting longer than 90 min. Ten factors were found to be significant independent predictors of operative durations > 90 min, including ASA, age, previous surgical admissions, BMI, gallbladder wall thickness and CBD diameter. A risk score was then produced from these factors, and applied to a cohort of 2405 patients from a tertiary centre for external validation. This returned an area under the ROC curve of 0.708 (SE = 0.013, p  90 min increasing more than eightfold from 5.1 to 41.8% in the extremes of the score. Conclusion: The scoring tool produced in this study was found to be significantly predictive of long operative durations on validation in an external cohort. As such, the tool may have the potential to enable organisations to better organise theatre lists and deliver greater efficiencies in care